View HD74LVC2244A_4237602.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HD74LVC2244A
Octal Buffers / Line Drivers with 3-state Outputs
REJ03D0376-0300 (Previous ADE-205-234A (Z)) Rev.3.00 Aug. 20, 2004
Description
The HD74LVC2244A has eight line drivers with three state outputs in a 20 pin package. This device is a noninverting buffer and has two active low enables (1G and 2G). Each enable independently controls four buffers. All outputs, which are designed to sink up to 12mA, include equivalent 26 resistors to reduce overshoot and undershoot. Low voltage and high-speed operation is suitable at battery drive product (note type personal computer) and low power consumption extends the life of a battery for long time operation.
Features
* * * * * * * * VCC = 1.65 to 5.5 V All inputs VIH (Max) = 5.5 V (@VCC = 0 to 5.5 V) All outputs VO (Max) = 5.5 V (@VCC = 0 V or output off state) Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25C) Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25C) High output current 12mA (@VCC = 3.0 to 5.5 V) All outputs have equivalent 26 series resistors, so no external resistors are required Ordering Information
Package Type SOP-20 pin (JEITA) TSSOP-20 pin Package Code FP-20DAV TTP-20DAV Package Abbreviation FP T Taping Abbreviation (Quantity) EL (2,000 pcs/reel) ELL (2,000 pcs/reel)
Part Name HD74LVC2244AFPEL HD74LVC2244ATELL
Note: Please consult the sales office for the above package availability.
Function Table
Inputs G H L L H: High level L: Low level X: Immaterial Z: High impedance A X H L Output Y Z H L
Rev.3.00 Aug. 20, 2004 page 1 of 9
HD74LVC2244A
Pin Arrangement
1G 1 1A1 2Y4 2 3
20 VCC 19 2G 18 1Y1 17 2A4 16 1Y2 15 2A3 14 1Y3 13 2A2 12 1Y4 11 2A1
1A2 4 2Y3 1A3 2Y2 1A4 2Y1 5 6 7 8 9
GND 10
(Top view)
Absolute Maximum Ratings
Item Supply voltage Input voltage Output voltage Input diode current Output diode current Output current VCC, GND current Storage temperature Symbol VCC VI VO IIK IOK IO ICC or IGND Tstg Ratings -0.5 to 7.0 -0.5 to 7.0 -0.5 to 7.0 -0.5 to VCC+0.5 -50 -50 50 100 -65 to 150 Unit V V V mA mA mA mA C Conditions
Output "Z" or VCC : OFF Output "H" or "L" VI < 0 VO < 0
Note: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two of which may be realized at the same time.
Rev.3.00 Aug. 20, 2004 page 2 of 9
HD74LVC2244A
Recommended Operating Conditions
Item Supply voltage Input voltage Output voltage Output current Symbol VCC VI VO IOH Ratings 1.65 to 5.5 1.5 to 5.5 0 to 5.5 0 to 5.5 0 to VCC -2 -4 -8 -12 2 4 8 12 0 to 6 -40 to +85 Unit V V V mA Conditions At operation Data retention only Output "Z" or VCC : OFF Output "H" or "L" VCC = 1.65 V VCC = 2.3 V VCC = 2.7 V VCC = 3.0 to 5.5 V VCC = 1.65 V VCC = 2.3 V VCC = 2.7 V VCC = 3.0 to 5.5 V
IOL
mA
Input rise / fall time Operating temperature
tr, tf Ta
ns / V C
Logic Diagram
1G 1A1
1
2G
18
19
2
1Y1
2A1
11
9
2Y1
1A2
4
16
1Y2
2A2
13
7
2Y2
1A3
6
14
1Y3
2A3
15
5
2Y3
1A4
8
12
1Y4
2A4
17
3
2Y4
Rev.3.00 Aug. 20, 2004 page 3 of 9
HD74LVC2244A
Electrical Characteristics
(Ta = -40 to 85C) Item Input voltage Symbol VIH VCC (V) 1.65 to 1.95 2.3 to 2.7 2.7 to 3.6 4.5 to 5.5 1.65 to 1.95 2.3 to 2.7 2.7 to 3.6 4.5 to 5.5 1.65 to 5.5 1.65 2.3 2.7 3.0 2.7 3.0 4.5 1.65 to 5.5 1.65 2.3 2.7 3.0 2.7 3.0 4.5 0 to 5.5 1.65 to 5.5 0 1.65 to 3.6 1.65 to 5.5 2.7 to 3.6 3.3 3.3 Min VCCx0.65 1.7 2.0 VCCx0.7 -- -- -- -- VCC-0.2 1.2 1.7 2.2 2.4 2.0 2.0 3.6 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Typ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 3.4 9.0 Max -- -- -- -- VCCx0.35 0.7 0.8 VCCx0.3 -- -- -- -- -- -- -- -- 0.2 0.45 0.7 0.4 0.55 0.6 0.8 0.8 5 5 5 10 10 500 -- -- Unit V Test Conditions
VIL
V
Output voltage
VOH
V
IOH = -100 A IOH = -2 mA IOH = -4 mA IOH = -6 mA IOH = -8 mA IOH = -12 mA
VOL
V
IOL = 100 A IOL = 2 mA IOL = 4 mA IOL = 6 mA IOL = 8 mA IOL = 12 mA
Input current Off state output current Output leak current Quiescent supply current
IIN IOZ IOFF ICC ICC
A A A A A pF pF
VIN = 0 to 5.5 V VOUT = 0 to 5.5 V VIN or VO = 5.5 V VIN = 3.6 to 5.5 V *1, IO = 0 VIN = VCC or GND VIN = one input at (VCC-0.6)V, other inputs at VCC or GND VIN = VCC or GND VOUT = VCC or GND
Input capacitance CIN Output capacitance CO Note:
1. This applies in the disabled state only.
Rev.3.00 Aug. 20, 2004 page 4 of 9
HD74LVC2244A
Switching Characteristics
FROM (Input) A (Ta = -40 to 85C) TO (Output) Y
Item Propagation delay time
Symbol tPLH tPHL
Output enable time
tZH tZL
Output disable time
tHZ tLZ
VCC (V) 1.80.15 2.50.2 2.7 3.30.3 5.00.5 1.80.15 2.50.2 2.7 3.30.3 5.00.5 1.80.15 2.50.2 2.7 3.30.3 5.00.5 1.80.15 2.50.2 2.7 3.30.3 5.00.5
Min -- -- -- 1.5 -- -- -- -- 1.0 -- -- -- -- 1.5 -- -- -- -- -- --
Typ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Max 10.5 7.0 6.4 5.5 4.1 13.0 9.0 8.1 7.1 5.6 10.0 8.0 7.3 6.8 5.7 2.0 2.0 1.5 1.0 1.0
Unit ns
ns
G
Y
ns
G
Y
Between output pin skew *1 tOSLH tOSHL
ns
Note:
1. This parameter is characterized but not tested. tOSLH = |tPLHm-tPLHn|, tOSHL = |tPHLm-tPHLn|
Rev.3.00 Aug. 20, 2004 page 5 of 9
HD74LVC2244A
Test Circuit
(VCC = 1.80.15 V, VCC = 2.50.2 V)
VCC VCC Output 1G, 2G Input Pulse generator Zout = 50 R1 1Y1 to 2Y4 1A1 to 2A4 C L= 30 pF R2
50 Scope
See Function Table
S1
OPEN 2xVCC GND
VCC (V) 1.80.15 2.50.2
R1 1 k 500
R2 950 450
Symbol t PLH / t PHL t ZH / t HZ t ZL / t LZ
S1 OPEN GND 2xVCC
Note: 1. C L includes probe and jig capacitance.
(VCC = 2.7 V, VCC = 3.30.3 V, VCC = 5.00.5 V)
VCC VCC Output 1G, 2G Input Pulse generator Zout = 50 500 1Y1 to 2Y4 1A1 to 2A4 C L= 50 pF 450
50 Scope
See Function Table
S1
*1
OPEN See under table GND
Symbol t PLH / t PHL t ZH/ t HZ t ZL / t LZ Note: 1. C L includes probe and jig capacitance.
S1
Vcc=2.7V, 3.30.3V Vcc=5.00.5V
OPEN GND 6V
OPEN GND 2xVCC
Rev.3.00 Aug. 20, 2004 page 6 of 9
HD74LVC2244A Waveforms
(VCC = 1.80.15 V, VCC = 2.50.2 V)
* Waveforms - 1
tr 90 % 50% VCC t PLH 90 % 50% VCC
tf VCC 10 % t PHL GND
Input A 10 %
VOH Output Y 50% VCC 50% VCC VOL
* Waveforms - 2
tf 90 % 50% VCC 10 % t ZL 10 % t LZ tr 90 % 50% VCC VCC GND VCC Waveform - A 50% VCC t ZH t HZ VOH - 0.15 V VOL + 0.15 V VOL VOH GND
Input G
Waveform - B
50% VCC
Notes: 1. Input waveform : PRR = 10 MHz, duty cycle 50%, t r = 2.0 ns, t f = 2.0 ns 2. Waveform - A shows input conditions such that the output is "L" level when enabled by the output control. 3. Waveform - B shows input conditions such that the output is "H" level when enabled by the output control.
Rev.3.00 Aug. 20, 2004 page 7 of 9
HD74LVC2244A
(VCC = 2.7 V, VCC = 3.30.3 V, VCC = 5.00.5 V)
* Waveforms - 1
tr 90 % 90 % Vref
tf VIH 10 % t PLH t PHL GND
Input A 10 %
Vref
VOH Output Y Vref Vref VOL
* Waveforms - 2
tf 90 % Vref 10 % t ZL 10 % t LZ tr 90 % Vref GND VOH1 Waveform - A Vref t ZH t HZ VOH - 0.3 V VOL + 0.3 V VOL VOH VOL1 TEST VIH Vref VOH1 VOL1
Vcc=2.7V, 3.30.3V Vcc=5.00.5V
VIH
Input G
Waveform - B
Vref
2.7 V 1.5 V 3V GND
VCC 50%VCC VCC GND
Notes: 1. Input waveform : PRR = 10 MHz, duty cycle 50%, t r = 2.5 ns, t f = 2.5 ns 2. Waveform - A shows input conditions such that the output is "L" level when enabled by the output control. 3. Waveform - B shows input conditions such that the output is "H" level when enabled by the output control.
Rev.3.00 Aug. 20, 2004 page 8 of 9
HD74LVC2244A
Package Dimensions
As of January, 2002
12.6 13 Max
20
Unit: mm
11
1
10
5.5
0.80 Max
2.20 Max
*0.20 0.05
0.20 7.80 + 0.30 -
1.15
1.27
*0.40 0.06
0.10 0.10
0 - 8
0.70 0.20
0.15
0.12 M
*Pd plating
Package Code JEDEC JEITA Mass (reference value)
FP-20DAV -- Conforms 0.31 g
As of January, 2002
Unit: mm
6.50 6.80 Max 20 11
1
10 0.65 1.0 6.40 0.20 0.65 Max
*0.20 0.05
0.13 M
4.40
*0.15 0.05
1.10 Max
0.10
0.07 +0.03 -0.04
0 - 8
0.50 0.10
*Pd plating
Package Code JEDEC JEITA Mass (reference value)
TTP-20DAV -- -- 0.07 g
Rev.3.00 Aug. 20, 2004 page 9 of 9
Sales Strategic Planning Div.
Keep safety first in your circuit designs!
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
RENESAS SALES OFFICES
Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001
http://www.renesas.com
(c) 2004. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .1.0

▲Up To Search▲

Price & Availability of HD74LVC2244A

	To Download HD74LVC2244A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .