View FTP-627CU201_4152244.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

24 V DRIVE, FTP-607 SERIES HIGH SPEED THERMAL PRINTER 3-INCH TYPE MECHANISM
FTP-637MCL103
s OVERVIEW
The FTP-607MCL Series thermal printer (driven by 24VDC) provides ultra-high speed printing (80mm/s) for 2-inch and 3inch wide paper. Our original platen removal mechanism allows easy paper loading and maintenance. The FTP-607 MCL series can be used for a variety of applications, such as POS/ECR, Kiosk terminals, ticket issuing terminals, label printers, banking terminals, and measurement and medical equipment.
s HIGHLIGHTS
* Compact size Height 15.5 mm, width 70.4 mm, depth 33.0 mm for the 2 inch model. The 3-inch product has a width of 92.4mm. * High speed printing It can print at 100 mm/s (800 dotlines/s) maximum by using Fujitsu's unique head drive control. Easy loading mechanism (ELM) type Our unique platen removal mechanism improved paper loading and maintenance. Multi-featuring diecast fame By application of multi-featuring diecast frame, continous print by function of heat-sink, high ESD stand by function of earth frame and shock/vibration stand by function of solid frame are valid. * High resolution printing 8 dots/mm of resolution printing is possible.
*
*
1
FTP-637MCL103
s PART NUMBERS
Name Printer Mechanism 3 inch LSI parallel Interface Board serial Parallel (Centronics) Interface Cable Serial (RS-232C) Logic Power Cable Head motor FTP-629Y601 FTP-628Y302 FTP-629Y401 FTP-637DSL238 FTP-628Y202 Part Number FTP-637MCL103 FTP-627CU201 FTP-637DCL218
s SPECIFICATIONS
Item Part number Printing method Dot structure Dot pitch (Horizontal) Dot pitch (Vertical) Effective printing area Number of columns Paper width Paper thickness Printing Speed FTP-637MCL103 Thermal-sensitive line dot method 576 dots/line 0.125 mm (8 dots/mm)--Dot density 0.125 mm (8 dots/mm)--Line feed pitch 72 mm ANK 48 columns/line (max.12x 24 dot font) 80 mm+0 -1 60 to 100 m (some paper in this range may not be used because of paper characteristics) Maximum 100mm/sec. (800 dot line/sec.) Alphanumeric, katakana: International and special characters: JIS Kanji (supported when Kanji CG is mounted): (1.5 x 3.0mm) (3.0 x 3.0mm) (1.0 x 2.0 mm) (2.0 x 2.0 mm) 48 columns: ANK 28 columns: ANK, Kanji 72 columns: ANK 36 columns: ANK, Kanji 159 types 195 types about 6800 types Specifications
Character types
Character, dimensions (HxW), number of columns
2
FTP-637MCL103
s SPECIFICATIONS
Specification Item FTP-637MCL103 Interface For print head Operating Voltage For motor For logic External dimensions Weight Life Head Operating temperature Operating environment Operating humidity Storage temperature Storage humidity Head temperature detection Printer mechanism Interface board Conforms to RS232C / Centronics 24 VDC 5%, 1.5 A average, 2.2 A peak (print ratio: 25%) 24 VDC 5%, 1 A maximum 5 VDC 5%, 0.5 A maximum 92.4 x 33.0 x 15.5 mm (WxDxH) 70 x 60 x 24 mm (WxDxH) Approximately 52g Pulse resistance: 5x 108 pulses/dot (under our standard conditions). Abrasion resistance: paper traveling distance 50km (print ratio: 25% or less) 0 C to +50 C*1 20 to 85% RH (no condensation) -20 C to +60 C (paper not included) 5 to 95% RH (no condensation) Detected by thermistor
Detection function
Paper out/mark detection Detected by photo-interrupter Platen release detection Detected by slide switch FTP-030PU001(80mm)
Recommended thermal sensitive paper
*1: printing density assurance range, operation is possible at -0C to +40C
3
FTP-637MCL103
s DIMENSIONS
1. Printer mechanism FTP-637MCL103
center of paper
87.8 80.0 35(paper end sensor)
10.7
(14.1)
33 18.9
F.T
JAPAN
FUJITSU
15.5 44.7
4.6
86.7
87.60.1
Unit: mm 2 Interface board
41.0
4-
3.3
CN8
2
60.0 53.5
1 4
CN5
1
21.8
CN1 CN6
6 3 1 8
CN2
1
1
3.3
G )
(F
17.5 35.5 51.0 63.5 70.0 3.3
6.
5
3.3
16.0
CN7
2
1
42.0
30
29
3.2
30
CN3
1
Unit: mm
4
FTP-637MCL103
s CONNECTOR PIN ASSIGNMENT OF MECHANISM (FPC)
1. Thermal Head
Part number : 52610-3090 Molex or equivalent
FTP-637MCL103 PIN ASSIGNMENT
No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Signal PHK VSEN PHE SW SW VH VH VH DI STB3 STB4 VDD GND GND GND GND GND GND TM STB1 STB2 LAT CLK VH VH VH MT/A MT/A MT/B MT/B I I I I I I Stepping motor excitation signal I I
5
I/O -- I O -- -- I I I I I I I -- -- --
Contents Photointerruptor (Cathode) Ground power supply for paper sensor Photointerruptor (Emittor) Platen open switch Platen open switch
Power supply for thermal head
Print data in Print enable 3 Print enable 4 Power for logic
Ground power supply for thermal head -- -- -- O I I Thermistor Print enable 1 Print enable 2 Print data latch Clock
Power supply for thermal head
FTP-637MCL103
Fujitsu Components International Headquarter Offices
Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com
Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com
(c) 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 11/15/2004.
6

▲Up To Search▲

Price & Availability of FTP-627CU201

	To Download FTP-627CU201 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .