![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
NTE824 Integrated Circuit Low Noise Dual Preamplifier Description: The NTE824 is a dual preamplifier for the amplification of low level signals in applications requiring optimum noise performance. Each of the two amplifiers is completely independent, with an internal power supply decoupler-regulator, providing 110dB supply rejection and 60dB channel separation. Other outstanding features include high gain (104dB), large output voltage swing (VCC -2V)p-p, and wide power bandwidth (75kHz, 20Vp-p). The device operates from a single supply across the wide range of 9V to 30V. The amplifiers are internally compensated for gains greater than 10. Features: D Low Noise: 1.0V Total Input Noise D High Gain: 104dB Open Loop D Single Supply Operation D Wide Supply Range: 9V to 30V D Power Supply Rejection: 110dB D Large Output Voltage Swing (VCC-2V)p-p D Wide Bandwidth 15MHz Unity Gain D Power Bandwidth 75kHz, 20Vp-p D Internally Compensated D Short Circuit Protected Absolute Maximum Ratings: Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +30V Power Dissipation (Note 1), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 660mW Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to +70C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 to +150C Lead Temperature (During Soldering, 10sec), TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +300C Note 1 For operation in ambient temperatures above 25C, the device must be derated based on a 150C maximum junction temperature and a thermal resistance of 187C/W junction to ambient. Electrical Characteristics: (TA = +25C, VCC = 14V, unless otherwise specified) Parameter Voltage Gain Supply Current Input Resistance Positive Input Negative Input Input Current, Negative Input Output Resistance Output Current Open Loop Source Sink Output Voltage Swing Unity Gain Bandwidth Large Signal Frequency Response Maximum Input Voltage Supply Rejection Ratio Input Referred Channel Separation Total Harmonic Distortion Total Equivalent Input Noise (Flat Gain Circuit) 20VP-P (VCC > 24V), THD 1% Linear Operation f = 1kHz f = 1kHz 60dB Gain, f = 1kHz 10 to 10,000Hz Peak-to-Peak Test Conditions Open Loop, f = 100Hz VCC = 9V to 30V, RL = Min - - 50 - - - - - - - - - - 40 - - Typ 160,000 10 100 200 0.5 150 8 2 VCC-2 15 75 - 110 60 0.1 1.0 Max - - - - 3.1 - - - - - - 300 - - 0.5 1.2 mA k k A mA mA V MHz kHz mVrms dB dB % Vrms Unit Pin Connection Diagram (+) Input 1 1 (-) Input 1 2 GND 3 Output 1 4 8 5 8 (+) Input 2 7 (-) Input 2 6 VCC 5 Output 2 .260 (6.6) 1 .390 (9.9) Max .155 (3.93) 4 .300 (7.62) .100 (2.54) .300 (7.62) .145 (3.68) |
Price & Availability of NTE824
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |