 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Product Bulletin OPF522 February 1996 5 MBd Fiber Optic Receiver Type OPF522 VCC GND OUTPUT Features *Component pre-mounted and ready to *Pre-tested with fiber to assure *Popular style receptacle *Optimized for fiber optic applications using 50 to 200 micron fiber performance use Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55o C to +115o C Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40o C to +85o C Lead Soldering Temperature (for 10 sec.). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260o C Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 to 7.0 V Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mA Output Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 to 18.0 V Open Collector Power Dissipation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mW Fan Out (TTL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5(1) Description The OPF522 contains a monolithic photo-IC comprised of a photodetector and DC amplifier driving an open collector output Schottky transistor. The output makes the OPF522 compatible with TTL and CMOS logic. The receiver is designed to operate from a single +5V supply. It is essential that a bypass capacitor be connected from VCC to Common of the receiver. This component is susceptible to damage from electrostatic discharge (ESD). Normal static precautions should be taken in handling and assembly of this component to prevent ESD damage or degradation. Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 8-100 (972) 323-2200 Fax (972) 323-2396 Types OPF522 Electrical Characteristics (TA = 25o C unless otherwise noted) 4.75 VCC 5.25, Fiber Sizes 100 Microns, N.A. 0.35, BER 10-9 Symbol IOH VOL ICCH ICCL PRH Parameter High Level Output Current Low Level Output Voltage High Level Supply Current Low Level supply Current Peak Input Power Level Logic HIGH Min Typ 5 0.4 3.5 6.2 Max Units 250 0.5 6.3 10 -40 0.1 A V mA mA dBm W dBm W dBm W ns ns Test Conditions VO = 18 V, PR < -40 dBm IO = 8 mA, PR > -24 dBm VCC = 5.25 V, PR < -40 dBm VCC = 5.25 V, PR > -24 dBm = 840 nm(2) p = 840 nm, IOL = 8 mA(2) p -40o C TA +85o C PR = -21 dBm, Data Rate = 5 MBd Peak Input Power Level Logic LOW PRL -25.4 2.9 -24 4.0 -9.2 120 -10 100 65 49 tPLHR tPHLR Notes: Propagation Delay LOW to HIGH Propagation Delay HIGH to LOW (1) 8 mA load (5 x 1.6 mA), RL = 560 . (2) Measured at the end of 100/140 m fiber cable with a large area detector. Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible. Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 (972)323-2200 Fax (972)323-2396 8-101 Types OPF522 |
Price & Availability of OPF522
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |