View ZL60003TBD_1339222.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ZL60003 RCLED 650 nm, Plastic Optical Fiber Communications - 125 to 250 Mbps
Data Sheet
June 2004
Ordering Information ZL60003/TBD TO-46 Package
-20C to +70C
CASE
Features
* * * * * * Optimized wavelength for Plastic optical fiber High Bandwidth No threshold Surface emitting High coupling efficiency Hermetically sealed
ANODE
CATHODE
Bottom View
Figure 1 - Pin Description
Description
This unique Resonant Cavity Surface-Emitting LED (RCLED) is designed for optical communications over Plastic Optical Fiber (POF) in applications such as Fast Ethernet, IEEE1394b (S100, S200) and 155 Mbps ATM. Optimised high-speed performance can be achieved by use of a suitable electrical preemphasis within the drive circuitry. ZL60003 is also well suited for applications where visible light is required, such as in sensing and positioning.
Applications
* * * * * Fast Ethernet IEEE1394b 155 Mbps ATM Home networking Industrial applications
1
Zarlink Semiconductor Inc. Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc. Copyright 2003-4, Zarlink Semiconductor Inc. All Rights Reserved.
ZL60003
Optical and Electronic characteristics (25C Case temperature) Parameter Fiber-Coupled Power Optical Power Beam Divergence (FWHM) Rise and Fall Time Peak Wavelength Spectral Width (FWHM) Forward Voltage
Note 1: Note 2:
Data Sheet
Symbol Pfiber Po 21/2 tR ,tF p VF
Min. 1.2
Typ.
Max.
Unit mW
Test Condition IF = 30 mA (Note1) IF = 30 mA IF = 30 mA IF = 30 mA (Note1,2) IF = 30 mA (Note1) IF = 30 mA (Note1) IF = 30 mA
2.0 25 3.5 640 650 660 20 2.3
mW deg ns nm nm V
Fiber: POF 980/1000 m Step Index, NA=0.48. For high speed communication, a low NA POF or a graded index POF are recommended. Unfiltered 20%-80% measurement. Note significant improvements can be achieved by use of pre-emphasis in the drive circuitry.
Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Electrical Power Dissipation Continuous Forward Current (f<10 kHz) Peak Forward Current (duty cycle<50%,f>1 MHz Reverse Voltage Soldering Temperature (2 mm from the case for 10 sec.) Symbol Tstg Top Ptot IF IFRM VR Tsld Limit -55 to +125C -20 to +70C 130 mW 40 mA 85 mA 5V 260C
Thermal Characteristics Parameter Thermal Resistance - Infinite Heat Sink Thermal Resistance - No Heat Sink Temp. Coefficient - Wavelength Optical Power - Fiber Coupled Symbol Rthjc Rthja d/dTj dPf/dTj Min. Typ. 200 500 0.08 -0.7 Max. Unit C/W C/W nm/C %/C
2
Zarlink Semiconductor Inc.
BOTTOM VIEW ( 10 : 1 )
3,8 2,54 0,6
n1,17 + 0,05 (3x) n0,45 + 0,03 (3x) -
SIDE VIEW
13,460,76
0
0,04
45
R2,7
R0,2 max (4x)
3, 6
1, 0 2 0, 3
Lens n1.50.05 R0,4 max
NOTES:1. All dimensions in mm. 2. General tol. ISO-2768-mK. 3. Coating: Case: Ni 1,5-2,5 m. Header: Ni 2-3 m / Au min 1,32 m.
n4,7
0,3 max glass overmould (2x)
(c) Zarlink Semiconductor 2002. All rights reserved.
Package code Previous package codes
Drawing type
ISSUE ACN DATE
1
JS004 076R1 A
TB
Package drawing, TO-46 with lens Title
22-MAR-03
APPRD. TD/BE
JS004076
For more information about all Zarlink products visit our Web Site at
www.zarlink.com
Information relating to products and services furnished herein by Zarlink Semiconductor Inc. or its subsidiaries (collectively "Zarlink") is believed to be reliable. However, Zarlink assumes no liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such information, product or service or for any infringement of patents or other intellectual property rights owned by third parties which may result from such application or use. Neither the supply of such information or purchase of product or service conveys any license, either express or implied, under patents or other intellectual property rights owned by Zarlink or licensed from third parties by Zarlink, whatsoever. Purchasers of products are also hereby notified that the use of product in certain ways or in combination with Zarlink, or non-Zarlink furnished goods or services may infringe patents or other intellectual property rights owned by Zarlink. This publication is issued to provide information only and (unless agreed by Zarlink in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other information appearing in this publication are subject to change by Zarlink without notice. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. Manufacturing does not necessarily include testing of all functions or parameters. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to Zarlink's conditions of sale which are available on request.
Purchase of Zarlink's I2C components conveys a licence under the Philips I2C Patent rights to use these components in and I2C System, provided that the system conforms to the I2C Standard Specification as defined by Philips. Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc. Copyright Zarlink Semiconductor Inc. All Rights Reserved.
TECHNICAL DOCUMENTATION - NOT FOR RESALE

▲Up To Search▲

Price & Availability of ZL60003TBD

	To Download ZL60003TBD Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .