View TLP716F_4150742.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TLP716F
TOSHIBA Photocoupler GaAAs IRED & Photo-IC
TLP716F
Plasma display panel High Speed Interface Factory Automation
Unit in mm
4.580.25
654
The TOSHIBA TLP716F consists of a GaAAs light emitting diode and a high speed photodetector. This unit is 6-lead SDIP. TLP716F is 50% smaller than 8PIN DIP and has suited the safety standard reinforced insulation class. So, mounting area in safety standard required equipment can be reduced. Absolute maximum ratings and electrical characteristics are the same as the TLP716 technical data sheets. Inverter Logic (totempole output) Package Type : SDIP6 Guaranteed Performance Over Temperature : -40~100C Power Supply Voltage : 4.5~5.5 V Input Thresholds Current : IFHL=6.5 mA(max.) Propagation delay Time (tpHL/ tpLH) : 75 ns(max.) Switching speed : 15 MBd(typ.) (NRZ) Common mode transient immunity : 10 kV/us(min.) Isolation voltage : 5000 Vrms(min.) UL Recognized :UL1577, File No.E67349 Option (D4) TUV Approved : EN60747-5-2 Maximum Operating Insulation Voltage : 1140 VPK Highest Permissible Over Voltage : 8000 VPK (Note): When an EN60747-5-2 approved type is needed, Please designate "Option(D4)" Construction Mechanical Rating
Creepage Distance Clearance Insulation Thickness 8.0 mm (min) 8.0 mm (min) 0.4 mm (min)
+0.15 3.65 -0.25
6.80.25
1.270.2 0.40.1
0.25 +0.10
-0.05
123
7.620.25
0.750.25 11.70.3
11-5J101
TOSHIBA
11-5J101
Weight0.26 g (t yp .)
Pin Configuration (Top View) 1 2 3
GND SHIELD VCC
6 5 4
1:ANODE 2:N.C. 3:CATHODE 4:GND 5:Vo 6:Vcc
Schematic
ICC
Truth Table
Input H L LED ON OFF Tr1 OFF ON Tr2 ON OFF Output L H
IF
6
Tr1 IO Tr2
VCC
1
VF
3
5
VO
SHIELD
0.1 F bypass capacitor must be connected between pins 6 and 4.
4
GND
1
2007-10-01
3.9 -0.15
+0.25
TLP716F
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
2
2007-10-01

▲Up To Search▲

Price & Availability of TLP716F

	To Download TLP716F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .