View LA7209V_4173170.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : ENA0641
Monolithic Linear IC
LA7209V
Overview
ISO/IEC-14443 (proximity) RF amplifier for contact-less IC card and tag
The LA7209V is a ISO/IEC-14443 (proximity) RF amplifier for contact-less IC card and tag.
Features
* Driver amplifier for ASK modulation (under 500mW) : Modulation and output level be able to changing by out side constant. * Diode detector (bridge connecting) : Abstract the data by envelope detector. * Band pass filter (10kHz to 1MHz) : Data frequency bandwidth pass filter. * Variable gain amplifier + fixed gain amplifier : Choosing the wide range output level by additional fixed gain amplifier. * Comparator (10mVp-p to 2Vp-p) : Converting to the pulse signal of 0/5 volts from small signal. * Regulator (2V) : Can be use the VCC = 2.7V to 6.0V (recommend VCC : 3V 10% or 5V 10%) * Type changeover switch (card type A/B, C) : All smart card and RF-tag can be read and write by TYPE_CTL. * Power save (mute) changeover switch : Power save (= 650A) and output mute can be setting by PWR_CTL.
Specifications
Maximum Ratings at Ta = 25C
Parameter Maximum supply voltage Allowable power dissipation Operating temperature Storage temperature Symbol VCC max Pd max Topr Tstg Ta 75C * Conditions Ratings 9.0 600 -20 to +75 -40 to +125 Unit V mW C C
When mounted on a 114.3mmx76.1mmx1.6mm, glass epoxy board.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment.
30707 MS PC B8-7269 No.A0641-1/14
LA7209V
Recommended Operating Conditions at Ta = 25C
Parameter Recommended operating voltage Allowable operating voltage range Symbol VCC VCC op Conditions Ratings 5.0 2.7 to 6.0 Unit V V
Electrical Characteristics at Ta = 25C, VCC = 5V
Parameter Consumption current 1 Symbol ICC1 IN T2A T3A OUT Conditions min VIN = 3.0Vp-p, 13.5MHz, Square wave (T2A/T3A : Opposite) Measure the flowing current at pin 20. T7 : 3.0V, SW1 : 2, SW2 : Open, SW3 : 2, SW4 : 2, SW5 : 2, SW6 : 2 Consumption current 2 ICC2 T2A T3A VIN = 3.0Vp-p, 13.5MHz, Square wave (T2A/T3A : Opposite) Measure the flowing current at pin 22 & 23. T7 : 3.0V, SW1 : 2, SW2 : Open, SW3 : 2, SW4 : 2, SW5 : 2, SW6 : 2 Consumption current 1 in power save ICC1S T2A T3A VIN = 3.0Vp-p, 13.5MHz, Square wave (T2A/T3A : Opposite) Measure the flowing current at pin 20 in P.S. T7 : 3.0V, SW1 : 2, SW2 : Open, SW3 : 2, SW4 : 2, SW5 : 2, SW6 : 2 Consumption current 2 in power save ICC2S T2A T3A VIN = 3.0Vp-p, 13.5MHz, Square wave (T2A/T3A : Opposite) Measure the flowing current at pin 22 & 23 in P.S. T7 : 3.0V, SW1 : 2, SW2 : Open, SW3 : 2, SW4 : 2, SW5 : 2, SW6 : 2 MOD output level 1 VMOD1 T2A T3A T22 T23 VIN = 3.0Vp-p, 13.5MHz, Square wave (T2A/T3A : Opposite) Measure the amplitude of output waveform. T7 : 3.0V, SW1 : 2, SW2 : 2, SW3 : 2, SW4 : 2, SW5 : 2, SW6 : 2 MOD output level 2 VMOD2 T2A T3A T22 T23 VIN = 750mVp-p, 13.5MHz, Square wave (T2A/T3A : Opposite) Measure the amplitude of output waveform. T7 : 3.0V, SW1 : 2, SW2 : 2, SW3 : 2, SW4 : 2, SW5 : 2, SW6 : 2 MOD output level 3 VMOD3 T2A T3A T22 T23 VIN = 750mVp-p, 13.2MHz, Square wave (T2A/T3A : Opposite) The ratio of VMOD2. T7 : 3.0V, SW1 : 2, SW2 : 2, SW3 : 2, SW4 : 2, SW5 : 2, SW6 : 2 MOD output level 4 VMOD4 T2A T3A T22 T23 VIN = 750mVp-p, 13.8MHz, Square wave (T2A/T3A : Opposite) The ratio of VMOD2. T7 : 3.0V, SW1 : 2, SW2 : 2, SW3 : 2, SW4 : 2, SW5 : 2, SW6 : 2 MOD 2nd harmonic distortion THD2 T2A T3A T22 T23 VIN = 750mVp-p, 13.5MHz, Square wave (T2A/T3A : Opposite) Measure 2nd harmonic distortion of output waveform. T7 : 3.0V, SW1 : 2, SW2 : 2, SW3 : 2, SW4 : 2, SW5 : 2, SW6 : 2 Modulation type A MODA T2A T3A T7 Modulation type B MODB T2A T3A T7 Modulator output noise level MOD DATA input voltage "High" MOD DATA input voltage "Low" VDATL T7 T6 VDATH T7 NMOD T7 T22 T23 T6 T22 T23 T22 T23 VIN = 3.0Vp-p, 106kHz, Square wave (T7) VIN = 750mVp-p, 13.5MHz, Square wave (T2A/T3A : Opposite) Measure modulation of output waveform. SW1 : 2, SW2 : 2, SW3 : 2, SW4 : 2, SW5 : 2, SW6 : 2 VIN = 3.0Vp-p, 106kHz, Square wave (T7) VIN = 750mVp-p, 13.5MHz, Square wave (T2A/T3A : Opposite) Measure modulation of output waveform. SW1 : 2, SW2 : 2, SW3 : 2, SW4 : 2, SW5 : 2, SW6 : 2 DC_3V are impressed to T7 and an output noise is measured. SW1 : 2, SW2 : 2, SW3 : 2, SW4 : 2, SW5 : 2, SW6 : 2 DC voltage that T6 sinks. SW1 : 2, SW2 : 2, SW3 : 3, SW4 : 2, SW5 : 2, SW6 : 2 DC voltage that T6 opens. SW1 : 2, SW2 : 2, SW3 : 3, SW4 : 2, SW5 : 2, SW6 : 2 Continued on next page. 0.0 1.3 V 1.7 5.0 V -43 -39 dBV 25 30 35 % 90 100 110 % -60 -40 -34 dB 70 85 100 % 70 85 100 % 1.2 2.5 3.8 Vp-p 9 12 15 Vp-p 0 0.1 0.2 mA 0.5 0.65 0.8 mA 7 9.5 12 mA 15 Ratings typ 20 max 25 mA Unit
No.A0641-2/14
LA7209V
Continued from preceding page. Parameter DET demodulation sensitivity type A DET demodulation sensitivity type C DET demodulation sensitivity 423k Comparator sensitivity SCMP DT423 DETC Symbol DETA IN T22 T23 T22 T23 T22 T23 T16A T15 T18 T18 OUT T18 Conditions min VIN = 5.0Vp-p (13.5MHz)+28mVp-p (847kHz) Measure the C/N ratio of the 847kHz component. SW1 : 1, SW2 : 2, SW3 : 2, SW4 : 1, SW5 : 1, SW6 : 2 VIN = 5.0Vp-p (13.5MHz)+28mVp-p (106kHz) Measure the C/N ratio of the 106kHz component. SW1 : 2, SW2 : 2, SW3 : 2, SW4 : 1, SW5 : 1, SW6 : 2 VIN = 5.0Vp-p (13.5MHz)+28mVp-p (423kHz) Measure the C/N ratio of the 423kHz component. SW1 : 2, SW2 : 2, SW3 : 2, SW4 : 1, SW5 : 1, SW6 : 2 VIN = 10mVp-p, 106kHz, Square wave Measure the amplitude of output waveform. SW1 : 2, SW2 : 2, SW3 : 2, SW4 : 1, SW5 : 2, SW6 : 2 Comparator output "Low" VCMPL T2A T3A T7 T15 VIN = 3.0Vp-p, 106kHz, Square wave (T7) VIN = 3.0Vp-p, 13.5MHz, Square wave (T2A/T3A : Opposite) Measure the bottom of DC of output waveform. SW1 : 2, SW2 : 2, SW3 : 2, SW4 : 1, SW5 : 2, SW6 : 2 EVR characteristics 1 GEVR1 T22 T23 T18 VIN = 5.0Vp-p (13.5MHz)+28mVp-p (847kHz) Measure the output level at Pin 18, Calculate output/input ratio. SW1 : 2, SW2 : 2, SW3 : 2, SW4 : 1, SW5 : 1, SW6 : 2 EVR characteristics 2 GEVR2 T22 T23 T18 VIN = 5.0Vp-p (13.5MHz)+28mVp-p (847kHz) Measure the output level at Pin 18, Calculate GEVR1 minus output level. SW1 : 2, SW2 : 2, SW3 : 2, SW4 : 1, SW5 : 2, SW6 : 2 TAG DET output VTAG T22 T23 TAG DET output "Low" VTAGL T22 T23 Type Switch ON voltage TYPON T11 T4 T10 T10 VIN = 5.0Vp-p (13.5MHz)+28mVp-p (847kHz) Measure the output level at Pin 18. SW1 : 2, SW2 : 2, SW3 : 2, SW4 : 1, SW5 : 1, SW6 : 2 VIN = 5.0Vp-p (13.5MHz)+28mVp-p (847kHz) Measure the DC bottom level of output wave at Pin 18. SW1 : 2, SW2 : 2, SW3 : 2, SW4 : 1, SW5 : 1, SW6 : 2 DC voltage that T4 sinks. SW1 : Open, SW2 : 2, SW3 : 3, SW4 : 2, SW5 : 2, SW6 : 2 Type Switch OFF voltage Power save ON voltage PSON T12 T20 TYPOF T11 T4 DC voltage that T4 opens. SW1 : Open, SW2 : 2, SW3 : 3, SW4 : 2, SW5 : 2, SW6 : 2 DC voltage that DC current 1mA or less flows into T20. SW1 : 2, SW2 : Open, SW3 : 3, SW4 : 2, SW5 : 2, SW6 : 2 Power save OFF voltage PSOFF T12 T20 DC voltage that DC current 10mA or more flows into T20. SW1 : 2, SW2 : Open, SW3 : 3, SW4 : 2, SW5 : 2, SW6 : 2 0.0 1.3 V 1.7 5.0 V 1.7 5.0 V 0.0 1.3 V 0 0.2 0.4 V 2.5 3.0 3.1 Vp-p 14 16 18 dB 24 30 dB 0 0.2 0.4 V 2.5 3.0 3.1 Vp-p 45 48 51 dB 47 50 53 dB 42 Ratings typ 45 max 48 dB Unit
No.A0641-3/14
LA7209V
Package Dimensions
unit : mm (typ) 3175C
7.8 24 13
5.6
7.6
1 0.65 (0.33) 0.22
12 0.15
SANYO : SSOP24(275mil)
Block Diagram
T24 T23
VCC2 5V 1H 1H Dummy Antenna 15pF
0.1
(1.3)
1.5max
0.5
T22 T21 T20
VCC1 5V
T16A T19 SW5
100k
T18 2
10k
T17
T16
VCC3 VCC3 3V T15 3V T15 1.8k 100
10H 10pF
1
1 SW4 2 0.1F 17 AMP OUT
+ 10F 0.1F
24
DET IN-
3.9k 23 22 21 MOD MOD DET OUTOUT+ IN+
20 VCC
19 EVR CTL GAIN 10~30dB
18 EVR OUT
16 15 14 COMP TAG COMP IN OUT REF
13 GND
AMP GAIN 30dB
COMP
LPF
EVR
MOD ON:TYPE-B/C REG CAR IN+ 2 2.7k
240
TAG DET
COMP TAG DET 9 PWR TAG TYPE SAVE CTL OUT CTL 10 11 12 VCC1 VCC3 VCC1 5V 3V 5V 10k 1 SW1 B/C 2 T11 T12 A 1 PWR_SAVE SW2 2 NOR_OPRT
GND 1
CAR IN3
DATA MOD_E SW 4 5 6 SW6 2 10 33 2 1
240 10k
TYPE SW
MOD DATA IN 7
REG 8
100pF
1F 10k SW3 T7 T8 VCC3 3V
T2 T3 T2A T3A
T4 VCC3 3V
T5 T6
* Dummy antenna : TDK inductor EL0405 Specifications : L = 1H 1%, Q = 50 (at f = 7.96MHz), DC resistance = 0.22 (maximum)
+
100pF
T9
T10
No.A0641-4/14
LA7209V
Pin Functions
Pin No. 1 2 Pin Name GND CAR_IN+ 0V SQUARE-WAVE : 13.5MHz DC voltage Signal wave form Equivalent Circuit
Pin 2
600A
0.1Vp-p
300
3
CAR_IN-
0V
SQUARE-WAVE : 13.5MHz
Pin 3
600A
0.1Vp-p
300
4
TYPE_SW
0V
DC
Pin 4
500 50k
5
MOD_E
1V
DC
Pin 22
Pin 23
Pin 5
6 DATA_SW 0V DC
Pin 6
500 50k
Continued on next page.
No.A0641-5/14
LA7209V
Continued from preceding page. Pin No. 7 Pin Name MOD_DATA_IN DC voltage 0V Signal wave form SQUARE-WAVE Equivalent Circuit
1.8V~VCC
120A 50k 50k
GND
8 REG 2V DC
Pin 7
1k 10pF 330 2k 10.7k 10.7k 12k 620
9 TAG_DET
1k
7k
Pin 8
13k
10k
Pin 9
300 5k 50k
10 TAG_OUT 5V DC
Pin 10
25A
11
TYPE_CTL
0V to 1.2V : TYPE_B/C 1.8V to VCC : TYPE_A
Pin 11 90A
300 50k 1.0V
12
PWR_SAVE_ CTL
0V to 1.2V : Normal 1.8V to VCC : Power_Save
Pin 12 130A
300
1.0V
13
GND Continued on next page.
100k
No.A0641-6/14
LA7209V
Continued from preceding page. Pin No. 14 Pin Name TAG_REF DC voltage 0.5V DC Signal wave form Equivalent Circuit
Pin 14 50A VREG
300 30k 10k
15
COMP_OUT
1.6V
SQUARE-WAVE
Pin 15
VCC
100A
GND
16
COMP_IN
1.2V
SQUARE-WAVE
Pin 16
1.6V
50A 500 10k 500 10k
0.8V
2.0V
250A
17
AMP_OUT
4V
SQUARE-WAVE
Pin 17 4.4V 160A
500 3.6V 50A
18
EVR_OUT
4V
SQUARE-WAVE
Pin 18 4.4V 5k
300 3.6V 50A
Continued on next page.
No.A0641-7/14
LA7209V
Continued from preceding page. Pin No. 19 Pin Name EVR_CTL DC voltage 1.4V DC Signal wave form Equivalent Circuit
200
200
250
200 200 1.4V 1k 50A 1pF Pin 19
20 21 24 VCC DET_IN+ DET_IN5V 2V DC ASK-WAVE : 13.5MHz
Pin 21
10k
Pin 24
50A 3k 3k
4Vp-p
4.7k 20pF 20pF 3k 3k
4.7k
20pF 20pF 1.3V
50A
22 23
MOD_OUT+ MOD_OUT-
5V
ASK-WAVE : 13.5MHz
Pin 22
Pin 23
8Vp-p
Pin 5
No.A0641-8/14
LA7209V
ASK Modulation Driver Amplifier Signal Flow
ASK modulation output (+) VCC VCC VCC
ASK modulation output (-)
Instruction data H 22 Rd 22 Carrier (-):13.56MHz 3 Carrier (+):13.56MHz 2 L Pin 5 voltage
SW4
SW6
11
4
5
6
7
High : Always on Low : Linked to pin 7
Ra
Rb
Data high : On Data low : Off
Read Amplifier Signal Flow
100k : Maximum gain 19 fc=30kHz 4.7k 2nd LPF fc=2.5MHz 21 Antenna 24 fc=2.5MHz 2nd LPF HPF fc=30kHz 3.3V 4.0V 10~30dB 4.0V
Adjustable amplifier Fixed amplifier
4.7k : Minimum gain 18 30dB
HPF
17
4.7k 2V
No.A0641-9/14
LA7209V
Description of Functional Settings 1. ASK modulation driver amplifier: ASK modulates the data and outputs it as an RD signal. (1) Input settings Pins 2 and 3 input a 13.56MHz carrier signal (pulse/sine wave) as an inverting/noninverting input pair. The input dynamic range is 500mVp-p. I/O Characteristics Sample Data
Input level [mVp-p] 280 220 180 280 220 180 280 220 180 Output level [Vp-p] Data : high/low 7.9/3.9 6.3/3.3 4.6/2.5 7.1/3.3 5.6/2.9 4.1/2.3 6.2/2.9 4.8/2.5 3.5/1.5 15 15 15 22 22 22 33 33 33 4.7 4.7 4.7 6.8 6.8 6.8 10 10 10 1 1 1 1 1 1 1 1 1 Ra [] Rb [] Rd [k] Antenna current [mA] Data : high/low 13.5/6.0 10.5/4.8 7.8/3.7 11.9/4.9 9.3/4.0 7.0/3.1 10.0/3.9 8.0/3.2 6.0/2.5 IC current [mA] Data : high/low 20.9/19.4 20.7/19.2 20.5/19.0 20.9/19.4 20.7/19.2 20.5/19.0 20.9/19.4 20.7/19.2 20.5/19.0
(2) Setting the degree of modulation The degree of modulating is set by the ratio of the resistors connected between pins 4 and 5 (Ra) and pins 5 and 6 (Rb). For types B and C, this is determined by the idling current (Ia) determined by Ra and parallel resistance of Ra + Rb. The degree of modulation is determined by the idling current (Iab). (Modulation is performed by switching pin 6 (DATA_SW) on and off.) For type A, the 100% modulation point is determined by the idling current (Iab) determined by the parallel resistance of Ra + Rb. (Modulation is performed by switching pin 4 (TYPE_SW) and pin 6 on and off at the same time.) Setting the Degree of Modulation
Pin 11 High (Type A) Pin 4 *1 Low (type B and C) On Pin 6 Data high On Pin 7 Data low Off
*1 : When type A is selected by setting pin 11 high, SW4 and SW6 operate in a linked manner.
MOD SW4 SW6 CAR IN+ 2 3 CAR IN4 Ia Ra TYPE SW 5 Ib Rb DATA SW 6 7 MOD DATA IN TYPE CTL 11
MOD_E
No.A0641-10/14
LA7209V
Degree of Modulation Sample Data
Input level [mVp-p] 220 220 Output level [Vp-p] Data : high/low 4.8/3.9 4.8/0.0 10 10 33 33 1 1 Ra [] Rb [] Rd [k] Antenna current [mA] Data : high/low 8.0/6.0 8.0/0.1 IC current [mA] Data : high/low 20.7/19.2 20.7/19.2 10 100 Degree of modulatio [%]
* : This IC can support out-of-standard modulation levels by settings using the resistors Ra and Rb described above.
(3) Output level setting The output level is set by setting the two items (the input level and the idling current) described above and the damping resistor (Rd) between pins 22 and 23. Note that although an output amplitude (at pins 22 and 23) of about two times the VCC voltage can be acquired, if the output voltage limit is exceeded, a collision with the pin 5 voltage occurs and abnormal oscillation due to VCE saturation may occur. In such cases, changes to the antenna structure (VCC midpoint supply) and/or damping of the output level will be required. Output Damping Characteristics Sample Data
Rd [] 3.9 2.2 1 3.9 2.2 1 3.9 2.2 1 Output level [Vp-p] Data : high/low 8.5/4.6 6.9/3.5 4.6/2.5 8.1/4.3 6.5/3.3 4.1/2.3 7.5/3.5 5.8/2.9 3.5/1.9 15 15 15 22 22 22 33 33 33 4.7 4.7 4.7 6.8 6.8 6.8 10 10 10 180 180 180 180 180 180 180 180 180 Ra [] Rb [] Input level [mVp-p] Antenna current [mA] Data : high/low 7.8/3.7 7.8/3.7 7.8/3.7 7.0/3.1 7.0/3.1 7.0/3.1 6.0/2.5 6.0/2.5 6.0/2.5 IC current [mA] Data : high/low 20.5/19.0 20.5/19.0 20.5/19.0 20.5/19.0 20.5/19.0 20.5/19.0 20.5/19.0 20.5/19.0 20.5/19.0
2. Read amplifier (diode detector, bandpass filter, variable amplifier + fixed amplifier) : Data modulation from the RF signal (1) Level setting The input level is determined by voltage division by the capacitors connected between pins 21 and 22 and between pins 23 and 24 and the IC internal capacitance. However, note that the input dynamic range of pins 21 and 24 is the same as the VCC voltage. (2) Variable amplifier gain setting The gain is determined by the value of the resistor (Rg) connected between pin 19 and ground. Note that the range of values that may be used for Rg is from 4.7k (minimum gain) to 100k (maximum gain).
0
Bandpass Filter Characteristics
30
Variable Amplifier Gain Characteristics
-5
25
Response [dB]
- 10
20
- 15
Gain [dB]
100 1000 10000
15
- 20
10
- 25
5
- 30 10
0 0 10 20 30 40 50 60 70 80 90 100
Frequency [kHz]
Pin 19 resistance (=Rg) [k]
No.A0641-11/14
LA7209V
3. Comparator: Used to provide 0V/5V pulse output of the demodulated data. (1) Setting the input level Signals from 10mVp-p to 2Vpp can be handled by using capacitor coupling to input the signal to pin 16. (2) Setting the output load resistance The load resistance is set so that the pin 15 current capacity is 2.2mA to 5mA. Note that this will be the range 2.2 k to 1 k when VCC = 5 V. 4. Variable threshold TAG detector: Detects tags in the communications area (1) Setting the input level The input level is determined by the resistor (Rg) connected between pin 19 and ground. Note however, that since the output level can also be modified at the same time by pins 17 and 18, the adjustment described in step (2) of the following item is required. (2) Setting the detection threshold level The built-in detector's threshold level can be changed by pin 14, and is set so that it can identify whether or not a TAG is present. * : The level goes to 500mV if the pin is left open. (3) Setting the detection (smoothing) capacitor The built-in detector's sensitivity is adjusted with pin 9. (Minimum capacitance : 10pF) (4) Setting the output load resistance Set the load resistance so that the pin 10 pull-in current is in the range 0.2mA to 0.5mA. Note that this will be the range 10k to 24k when VCC = 5 V. 5. Type switching: For IC card type switching * Low (0V to 1V) : Type B/C read/write communication is possible * High (2V to VCC) : Type A read/write communication is possible 6. Power save mode (muting) switching: Used for low-power mode control and driver amplifier output muting * Low (0V to 1V) : Normal operation Read/write communication is possible * High (2V to VCC) : Power saving mode Read/write communication is not possible
No.A0641-12/14
LA7209V
Application Circuit Example
Antenna : 4Turn VCC1 5V 10H VCC1 5V 10H 10F 47pF 1.0k 47pF + VCC1 5V 100H 10pF 68k DATA OUT (to P13) VCC1 3V 2.2k VCC1 3V 6.8k 3.3k 16 15 14 COMP TAG COMP OUT REF IN 13 GND
39pF
24
DET IN-
23 MOD OUT-
22 21 MOD DET OUT+ IN+
20 VCC
19 EVR CTL GAIN 10~30dB
18 EVR OUT
17 AMP OUT
AMP GAIN 30dB
COMP
LPF
EVR
MOD ON:TYPE-B/C REG CAR IN+ 2 2.7k 100 100 100 1F 0.01F + 15 4.7 100pF CAR IN3 TYPE SW 4 DATA SW 6 MOD DATA IN 7 TAG DET 9
TAG DET
COMP TAG TYPE OUT CTL 10 11 VCC1 5V 10k PWR SAVE CTL 12
GND 1
MOD_E 5
REG 8
OSC
Data Command (to TP30)
TAG OUT (to P3)
Reset CLT
No.A0641-13/14
LA7209V
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above.
This catalog provides information as of March, 2007. Specifications and information herein are subject to change without notice. PS No.A0641-14/14

▲Up To Search▲

Price & Availability of LA7209V

	To Download LA7209V Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .