View HMC353MS8_4112769.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

v00.0901
MICROWAVE CORPORATION
HMC353MS8
GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz
Features
Integrated LO Amplifier w/ Pdiss: < 20 mW Conversion Loss / Noise Figure: 8.0 dB Low LO Drive Level: 0 dBm Input IP3: >+16 dBm Single Positive Supply: 3V to 5V
Typical Applications
The HMC353MS8 is ideal for:
* BTS Infrastructure
Functional Diagram
General Description
The HMC353MS8 is a single balanced mixer IC with an integrated LO amplifier. This converter can operate as an upconverter and downconverter between 0.8 GHz and 1.2 GHz. With the integrated LO amplifier, the mixer requires an LO drive level of only 0 dBm, and requires only 6 mA from a single positive +3V rail. The mixer has 8 dB of conversion loss, an input P1dB of +7 dBm and an input third order intercept point of +16 dBm at 1 GHz.
5
MIXERS - SMT
Electrical Specifications, TA = +25 C
Parameter Min.
Frequency Range, RF & LO Frequency Range, I F Conversion Loss Noise Figure (SSB) LO to RF I s olation LO to I F I s olation RF to IF Isolation I P 3 (Input) 1 dB Compression (I n put) Supply Current (I d d) 9 4 10 10 -2
I F = 100 MHz LO= 0 dBm & Vdd= 3V Typ.
0.8 - 1.2 DC - 0.5 8 8 20 - 25 10 17 16 5 6 11 11
Units Max.
GHz GHz dB dB dB dB dB dBm dBm mA
* Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz.
5 - 278
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at sales@hittite.com
v00.0901
MICROWAVE CORPORATION
HMC353MS8
GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz
Conversion Gain vs. Temperature @ LO = 0 dBm
0
+25 C -40 C +85 C
Isolation @ LO = 0 dBm
0 -5
RF/IF LO/RF LO/IF
CONVERSION GAIN (dB)
-5
ISOLATION (dB)
-10 -15 -20 -25
-10
-15
-20 0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
-30 0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
FREQUENCY (GHz)
FREQUENCY (GHz)
5
MIXERS - SMT
Conversion Gain vs. LO Drive
0
LO = -6 dBm LO = -4 dBm LO = -2 dBm LO = 0 dBm LO = +2 dBm LO = +4 dBm
Return Loss @ LO = 0 dBm
0 -5
CONVERSION GAIN (dB)
RETURN LOSS (dB)
-5
-10 -15 -20 -25
LO RF
-10
-15
-20 0.7
-30 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 FREQUENCY (GHz) FREQUENCY (GHz)
Conversion Gain vs. Vdd @ LO = 0 dBm
0
2.7V 3.0V 3.3V
IF Bandwidth @ LO = 0 dBm
0
CONVERSION GAIN (dB)
-5
-5
RESPONSE (dB)
-10
-10
-15
-15 -20
CONVERSION GAIN RETURN LOSS
-20 0.7
-25 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 FREQUENCY (GHz) IF FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at sales@hittite.com
5 - 279
v00.0901
MICROWAVE CORPORATION
HMC353MS8
GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz
Upconverter Performance Conversion Gain @ LO = 0 dBm
0
Input P1dB vs. Temperature @ LO = 0 dBm
10 9
+25 C -40 C +85 C
CONVERSION GAIN (dB)
8 -5
INPUT P1dB (dBm)
7 6 5 4 3 2 1
-10
-15
5
MIXERS - SMT
-20 0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
1.6
0 0.8
0.9
1
1.1
1.2
1.3
FREQUENCY (GHz)
FREQUENCY (GHz)
Input IP3 vs. LO Drive*
20
Input IP3 vs. Temperature @ LO = 0 dBm*
20
15
15
INPUT IP3 (dBm)
10
INPUT IP3 (dBm)
10
5
-2 dBm 0 dBm +2 dBm
5
+25 C -40 C +85 C
0 0.8
0.9
1
1.1
1.2
1.3
0 0.8
0.9
1
1.1
1.2
1.3
FREQUENCY (GHz)
FREQUENCY (GHz)
Input IP3 vs. Vdd @ LO = 0 dBm*
20
Input P1dB vs. Vdd @ LO = 0 dBm
10 9 8
+2.7V +3.0V +3.3V
15
INPUT P1dB (dBm)
+2.7V +3.0V +3.3V
INPUT IP3 (dBm)
7 6 5 4 3 2 1
10
5
0 0.8
0.9
1
1.1
1.2
1.3
0 0.8
0.9
1
1.1
1.2
1.3
FREQUENCY (GHz)
FREQUENCY (GHz)
* Two-tone input power= -10 dBm each tone, 1 MHz spacing. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at sales@hittite.com
5 - 280
v00.0901
MICROWAVE CORPORATION
HMC353MS8
GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz
MxN Spurious @ IF Port
nLO mRF 0 1 2 3 4 0 XX 8 50 68 >71 1 -10 0 50 69 >71 2 10 23 47 70 >71 3 6 31 38 65 >71 4 17 37 58 66 >71
Harmonics of LO
nLO Spur @ RF Por t LO Freq. (GHz) 0.8 0.9 1 1.1 1.2 1.3 1 20 12 16 24 30 20 2 9 4 6 12 42 17 3 22 16 23 40 22 23 4 32 22 34 32 28 31
RF = 1.0 GHz @ -10 dBm LO = 0.9 GHz @ 0 dBm All values in dBc relative to the IF.
LO = 0 dBm All values in dBc below input LO level @ RF por t.
5
MIXERS - SMT
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at sales@hittite.com
5 - 281
v00.0901
MICROWAVE CORPORATION
HMC353MS8
GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz
Absolute Maximum Ratings
RF / IF Input (Vdd = +3V) LO Drive (Vdd = +3V) Vdd IF DC Current Storage Temperature Operating Temperature +13 dBm +13 dBm 5.5V 4 mA -65 to +150 deg C -40 to +85 deg C
5
Pin Locations & Outline Drawing
MIXERS - SMT
1. MATERIAL: A. PACKAGE BODY - LOW STRESS INJECTION-MOLDED PLASTIC, SILICA & SILICONE IMPREGNATED. B. LEADFRAME MATERIAL: COPPER ALLOY 2. PLATING: LEAD-TIN SOLDER PLATE 3. DIMENSIONS ARE IN INCHES (MILLIMETERS). UNLESS OTHERWISE SPECIFIED ALL TOL. ARE 0.005 (0.13).
4. CHARACTERS TO BE HELVETICA MEDIUM, APPROX. 030 HIGH, WHITE INK, LOCATED APPROXIMATELY AS SHOWN. 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15 mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25 mm PER SIDE.
5 - 282
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at sales@hittite.com
v00.0901
MICROWAVE CORPORATION
HMC353MS8
GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz
Pin Descriptions
Pin Number 1 Function LO Por t Description LO Por t: This pin is AC coupled and matched to 50 ohm from 0.8 - 1.2 GHz Interface Schematic
2, 4, 6, 7
GND
Ground: Pin must connect to RF ground.
5
MIXERS - SMT
5 - 283
3
Vdd
Power supply for the LO Amplifier. Two external RF bypass capacitor (10 pF & 10,000 pF) are required.
5
IF Por t
IF Por t: This pin is DC coupled. For applications not requiring operation to DC, this por t should be DC blocked externally using a series capacitor whose values has been chosen to pass the necessar y IF frequency range. For operation to DC, this pin must not source/sink more than 4mA of current or die non-function and possible die failure will result.
8
RF Por t
RF Por t: This pin is AC coupled and matched to 50 ohm from 0.8 - 1.2 GHz.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at sales@hittite.com
v00.0901
MICROWAVE CORPORATION
HMC353MS8
GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz
Evaluation PCB for HMC353MS8
5
MIXERS - SMT
The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.
Evaluation Circuit Board Layout Design Details
Item J1 - J4 C1 C2 L1 U1 PCB* Description PC Mount SMA RF Connector 10 pF Chip Capacitor, 0603 Pkg. .01 F Chip Capacitor, 0603 Pkg. 6.8 nH Inductor, 0805 Pkg. HMC353MS8 Mixer 103928 Evaluation Board
* Circuit Board Material: Rogers 4350
5 - 284
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at sales@hittite.com
v00.0901
MICROWAVE CORPORATION
HMC353MS8
GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz
HMC353MS8 Application Circuit
5
MIXERS - SMT
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at sales@hittite.com
5 - 285

▲Up To Search▲

Price & Availability of HMC353MS8

	To Download HMC353MS8 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .