 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PD - 96106 IRF7307QPBF HEXFET(R) Power MOSFET D1 D1 D2 D2 l l l l l l l l Advanced Process Technology Ultra Low On-Resistance Dual N and P Channel MOSFET Surface Mount Available in Tape & Reel 150C Operating Temperature Automotive [Q101] Qualified Lead-Free S1 G1 S2 G2 N-CHANNEL MOSFET 1 8 2 3 4 7 N-Ch VDSS 20V P-Ch -20V 6 5 P-CHANNEL MOSFET Top View RDS(on) 0.050 0.090 Description Specifically designed for Automotive applications, these HEXFET(R) Power MOSFET's in a Dual SO-8 package utilize the lastest processing techniques to achieve extremely low on-resistance per silicon area. Additional features of these Automotive qualified HEXFET Power MOSFET's are a 150C junction operating temperature, fast switching speed and improved repetitive avalanche rating. These benefits combine to make this design an extremely efficient and reliable device for use in Automotive applications and a wide variety of other applications. The efficient SO-8 package provides enhanced thermal characteristics and dual MOSFET die capability making it ideal in a variety of power applications. This dual, surface mount SO-8 can dramatically reduce board space and is also available in Tape & Reel. SO-8 Absolute Maximum Ratings Parameter I D @ TA = 25C ID @ TA = 25C I D @ TA = 70C IDM P D @TA = 25C VGS dv/dt TJ, TSTG 10 Sec. Pulse Drain Current, VGS @ 4.5V Continuous Drain Current, VGS @ 4.5V Continuous Drain Current, VGS @ 4.5V Pulsed Drain Current Power Dissipation Linear Derating Factor Gate-to-Source Voltage Peak Diode Recovery dv/dt Junction and Storage Temperature Range Max. N-Channel 5.7 5.2 4.1 21 2.0 0.016 12 5.0 -55 to + 150 -5.0 P-Channel -4.7 -4.3 -3.4 -17 Units A W W/C V V/ns C Thermal Resistance Ratings Parameter RJA Maximum Junction-to-Ambient Typ. Max. 62.5 Units C/W www.irf.com 1 07/23/07 IRF7307QPBF Electrical Characteristics @ TJ = 25C (unless otherwise specified) Parameter V (BR)DSS Drain-to-Source Breakdown Voltage N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-P N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-P N-P N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch Min. Typ. Max. 20 -20 0.044 -0.012 0.050 0.070 0.090 0.140 0.70 -0.70 8.30 4.00 1.0 -1.0 25 -25 100 20 22 2.2 3.3 8.0 9.0 9.0 8.4 42 26 32 51 51 33 4.0 6.0 660 610 280 310 140 170 Units V V/C V S A Conditions VGS = 0V, ID = 250A VGS = 0V, ID = -250A Reference to 25C, ID = 1mA Reference to 25C, ID = -1mA VGS = 4.5V, ID = 2.6A VGS = 2.7V, ID = 2.2A VGS = -4.5V, ID = -2.2A VGS = -2.7V, ID = -1.8A VDS = VGS, I D = 250A VDS = VGS, I D = -250A VDS = 15V, I D = 2.6A VDS = -15V, I D = -2.2A VDS = 16V, VGS = 0V VDS = -16V, V GS = 0V, VDS = 16V, VGS = 0V, TJ = 125C VDS = -16V, V GS = 0V, TJ = 125C VGS = 12V N-Channel I D = 2.6A, VDS = 16V, VGS = 4.5V P-Channel I D = -2.2A, VDS = -16V, VGS = -4.5V N-Channel VDD = 10V, ID = 2.6A, RG = 6.0, RD = 3.8 P-Channel VDD = -10V, ID = -2.2A, RG = 6.0, RD = 4.5 Between lead tip and center of die contact N-Channel VGS = 0V, VDS = 15V, = 1.0MHz P-Channel VGS = 0V, VDS = -15V, = 1.0MHz V(BR)DSS/TJ Breakdown Voltage Temp. Coefficient RDS(ON) V GS(th) g fs I DSS IGSS Qg Qgs Qgd td(on) tr td(off) tf LD LS Ciss Coss Crss Static Drain-to-Source On-Resistance Gate Threshold Voltage Forward Transconductance Drain-to-Source Leakage Current Gate-to-Source Forward Leakage Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Internal Drain Inductace Internal Source Inductance Input Capacitance Output Capacitance Reverse Transfer Capacitance nC ns nH pF Source-Drain Ratings and Characteristics Parameter IS I SM VSD trr Qrr ton Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-Ch P-Ch N-P Min. Typ. Max. Units Conditions 2.5 -2.5 A 21 -17 1.0 TJ = 25C, IS = 1.8A, VGS = 0V V -1.0 TJ = 25C, IS = -1.8A, VGS = 0V 29 44 N-Channel ns 56 84 TJ = 25C, IF = 2.6A, di/dt = 100A/s 22 33 P-Channel nC TJ = 25C, IF = -2.2A, di/dt = 100A/s 71 110 Intrinsic turn-on time is neglegible (turn-on is dominated by LS+LD) Repetitive rating; pulse width limited by Notes: max. junction temperature. ( See fig. 23 ) Pulse width 300s; duty cycle 2%. Surface mounted on FR-4 board, t 10sec. N-Channel ISD 2.6A, di/dt 100A/s, VDD V(BR)DSS, TJ 150C www.irf.com P-Channel ISD -2.2A, di/dt 50A/s, VDD V(BR)DSS, TJ 150C 2 N-Channel 1000 VGS 7.5V 5.0V 4.0V 3.5V 3.0V 2.5V 2.0V BOTTOM 1.5V TOP IRF7307QPBF 1000 I , Drain-to-Source Current (A) D I , Drain-to-Source Current (A) D VGS 7.5V 5.0V 4.0V 3.5V 3.0V 2.5V 2.0V BOTTOM 1.5V TOP 100 100 10 10 1.5V 20s PULSE WIDTH TJ = 150C A 1 10 100 1.5V 1 0.1 1 20s PULSE WIDTH TJ = 25C A 10 100 1 0.1 VDS , Drain-to-Source Voltage (V) VDS , Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics 100 Fig 2. Typical Output Characteristics 2.0 T = 25C J TJ = 150C R DS(on) , Drain-to-Source On Resistance (Normalized) ID = 4.3A I D , Drain-to-Source Current (A) 1.5 10 1.0 0.5 1 1.5 2.0 2.5 3.0 VDS = 15V 20s PULSE WIDTH 3.5 4.0 4.5 5.0 A 0.0 -60 -40 -20 VGS = 4.5V 0 20 40 60 80 100 120 140 160 A VGS , Gate-to-Source Voltage (V) TJ , Junction Temperature (C) Fig 3. Typical Transfer Characteristics 1200 Fig 4. Normalized On-Resistance Vs. Temperature 10 V GS , Gate-to-Source Voltage (V) V GS = 0V, f = 1MHz C iss = Cgs + C gd , Cds SHORTED C rss = C gd C oss = C ds + C gd I D = 2.6A VDS = 16V 8 C, Capacitance (pF) 900 Ciss 6 600 Coss 4 300 Crss 2 0 1 10 100 A 0 0 5 10 FOR TEST CIRCUIT SEE FIGURE 11 15 20 25 A V DS , Drain-to-Source Voltage (V) Q G , Total Gate Charge (nC) Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage www.irf.com 3 IRF7307QPBF 100 N-Channel 100 ISD , Reverse Drain Current (A) OPERATION IN THIS AREA LIMITED BY RDS(on) 10 ID , Drain Current (A) 100us 10 1ms TJ = 150C TJ = 25C 1 0.1 0.0 0.5 1.0 1.5 VGS = 0V 2.0 A 2.5 1 0.1 TA = 25 C TJ = 150 C Single Pulse 1 10 10ms 100 VSD , Source-to-Drain Voltage (V) VDS , Drain-to-Source Voltage (V) Fig 7. Typical Source-Drain Diode Forward Voltage 6.0 5.0 Fig 8. Maximum Safe Operating Area VDS VGS RG 4.5V Pulse Width 1 s Duty Factor 0.1 % RD I D , Drain Current (A) D.U.T. + 4.0 V - DD 3.0 2.0 1.0 Fig 10a. Switching Time Test Circuit 25 50 75 100 125 150 0.0 TC , Case Temperature ( C) VDS 90% Fig 9. Maximum Drain Current Vs. Ambient Temperature Current Regulator Same Type as D.U.T. 10% VGS td(on) tr t d(off) tf 50K 12V .2F .3F Fig 10b. Switching Time Waveforms D.U.T. + V - DS 4.5V QGS QG QGD VGS 3mA VG IG ID Charge Current Sampling Resistors Fig 11a. Gate Charge Test Circuit Fig 11b. Basic Gate Charge Waveform www.irf.com 4 P-Channel 100 TOP VGS - 7.5V - 5.0V - 4.0V - 3.5V - 3.0V - 2.5V - 2.0V BOTTOM - 1.5V IRF7307QPBF 100 -ID , Drain-to-Source Current (A) 10 -ID , Drain-to-Source Current (A) VGS - 7.5V - 5.0V - 4.0V - 3.5V - 3.0V - 2.5V - 2.0V BOTTOM - 1.5V TOP 10 1 1 -1.5V -1.5V 20s PULSE WIDTH TJ = 25C A 0.1 1 10 100 0.1 0.01 0.1 0.01 20s PULSE WIDTH TJ = 150C 0.1 1 10 100 A -VDS , Drain-to-Source Voltage (V) -VDS , Drain-to-Source Voltage (V) Fig 12. Typical Output Characteristics 100 Fig 13. Typical Output Characteristics 2.0 R DS(on) , Drain-to-Source On Resistance (Normalized) I D = -3.6A -ID , Drain-to-Source Current (A) TJ = 25C 10 1.5 TJ = 150C 1.0 1 0.5 0.1 1.5 2.0 2.5 3.0 VDS = -15V 20s PULSE WIDTH 3.5 4.0 4.5 5.0 A 0.0 -60 VGS = -4.5V -40 -20 0 20 40 60 80 100 120 140 160 A -VGS , Gate-to-Source Voltage (V) TJ , Junction Temperature (C) Fig 14. Typical Transfer Characteristics 1500 Fig 15. Normalized On-Resistance Vs. Temperature 10 -VGS , Gate-to-Source Voltage (V) V GS = 0V, f = 1MHz C iss = Cgs + C gd , Cds SHORTED C rss = C gd C oss = C ds + C gd I D = -2.2A VDS = -16V 8 C, Capacitance (pF) Ciss 1000 Coss Crss 500 6 4 2 0 1 10 100 A 0 0 5 10 FOR TEST CIRCUIT SEE FIGURE 22 15 20 25 A -VDS , Drain-to-Source Voltage (V) Q G , Total Gate Charge (nC) Fig 16. Typical Capacitance Vs. Drain-to-Source Voltage www.irf.com Fig 17. Typical Gate Charge Vs. Gate-to-Source Voltage 5 IRF7307QPBF 100 P-Channel 100 -ISD , Reverse Drain Current (A) OPERATION IN THIS AREA LIMITED BY RDS(on) 10 TJ = 150C TJ = 25C -ID , Drain Current (A) I 10 1ms 1 0.1 0.3 0.6 0.9 1.2 VGS = 0V A 1 TA = 25 C TJ = 150 C Single Pulse 1 10 10ms 1.5 100 -VSD , Source-to-Drain Voltage (V) -VDS , Drain-to-Source Voltage (V) Fig 18. Typical Source-Drain Diode Forward Voltage 5.0 Fig 19. Maximum Safe Operating Area VDS VGS RG RD 4.0 D.U.T. + -ID , Drain Current (A) 3.0 -4.5V 2.0 Pulse Width 1 s Duty Factor 0.1 % 1.0 Fig 21a. Switching Time Test Circuit 25 50 75 100 125 150 0.0 TC , Case Temperature ( C) VDS 90% Fig 20. Maximum Drain Current Vs. Ambient Temperature Current Regulator Same Type as D.U.T. 10% VGS td(on) tr t d(off) tf 50K 12V .2F .3F Fig 21b. Switching Time Waveforms + D.U.T. VDS -4.5V QGS QG QGD VGS -3mA VG IG ID Charge Current Sampling Resistors Fig 22a. Gate Charge Test Circuit Fig 22b. Basic Gate Charge Waveform www.irf.com - VDD 6 N & P-Channel 100 IRF7307QPBF Thermal Response (Z thJA ) D = 0.50 0.20 10 0.10 0.05 0.02 1 0.01 SINGLE PULSE (THERMAL RESPONSE) PDM t1 t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJA + TA 0.001 0.01 0.1 1 10 100 0.1 0.0001 t1, Rectangular Pulse Duration (sec) Fig 23. Maximum Effective Transient Thermal Impedance, Junction-to-Ambient www.irf.com 7 IRF7307QPBF Peak Diode Recovery dv/dt Test Circuit D.U.T + + Circuit Layout Considerations * Low Stray Inductance * Ground Plane * Low Leakage Inductance Current Transformer - + RG VGS* ** * dv/dt controlled by RG * ISD controlled by Duty Factor "D" * D.U.T. - Device Under Test + - VDD * * Reverse Polarity for P-Channel ** Use P-Channel Driver for P-Channel Measurements Driver Gate Drive P.W. Period D= P.W. Period [VGS=10V ] *** D.U.T. ISD Waveform Reverse Recovery Current Body Diode Forward Current di/dt D.U.T. VDS Waveform Diode Recovery dv/dt [VDD] Re-Applied Voltage Inductor Curent Body Diode Forward Drop Ripple 5% [ISD ] *** VGS = 5.0V for Logic Level and 3V Drive Devices Fig 24. For N and P Channel HEXFETS www.irf.com 8 IRF7307QPBF SO-8 Package Outline Dimensions are shown in millimeters (inches) 9 6 ' & ! % " $ 7 9DH 6 6 i DI8C@T HDI H6Y $"! %'' # " &$ '( (' ! (' (%' HDGGDH@U@ST HDI H6Y "$ &$ "" ( #' !$ $ !$ $ % @ $ # C !$Ab dA 6 p 9 @ r r C #(& $&# $AA76TD8 !$AA76TD8 !!'# !## (( % A (% $ A' "' # !&AA76TD8 %"$AA76TD8 $' %! !$ # A $ !& A' %Y r F G r 6 FAA#$ 8 Ab#dA 'YAG & 'YAp 'YAi !$Ab dA 6 867 IPU@T) AA9DH@ITDPIDIBAEAUPG@S6I8DIBAQ@SA6TH@A #$H ((# !AA8PIUSPGGDIBA9DH@ITDPI)AHDGGDH@U@S "AA9DH@ITDPITA6S@ATCPXIADIAHDGGDH@U@STAbDI8C@Td #AAPVUGDI@A8PIAPSHTAUPAE@9@8APVUGDI@AHT !66 $AAA9DH@ITDPIA9P@TAIPUADI8GV9@AHPG9AQSPUSVTDPIT AAAAAHPG9AQSPUSVTDPITAIPUAUPA@Y8@@9A $Ab%d %AAA9DH@ITDPIA9P@TAIPUADI8GV9@AHPG9AQSPUSVTDPIT AAAAAHPG9AQSPUSVTDPITAIPUAUPA@Y8@@9A!$Ab d &AAA9DH@ITDPIADTAUC@AG@IBUCAPAAG@69AAPSATPG9@SDIBAUP AAAAA6ATV7TUS6U@ APPUQSDIU 'YA&!Ab!'d %#%Ab!$$d "YA !&Ab$d 'YA &'Ab&d SO-8 Part Marking @Y6HQG@)AUCDTADTA6IADSA& AHPTA@U DIU@SI6UDPI6G S@8UDAD@S GPBP ;;;; ) 96U@A8P9@AXX QA2A9@TDBI6U@TAG@69AS@@ QSP9V8UAPQUDPI6G A2AG6TUA9DBDUAPAAUC@A@6S XXA2AX@@F 6A2A6TT@H7GATDU@A8P9@ GPUA8P9@ Q6SUAIVH7@S 9 Note: For the most current drawing please refer to IR website at http://www.irf.com/package/ www.irf.com IRF7307QPBF SO-8 Tape and Reel Dimensions are shown in millimeters (inches) TERMINAL NUMBER 1 12.3 ( .484 ) 11.7 ( .461 ) 8.1 ( .318 ) 7.9 ( .312 ) FEED DIRECTION NOTES: 1. CONTROLLING DIMENSION : MILLIMETER. 2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS(INCHES). 3. OUTLINE CONFORMS TO EIA-481 & EIA-541. 330.00 (12.992) MAX. 14.40 ( .566 ) 12.40 ( .488 ) NOTES : 1. CONTROLLING DIMENSION : MILLIMETER. 2. OUTLINE CONFORMS TO EIA-481 & EIA-541. Note: For the most current drawing please refer to IR website at http://www.irf.com/package/ Data and specifications subject to change without notice. This product has been designed and qualified for the Automotive [Q101] market. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.07/2007 www.irf.com 10 |
Price & Availability of IRF7307QPBF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |