View UPC3237TK-E2-A_1332020.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PRELIMINARY PRODUCT INFORMATION
BIPOLAR ANALOG INTEGRATED CIRCUIT
PC3237TK
LOW NOISE WIDE BAND SILICON GERMANIUM MMIC AMPLIFIER FOR MOBILE COMMUNICATIONS
DESCRIPTION
T he P C 3237T K is a silicon germanium (S iG e) monolithic integrated circuit des igned as low nois e amplifier for the mobile digital T V etc. T his device exhibits low nois e figure and high power gain characteristics. T he package is 6-pin lead-les s minimold, s uitable for s urface mount. T his IC is manufactured using our UHS 2 (Ultra High S peed P roces s ) S iG e bipolar proces s .
FEATURES
* S upply voltage * Low current cons umption * Low nois e * P ower gain * High-dens ity surface mounting : VCC = 2.4 to 3.3 V (2.8 V T Y P .) : ICC = 5 mA T Y P. @ VCC = 2.8 V : NF = 1.4 dB T Y P . @ f = 470 MHz NF = 1.5 dB T Y P . @ f = 770 MHz : G P = 15.3 dB T Y P. @ f = 470 MHz G P = 13.5 dB T Y P . @ f = 770 MHz : 6-pin lead-les s minimold package (1.5 1.1 0.55 mm)
APPLICATION
* Low nois e amplifier for the mobile digital T V etc.
ORDERING INFORMATION
P art Number P C 3237T K -E 2 Order Number P C 3237T K -E 2-A P ackage 6-pin lead-les s minimold (1511 P K G ) (P b-F ree) Marking 6N S upplying F orm * 8 mm wide embos s ed taping * P in 1, 6 face the perforation s ide of the tape * Qty 5 kpcs /reel
Remark T o order evaluation s amples , contact your nearby s ales office. P art number for sample order: P C 3237T K-A
Caution Observe precautions when handling because these devices are sensitive to electrostaic discharge.
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Document No. ( edition) Date P ublis hed Ma y 2007 N S C P (N)
NEC Electronics Corporation 2007
PC3237TK
PIN CONNECTIONS
( Top View ) ( Top View ) ( Bottom View )
P in No. 1 P in Name NC G ND INP UT VCC G ND OUT P UT
1 2 3
61 52 43
66 55 44
1 2 3
ABSOLUTE MAXIMUM RATINGS
P arameter S upply V oltage C ircuit C urrent P ower Dis s ipation Operating Ambient T emperature S torage T emperature Input P ower S ymbol VCC ICC PD TA T s tg P in T A = +25 C T A = +25 C T A = +85C Note T es t C onditions R atings 3.6 10 203 40 to +85 55 to +150 +8 Unit V mA mW C C dB m
Note Mounted on double-s ide copper-clad 50
RECOMMENDED OPERATING RANGE
P arameter S upply V oltage Operating Ambient T emperature S ymbol VCC TA MIN. 2.4 40 T YP . 2.8 +25 MAX. 3.3 +85 Unit V C
6N 6N 6N
2 3 4 5 6
50
1.6 mm epoxy glas s PW B
2
PC3237TK
ELECTRICAL CHARACTERISTICS ( TA = +25 C, VCC = 2.8 V, ZS = ZL= 50 , unless otherwise specified )
P arameter C ircuit C urrent P ower G ain S ymbol ICC G P1 G P2 Nois e F igure NF 1 NF 2 Input R eturn L os s R Lin1 R Lin2 O utput R eturn L os s R Lout1 R Lout2 Is olation IS L 1 IS L 2 G ain 1 dB C ompres s ion Output P ower P O (1 dB )1 P O (1 dB )2 No S ignal f = 470MHz, P in = f = 770MHz, P in = f = 470MHz f = 770MHz f = 470MHz, P in = f = 770MHz, P in = f = 470MHz, P in = f = 770MHz, P in = f = 470MHz, P in = f = 770MHz, P in = f = 470MHz f = 770MHz 30 dB m 30 dB m 30 dB m 30 dB m 30 dB m 30 dB m 6.5 5.5 9 10 17 16 8 8 30 dB m 30 dB m T es t C onditions MIN. 3.5 13.0 11.0 T YP . 5 15.3 13.5 1.4 1.5 9.5 8.5 14 15 22 21 5.5 5.5 MAX. 7 17.5 16.0 1.9 2.0 Unit mA dB dB dB dB dB dB dB dB dB dB dB m dB m
TEST CIRCUIT
C2
1 2 6 5 4
50 OUT P UT
50 INP UT
C1
3
C4 VCC C3
COMPONENTS LIST S ymbol C 1, C 2 C3 C4 T ype C hip C apacitor C hip C apacitor F eed-through C apacitor Value 100pF 1000pF 1000pF
3
PC3237TK
STANDARD CHARACTERISTICS FOR REFERENCE ( TA = 25 C, VCC = 2.8 V, ZS = ZL = 50 , unless otherwise specified )
P arameter S aturated Output P ower S ymbol P O (s at)1 P O (s at)2 Input 3rd Order Dis tortion Intercept P oint Output 3rd Order Dis tortion Intercept P oint K factor IIP 3 1 IIP 3 2 OIP 3 1 OIP 3 2 K1 K2 T es t C onditions f = 470MHz, P in = 2 dB m f = 770MHz, P in = 2 dB m f1=470MHz, f2=471MHz f1=770MHz, f2=771MHz f1=470MHz, f2=471MHz f1=770MHz, f2=771MHz f = 470MHz f = 770MHz R eference 1.3 1.3 10.5 9.5 4.8 4.0 1.15 1.20 Unit dB m dB m dB m dB m dB m dB m
PACKAGE DIMENSIONS 6-PIN LEAD-LESS MINIMOLD (1511 PKG) (UNIT: mm)
4
PC3237TK
NOTES ON CORRECT USE
(1) O bs erve precautions for handling becaus e of electro-s tatic s ens itive devices . (2) F orm a ground pattern as widely as pos s ible to minimize ground impedance (to prevent undes ired os cillation). All the ground terminals mus t be connected together with wide ground pattern to decreas e impedance difference. (3) T he bypas s capacitor should be attached to VCC line. (4) T he DC cut capacitor s hould be attached to Input and O utput pin. (5) P in 1 (NC ) s hould be connected to the ground pattern.
RECOMMENDED SOLDERING CONDITIONS
T his product s hould be s oldered and mounted under the following recommended conditions . methods and conditions other than thos e recommended below, contact your nearby s ales office.
S oldering Method Infrared R eflow S oldering C onditions P eak temperature (package s urface temperature) T ime at peak temperature T ime at temperature of 220 C or higher P reheating time at 120 to 180 C Maximum number of reflow proces s es Maximum chlorine content of ros in flux (% mas s ) W ave S oldering P eak temperature (molten s older temperature) T ime at peak temperature Maximum number of flow proces s es Maximum chlorine content of ros in flux (% mas s ) P artial H eating P eak temperature (terminal temperature) S oldering time (per s ide of device) Maximum chlorine content of ros in flux (% mas s ) : 260 C or below : 10 s econds or les s : 60 s econds or les s : 120 30 s econds : 3 times : 0.2% (W t.) or below : 260 C or below : 10 s econds or les s : 1 time : 0.2% (W t.) or below : 350 C or below : 3 s econds or les s : 0.2% (W t.) or below HS 350 W S 260 C ondition S ymbol IR 260
F or s oldering
P reheating temperature (package s urface temperature) : 120 C or below
Caution Do not use different soldering methods together (except for partial heating).
5
PC3237TK
6
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of UPC3237TK-E2-A

	To Download UPC3237TK-E2-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .