 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Power SIP Relay CPC1973Y Blocking Voltage Load Current On-Resistance CPC1973Y 400 0.35 5 Units VP Arms Description * * * * * * * * * Features Power SIP Package Handle Load Currents Up to 0.5A High Reliability No Moving Parts Low Drive Power Requirements (TTL/CMOS Compatible) Arc-Free With No Snubbing Circuits 2500Vrms Input/Output Isolation No EMI/RFI Generation Machine Insertable, Wave Solderable Clare and IXYS have combined to bring OptoMOS(R) technology, reliability and compact size to a new family of high power solid state relays. As part of that family, the CPC1973Y is a 1-Form-A solid state relay. The CPC1973Y employs optically coupled MOSFET technology to provide 2500Vrms of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS architecture while the input is controlled by a highly efficient GaAlAs infrared LED. The combination of low on resistance and high load current handling capabilities makes the relay suitable for a variety of high performance switching applications. Approvals * UL recognized component: File # E69938 * Certified to: UL 508 Industrial Controls Motor Control Robotics Medical Equipment--Patient/Equipment Isolation Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * IC Equipment * Home Appliances * * * * * Applications Ordering Information Part # CPC1973Y Description Power SIP Package (25 per tube) Pin Configuration CPC1973Y Pinout Switching Characteristics of Normally Open (Form A) Devices DS-CPC1973Y-R03 www.clare.com 1 CPC1973Y Absolute Maximum Ratings (@ 25 C) Parameter Blocking Voltage Reverse Input Voltage Input control Current Peak (10ms) Input Power Dissipation1 Isolation voltage Input to Output Operational Temperature Storage Temperature 1 Ratings 400 5 50 1 150 2500 -40 to +85 -40 to +125 Units VP V mA A mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 3.33 mw / C Electrical Characteristics Parameter Output Characteristics @ 25C Load Current, Continuous Peak Load Current On-Resistance1 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Input/Output Characteristics @ 25C Capacitance Input/Output 1 2 3 Conditions free air T=10ms IL=350mA VL=400V IF=10mA, VL=10V IF=10mA, VL=10V IL=350mA IF=5mA VR=5V Symbol IL ILPK RON ILEAK TON TOFF IF IF VF IR Min 10 0.9 - Typ 3.4 1.2 2 Max 0.35 3.5 5 1 5 3 1.4 10 - Units Arms Arms A ms ms mA mA V A pF f=1MHz CI/O Load current derates linearly from 600mA @ 25oC to 480mA @80oC. Measurement taken within 1 second of on time. For applications requiring high temperature operation (greater than 60oC) an LED drive current of 3mA is recommended. Thermal Characteristics Parameter Thermal Resistance (junction to case) Conditions Symbol RJC Min Typ 1.5 Max Units C/W 2 www.clare.com R03 CPC1973Y PERFORMANCE DATA* 45 40 Device Count (N) Device Count (N) 35 30 25 20 15 10 5 0 1.24 1.25 1.26 1.28 1.29 35 Device Count (N) 30 25 20 15 10 5 0 3.33 3.36 3.39 3.42 3.45 3.48 35 30 25 20 15 10 5 0 523 525 527 529 531 533 535 LED Forward Voltage (V) Blocking Voltage (V) CPC1973Y Typical Maximum DC Load Current vs. Temperature 25 20 15 10 5 0 25 Load Current (mA) 20 15 10 5 0 Device Count (N) Device Count (N) IF = 20mA IF = 10mA 1.5 1.75 2.0 2.25 2.5 2.75 0.008 0.010 0.012 0.014 0.016 0.018 0.020 -40 -20 0 20 40 60 80 100 120 Turn-On (ms) Turn-Off (ms) 0.014 0.012 0.010 0.008 0.006 0.004 0.002 0 CPC1973Y Typical Leakage vs. Temperature at Maximum Rated Voltage (Measured across Pins 3 & 4) Blocking Voltage (V) 570 560 540 530 520 510 500 490 550 CPC1973Y Typical Blocking Voltage vs. Temperature 1.4 1.2 Turn-On (ms) 1.0 0.8 0.6 0.4 0.2 0 CPC1973Y Typical Turn-On vs. Temperature (Load Current = 100 mADC) IF = 10mA -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 1.6 1.4 1.2 1.0 0.8 Turn-Off (ms) 0.35 0.30 0.25 0.20 0.15 0.10 -40 -20 0 20 40 60 80 100 IF = 10mA IF = 50mA IF = 20mA IF = 10mA Turn-On (ms) 0.40 LED Forward Voltage Drop (V) 0.45 CPC1973Y Typical Turn-Off vs. Temperature (Load Current = 100 mADC) 1.8 CPC1973Y Typical LED Forward Voltage Drop vs. Temperature 2.50 2.25 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0 CPC1973Y Typical Turn-On vs. LED Forward Current (Load Current = 100 mADC) -40 -20 0 20 40 60 80 100 120 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.clare.com 3 CPC1973Y PERFORMANCE DATA* CPC1973Y Typical Turn-Off vs. LED Forward Current (Load Current = 100 mADC) CPC1973Y Typical On-Resistance vs. Temperature (Load Current = 100mA) IF = 5mA Load Current (A) 0.050 0.045 0.040 Turn-Off (ms) 0.035 0.030 0.025 0.020 0.015 0.010 0.005 9 8 7 6 5 4 3 2 1 0 IF = 10mA 0 5 10 15 20 25 30 35 40 45 50 -40 -20 0 20 40 60 80 100 0.50 0.40 0.30 0.20 0.10 0 -0.10 -0.20 -0.30 -0.40 -0.50 -3.0 -2.0 -1.0 0 1.0 2.0 3.0 LED Forward Current (mA) Load Voltage (V) 4.0 Load Current (Arms) 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 CPC1973Y Energy Rating Curve (Free air, no heat sink) 1ms 10ms 100ms Time 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R03 Manufacturing Information Soldering Recommended soldering processes are limited to 245C component body temperature for 10 seconds. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS PIN 1 0.070 (1.778) PIN 4 0.070 (1.778) NOTE: Pin location tolerances are non-cumulative. Dimensions: inches (mm) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1973Y-R03 (c)Copyright 2005, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 5/26/05 |
Price & Availability of CPC1973Y
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |