 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| VRE105/107 Precision Reference Supplies THALER CORPORATION * 2015 N. FORBES BOULEVARD * TUCSON, AZ. 85745 * (520) 882-4000 FEATURES * VERY HIGH ACCURACY: 5.000 V 0.4 mV * EXTREMELY LOW DRIFT: 0.6 ppm/C -55C to +125C * EXCELLENT STABILITY: 6 ppm/1000 Hrs. Typ. * EXCELLENT LINE REGULATION: 6 ppm/V Typ. * WIDE SUPPLY RANGE: 13.5 V to 22.0 V * HERMETIC 14-PIN CERAMIC DIP * MILITARY PROCESSING OPTION APPLICATIONS * PRECISION A/D and D/A CONVERTERS * TRANSDUCER EXCITATION * ACCURATE COMPARATOR THRESHOLD REFERENCE * HIGH RESOLUTION SERVO SYSTEMS * DIGITAL VOLTMETERS * HIGH PRECISION TEST and MEASUREMENT INSTRUMENTS DESCRIPTION VRE105 Series Precision Voltage References provide ultrastable +5.000 V (VRE105) and 5.000 V (VRE107) outputs with 0.4 mV initial accuracy and temperature coefficient as low as 0.6 ppm/C over the full military temperature range. This impovement in accuracy is made possible by a unique, proprietary multipoint laser compensation technique developed by Thaler Corporation. Significant improvements have been made in other performance parameters as well, including initial accuracy, warm-up drift, line regulation, and long-term stability, making the VRE105 series the most accurate and stable 5V references available. SELECTION GUIDE Type VRE105C VRE105CA VRE105M VRE105MA VRE107C VRE107CA VRE107M VRE107MA Output +5V +5V +5V +5V 5V 5V 5V 5V Temperature Max. Volt Operating Range Deviation -25C to +85C 0.4mV -25C to +85C 0.2mV -55C to +125C 0.6mV -55C to +125C 0.3mV -25C to +85C -25C to +85C -55C to +125C -55C to +125C 0.4mV 0.2mV 0.6mV 0.3mV VRE105 series devices are available in two operating temperature ranges, -25C to +85C and -55C to +125C, and two performance grades. All devices are packaged in 14-pin hermetic ceramic packages for maximum long-term stablity. "M" versions are screened for high reliability and quality. Superior stability, accuracy, and quality make these references ideal for precision applications such as A/D and D/A converters, high accuracy test and measurement instrumentation, and tranducer excitation. VRE105DS REV. C SEPT 1994 4-32 ELECTRICAL SPECIFICATIONS Vps =15V, T = 25C, RL = 10K unless otherwise noted. VRE105/107 CA MIN TYP MAX MIN MODEL PARAMETERS MIN C TYP MAX M MA UNITS TYP MAX MIN TYP MAX ABSOLUTE MAXIMUM RATINGS Power Supply 13.5 22 Operating Temperature -25 85 Storage Temperature -65 150 Short Circuit Protection Continuous OUTPUT VOLTAGE VRE105 VRE107 +5 5 * * * * * * V V * * * * * * * * -55 * * * 125 * * -55 * * * 125 * V C C OUTPUT VOLTAGE ERRORS Initial Error Warmup Drift Tmin - Tmax (1) Long-Term Stability Noise (.1-10Hz) OUTPUT CURRENT Range REGULATION Line Load OUTPUT ADJUSTMENT Range Temperature Coefficient POWER SUPPLY CURRENTS VRE105 +PS VRE107 +PS VRE107 -PS NOTES: *Same as C Models. (2) 800 2 400 6 3 * * 1 400 2 200 * * 800 1 600 * * 400 300 V ppm V ppm/1000hr. Vpp 10 * * * mA 6 3 10 * * * * * * * * * ppm/V ppm/mA 10 4 * * * * * * mV V/C/mV 5 7 4 7 9 6 * * * * * * * * * * * * * * * * * * mA mA mA 1.Using the box method, the specified value is the maximum deviation from the output voltage at 25C over the specified operating temperature range. 2.The specified values are unloaded. VRE105DS REV. C SEPT 1994 4-32 TYPICAL PERFORMANCE CURVES VOUT vs. TEMPERATURE VOUT vs. TEMPERATURE VOUT vs. TEMPERATURE VOUT vs. TEMPERATURE Temperature oC VRE105/107C Temperature oC VRE105/107CA Temperature oC VRE105/107M Temperature oC VRE105/107MA VRE105 QUIESCENT CURRENT VS. TEMP JUNCTION TEMP. RISE VS. OUTPUT CURRENT PSRR VS. FREQUENCY Temperature oC Output Current (mA) Frequency (Hz) VRE107 POSITIVE OUTPUT QUIESCENT CURRENT VS. TEMP JUNCTION TEMP. RISE VS. OUTPUT CURRENT PSRR VS. FREQUENCY Temperature oC Output Current (mA) NEGATIVE OUTPUT Frequency (Hz) QUIESCENT CURRENT VS. TEMP JUNCTION TEMP. RISE VS. OUTPUT CURRENT PSRR VS. FREQUENCY Temperature oC Output Current (mA) Frequency (Hz) VRE105DS REV. C SEPT.1994 4-34 DISCUSSION OF PERFORMANCE THEORY OF OPERATION The following discussion refers to the schematic below. A FET current source is used to bias a 6.3V zener diode. The zener voltage is divided by the resistor network R1 and R2. This voltage is then applied to the noninverting input of the operational amplifier which amplifies the voltage to produce a 5.000V output. The gain is determined by the resistor networks R3 and R4: G=1 + R4/R3. The 6.3V zener diode is used because it is the most stable diode over time and temperature. The current source provides a closely regulated zener current, which determines the slope of the reference's voltage vs. temperature function. By trimming the zener current, a lower drift over temperature can be achieved. But since the voltage vs. temperature function is nonlinear, this method leaves a residual error over wide temperature ranges. To remove this residual error, Thaler Corporation has developed a nonlinear compensation network of thermistors and resistors that is used in the VRE105 series references. This proprietary network eliminates most of the nonlinearity in the voltage vs. temperature function. By then adjusting the slope, Thaler Corporation produces a very stable voltage over wide temperature ranges. This network is less than 2% of the overall network resistance so it has a negligible effect on long term stability. APPLICATION INFORMATION Figure 1 shows the proper connection of the VRE105 series voltage reference with the optional trim resistors. When trimming the VRE107, the positive voltage should be trimmed first since the negative voltage tracks the positive side. Pay careful attention to the circuit layout to avoid noise pickup and voltage drops in the lines. The VRE105 series voltage references have the ground terminal brought out on two pins (pin 6 and pin 7) which are connected together internally. This allows the user to achieve greater accuracy when using a socket. Voltage references have a voltage drop across their power supply ground pin due to quiescent current flowing through the contact resistance. If the contact resistance was constant with time and temperature, this voltage drop could be trimmed out. When the reference is plugged into a socket, this source of error can be as high as 20ppm. By connecting pin 7 to the power supply ground and pin 6 to a high impedance ground point in the measurement circuit, the error due to the contact resistance can be eliminated. If the unit is soldered into place the contact resistance is sufficiently small that it doesn't effect performance. VRE105 VRE107 VRE105DS REV. C SEPT 1994 4-35 EXTERNAL CONNECTIONS FIGURE 1 3. Optional Fine Adjust for approximately 10mV. PIN CONFIGURATION TOP VIEW NC NC NC NC NC REF. GND GND FINE ADJ. +5V FINE ADJ. FINE -ADJ. -5V FINE -ADJ. -PS NC REF. GND GND TOP VIEW FINE +ADJ. +5V FINE +ADJ. VRE105 +PS NC NC NC VRE107 +PS NC NC NC MECHANICAL 14-PIN HYBRID PACKAGE INCHES DIM E L D B B1 B2 S P MIN .480 .195 .775 .016 .038 .095 .085 .004 MAX .500 .215 .805 .020 .042 .105 .105 .006 MILLIMETER MIN 12.1 4.9 19.7 0.4 0.9 2.4 2.1 0.10 MAX 12.7 5.4 20.4 0.5 1.0 2.6 2.6 0.15 DIM A Q Q1 C G1 INCHES MIN .120 .015 N/A .009 .290 MAX .155 .035 .030 .012 .310 MILLIMETER MIN 3.0 0.4 N/A 0.2 7.3 MAX 4.0 0.9 0.7 0.3 7.8 VRE105DS REV. C SEPT 1994 4-36 |
Price & Availability of VRE107MA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |