![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Preliminary NJM2741 Single Supply Single Operational Amplifier with Full Swing Output GENERAL DESCRIPTION The NJM2741 is a low supply voltage operational amplifier with Full swing output. It is suitable for audio section of portable sets, PCs and any General-purpose use. FEATURES Operating Voltage Output Full Swing Offset Voltage Slew Rate . Low Distortion . Low Input Voltage Noise Bipolar Technology Package Outline PIN CONFIGURATION PACKAGE OUTLINE NJM2741F NJM2741F3 :2.5V to 14V : VOH 4.9V Typ. (at V+=5V, RL=5k) : VOL 0.1V Typ. (at V+=5V, RL=5k) :1mV Typ : 3.5V/s Typ. : 0.001% typ. (at V+=5V, f=1kHz) :10nV/Hz typ. : MTP5, SC88A 1 2 3 NJM2741F NJM2741F3 (Top View) + - 5 4 PIN FUNCTION 1. +INPUT 2. GND 3. -INPUT 4. OUTPUT + 5. V Ver.2004-11-26 -1- NJM2741 Preliminary ABSOLUTE MAXIMUM RATINGS PARAMETER Supply Voltage Differential Input Voltage Range Common Mode Input Voltage Range Power Dissipation Operating Temperature Range Storage Temperature Range SYMBOL V VID VICM PD Topr Tstg + RATINGS 15 15 (Note1) 0 to 15 (Note1) 390[MTP5] (Note2) 280[SC88A] (Note2) -40 to +85 -50 to +125 UNIT V V V mW C C (Note1) For supply voltage less than 15V, the absolute maximum input voltage is equal to the supply voltage. (Note2) On the PCB " EIA/JEDEC (76.2x114.3x1.6mm, two layers, FR-4) " OPERATING VOLTAGE (Ta=25C) PARAMETER Supply Voltage SYMBOL V + RATINGS 2.5 to 14 UNIT V ELECTRICAL CHARACTERISTICS DC CHARACTERISTICS (V+=5V,Ta=25C) PARAMETER Operating Current Input Offset Voltage Input Bias Current Input Offset Current Large Signal Voltage Gain Common Mode Rejection Ratio Supply Voltage Rejection Ratio Output Voltage Input Common Mode Voltage Range SYMBOL I CC VIO IB IIO AV CMR SVR VOH VOL VICM TEST CONDITION R L =, V I N =2.5V, No Signal Apply R S 10k MIN. 65 60 60 4.75 0 TYP. 2.2 1 100 5 85 75 80 4.9 0.1 MAX. 3.3 6 350 100 0.25 4 UNIT mA mV nA nA dB dB dB V V V R L 10k to 2.5V, Vo=0.5V to 4.5V 0V V CM 4V + + V =2.5V to 14V, V CM =V /2 R L =5k to 2.5V R L =5k to 2.5V CMR 60dB AC CHARACTERISTICS (V+=5V,Ta=25C) PARAMETER Unity Gain Bandwidth Phase Margin Equivalent Input Noise Voltage Total Harmonic Distortion SYMBOL GB M V NI THD TEST CONDITION f=10kHz, RL=10k to 2.5V RL=10k to 2.5V, CL=10pF f=1kHz, VCM=2.5V f=1kHz, AV=+2 RL=10k to 2.5V, Vo=1.5Vrms MIN. TYP. 10 75 10 0.001 MAX. UNIT MHz Deg nV/Hz % AC CHARACTERISTICS (V+=5V,Ta=25C) PARAMETER Slew Rate SYMBOL SR TEST CONDITION (Note 3), A V =1, V I N =2Vpp R L =10k to 2.5V, C L =10pF MIN. TYP. 3.5 MAX. UNIT V/s (Note 3) Number specified is the slower of the positive and negative slew rates. [CAUTION] The specifications on this data book are only given for information, without any guarantee as regards either mistakes or omissions. The application circuits in this data book are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. -2- Ver.2004-11-26 |
Price & Availability of NJM2741F3
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |