 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TPCA8003-H TOSHIBA Field Effect Transistor Silicon N Channel MOS Type (Ultra High speed U-MOSIII) TPCA8003-H High Speed and High Efficiency DC-DC Converters Notebook PC Applications Portable Equipment Applications 6.00.3 0.50.1 8 1.27 0.40.1 5 Unit: mm 0.05 M A 5.00.2 * * * * * * * Small footprint due to small and thin package High speed switching Small gate charge: Qg = 25 nC (typ.) Low drain-source ON resistance: RDS (ON) = 5.1 m (typ.) High forward transfer admittance: |Yfs| = 60S (typ.) Low leakage current: IDSS = 10 A (max) (VDS = 30 V) Enhancement mode: Vth = 1.1 to 2.3 V (VDS = 10 V, ID = 1 mA) 0.150.05 1 5.00.2 0.950.05 4 0.595 A 0.1660.05 S 1 0.05 S 4 1.10.2 0.60.1 Maximum Ratings (Ta = 25C) Characteristics Drain-source voltage Drain-gate voltage (RGS = 20 k) Gate-source voltage Drain current DC (Note 1) Symbol VDSS VDGR VGSS ID IDP PD PD PD EAS IAR (Tc=25) (Note 4) Channel temperature Storage temperature range EAR Tch Tstg Rating 30 30 20 35 105 45 2.8 Unit V V V A W W 4.250.2 8 5 1,2,3SOURCE 5,6,7,8DRAIN 0.80.1 JEDEC JEITA TOSHIBA 2-6J1B Pulsed (Note 1) (Tc=25) (t = 10 s) (Note 2a) Drain power dissipation Drain power dissipation Weight: 0.080 g (typ.) Drain power dissipation (t = 10 s) (Note 2b) Circuit Configuration 1.6 W Single pulse avalanche energy (Note 3) Avalanche current Repetitive avalanche energy 159 35 4.5 150 -55 to 150 mJ A mJ C C 8 7 6 3.50.2 4GATE 5 1 2 3 4 Note: For (Note 1), (Note 2), (Note 3), (Note 4), please refer to the next page. This transistor is an electrostatic sensitive device. Please handle with caution. 1 2003-8-7 TPCA8003-H Thermal Characteristics Characteristics Thermal resistance, channel to case (Tc=25) Thermal resistance, channel to ambient (t = 10 s) (Note 2a) Symbol Rth (ch-c) Max 2.78 Unit C/W Rth (ch-a) 44.6 C/W Thermal resistance, channel to ambient (t = 10 s) (Note 2b) Rth (ch-a) 78.1 C/W Marking (Note 5) TPCA 8003-H Type Lot No. Note 1: Please use devices on condition that the channel temperature is below 150C. Note 2: (a) Device mounted on a glass-epoxy board (a) (b) Device mounted on a glass-epoxy board (b) FR-4 25.4 x 25.4 x 0.8 (Unit: mm) FR-4 25.4 x 25.4 x 0.8 (Unit: mm) (a) (b) Note 3: VDD = 24 V Tch = 25C (initial) L = 0.1 mH RG = 25 IAR = 35 A Note 4: Repetitive rating: pulse width limited by max channel temperature Note 5: * Weekly code: (Three digits) Week of manufacture (01 for first week of year, continues up to 52 or 53) Year of manufacture (One low-order digits of calendar year) 2 2003-8-7 TPCA8003-H Electrical Characteristics (Ta = 25C) Characteristics Gate leakage current Drain cut-OFF current Drain-source breakdown voltage Gate threshold voltage Drain-source ON resistance Forward transfer admittance Input capacitance Reverse transfer capacitance Output capacitance Rise time Turn-ON time Switching time Fall time Turn-OFF time Total gate charge (gate-source plus gate-drain) Gate-source charge 1 Gate-drain ("miller") charge Gate switch charge tf toff Qg Qgs1 Qgd QSW VDD 24 V, VGS = 10 V, ID = 35 A - Symbol IGSS IDSS V (BR) DSS V (BR) DSX Vth RDS (ON) |Yfs| Ciss Crss Coss tr VGS ton 10 V 0V 4.7 VDS = 10 V, VGS = 0 V, f = 1 MHz Test Condition VGS = 16 V, VDS = 0 V VDS = 30 V, VGS = 0 V ID = 10 mA, VGS = 0 V ID = 10 mA, VGS = -20 V VDS = 10 V, ID = 1 mA VGS = 4.5 V, ID = 18 A VGS = 10 V, ID = 18 A VDS = 10 V, ID = 18 A Min 30 15 1.1 30 ID = 18 A VOUT RL =0.83 Typ. 7.3 5.1 60 1465 175 610 4 11 10 36 25 13 5.8 5.1 8.4 Max 10 10 2.3 9.5 6.6 ns pF Unit A A V V m S VDD 15 V - Duty < 1%, tw = 10 s = VDD 24 V, VGS = 10 V, ID = 35 A - VDD 24 V, VGS = 5 V, ID = 35 A - nC Source-Drain Ratings and Characteristics (Ta = 25C) Characteristics Drain reverse current Forward voltage (diode) Pulse (Note 1) Symbol IDRP VDSF Test Condition Min Typ. Max 105 Unit A V IDR = 35 A, VGS = 0 V -1.2 3 2003-8-7 TPCA8003-H ID - VDS 50 10 8 6 5 4.5 4 3.6 3.8 3.4 3.2 COMMON SOURCE Ta = 25C PULSE TEST 20 10 8 6 4.5 4 4.1 ID - VDS COMMON SOURCE Ta = 25C PULSE TEST 3.6 12 3.4 8 3.2 3 2.8 VGS = 2.6V DRAIN CURRENT ID (A) 40 DRAIN CURRENT ID (A) 5 16 3.8 30 20 3 10 2.8 4 0 0 0.2 0.4 0.6 0.8 1 0 0 VGS = 2.6V 1 2 3 4 5 DRAIN-SOURCE VOLTAGE VDS (V) DRAIN-SOURCE VOLTAGE VDS (V) ID - VGS VDS (V) 100 COMMON SOURCE 0.4 VDS - VGS COMMON SOURCE Ta = 25 0.32 PULSE TEST DRAIN CURRENT ID (A) 80 VDS = 10 V PULSE TEST 60 DRAIN-SOURCE VOLTAGE 0.24 ID = 35 A 40 Ta = -55C 20 100 25 0 0 1 2 3 4 5 6 0.16 0.08 18 9 0 0 2 4 6 8 10 GATE-SOURCE VOLTAGE VGS (V) GATE-SOURCE VOLTAGE VGS (V) Yfs - ID FORWARD TRANSFER ADMITTANCE Yfs (S) 1000 10 RDS (ON) - ID DRAIN-SOURCE ON RESISTANCE RDS (ON) (m) COMMON SOURCE Ta = 25C PULSE TEST 100 Ta = -55C 10 100 25 1 4.5 VGS = 10 V 1 COMMON SOURCE VDS = 10 V 0.1 0.1 PULSE TEST 1 10 100 0.1 0.1 1 10 100 DRAIN CURRENT ID (A) DRAIN CURRENT ID (A) 4 2003-8-7 TPCA8003-H RDS (ON) - Ta 20 1000 COMMON SOURCE 16 ID = 35A 12 18 9 8 VGS = 4.5 V IDR - VDS COMMON SOURCE Ta = 25C PULSE TEST 100 10 3 10 4.5 DRAIN-SOURCE ON RESISTANCE RDS (ON) (m ) DRAIN REVERSE CURRENT IDR (A) PULSE TEST 4 VGS = 10 V 0 -80 ID = 35A,18A,9A 1 1 VGS = 0 V 0.1 0 -40 0 40 80 120 160 -0.2 -0.4 -0.6 -0.8 -1.0 AMBIENT TEMPERATURE Ta (C) DRAIN-SOURCE VOLTAGE VDS (V) CAPACITANCE - VDS 10000 2.5 Vth - Ta GATE THRESHOLD VOLTAGE Vth (V) (pF) Ciss 1000 2 C 1.5 CAPACITANCE Coss 100 COMMON SOURCE VGS = 0 V f = 1 MHz Tc = 25C 10 0.1 1 10 100 Crss 1 COMMON SOURCE 0.5 VDS = 10 V ID = 1 mA PULSE TEST 0 -80 -40 0 40 80 120 160 DRAIN-SOURCE VOLTAGE VDS (V) AMBIENT TEMPERATURE Ta (C) DYNAMIC INPUT / OUTPUT CHARACTERISTICS VDS (V) DRAIN-SOURCE VOLTAGE 50 20 DRAIN POWER DISSIPATION PD (W) 40 VDD = 6 V 30 VDS 20 VGS 24 COMMON SOURCE 10 ID = 35 A Ta = 25C PULSE TEST 0 0 8 16 24 32 12 16 12 8 4 0 40 TOTAL GATE CHARGE Qg (nC) 5 2003-8-7 TPCA8003-H rth - tw TRANSIENT THERMAL IMPEDANCE rth (/W) 1000 (1) Device mounted on a glass-epoxy board (a) (Note 100 (Note (3) Tc=25 2a) 2b) (1) (2) (2) Device mounted on a glass-epoxy board (b) 10 (3) 1 SINGLE PULSE 0.1 0.001 0.01 0.1 1 10 100 1000 PULSE WIDTH tw (s) PD - Ta 3 (1) (1)Device mounted on a glass-epoxy board(a) (Note 2a) (2)Device mounted on a glass-epoxy board(b) 10s (Note 2b) PD - Tc 50 2.5 DRAIN POWER DISSIPATION PD (W) DRAIN POWER DISSIPATION PD (W) 40 2 (2) 1.5 30 20 1 0.5 10 0 0 40 80 120 160 0 0 40 80 120 160 AMBIENT TEMPERATURE Ta (C) CASE TEMPERATURE Tc (C) SAFE OPERATING AREA 1000 DRAIN CURRENT ID (A) ID max (PULSED) * 100 t=1ms t=10ms 10 ID max (CONTINUOUS) * DC SINGLE NONREPETITIVE PULSE 1 CURVES LINEARLY Tc=25 MUST WITH BE DERATED IN INCREASE TEMPERATURE. 0.1 0.1 VDSS max 1 10 100 DRAIN-SOURCE VOLTAGE VDS (V) 6 2003-8-7 TPCA8003-H RESTRICTIONS ON PRODUCT USE 000707EAA * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 7 2003-8-7 |
Price & Availability of TPCA8003-H
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |