View LP379PPG1-C0G-03_1266846.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Cree(R) P4 LED
Model # LP379PPG-C0G-03 Data Sheet
120-degree, 7.6 x 7.6 LED lamp in pure-green color with water-transparent lens and stopper
Applications
* * * Advertising Signs Indicators Message Boards
Absolute Maximum Ratings (TA = 25C)
Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Lead Soldering Temperature
Note
Symbol IF IFP VR PD Topr Tstg Tsol
Absolute Maximum Rating 30 100 5 132 -40 ~ +100 -40 ~ +100
Unit mA mA V mW C C
Max. 260C for 3 sec. max. (3 mm from the base of the epoxy bulb)
Note: Pulse width 0.1 msec, duty 1/10.
Typical Electrical & Optical Characteristics (TA = 25C)
Characteristics Forward Voltage Reverse Current Dominant Wavelength Luminous Flux 50% Power Angle Symbol VF IR D V 21/2 Condition IF = 30 mA VR = 5 V IF = 30 mA IF = 30 mA IF = 30 mA Unit V A nm mlm deg 515 1000 527 2000 120 Minimum Typical 3.6 Maximum 4.4 100 535
D-CT119.000 Data Sheet: CL
Subject to change without notice. www.cree.com/ledlamps
Standard Bins for LP379PPG-C0G-03 (IF = 30 mA)
Lamps are sorted to luminous flux (V ), VF and dominant wavelength (D) bins shown. Orders for LP379PPG1-C0G-03 may be filled with any or all bins contained as below. All luminous flux (V ), VF and dominant wavelength (D) values shown and specified are at IF = 30 mA.
X6
X7
X8
X9 H or above
Luminous Flux (V)
G
F
E 515 nm 520 nm 525 nm 530 nm 535 nm
Dominant Wavelength (D)
Rank Luminous Flux Rank Voltage
V7 2.8-3.0 V
E
1000-1800 mlm
F
1500-2400 mlm
G
2000-3000 mlm
V8 3.0-3.2 V
V9 3.2-3.4 V
V10 3.4-3.6 V
V11 3.6-3.8 V
V12 3.8-4.0 V
V13 4.0-4.2 V
V14 4.2-4.4 V
Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. No tolerance in the measurement of luminous flux. 3. Tolerance of measurement of dominant wavelength is 1 nm. 4. Tolerance of measurement of VF is 0.05 V. 5. Packaging methods are available for selection; please refer to the "Cree LED Lamp Packaging Standard" document. 6. Please refer to the "Cree LED Lamp Reliability Test Standards" document for reliability test conditions. 7. Please refer to the "Cree LED Lamp Soldering & Handling" document for information about how to use this LED product safely.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
2
CLD-CT9.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Document No. SPE/LP379PPG1-C0G-03 Rev. No. 03
Graphs
Graphs
If (mA) -50 Vr(V) -40 -30 -20 -10 0 0.0 -10.0 -20.0 -30.0 -40.0 Vf(V) 3.4 3.8 4.2 4.6 5.0 REVERSE VOLTAGE. Ir(uA) FIG.2 REVERSE CURRENT VS. -50.0
100.0 80.0 60.0 40.0 20.0
0.0 3.0
FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE.
Half Power 2.5 2.0 1.5 1.0 0.5 0.0 0.0 If(mA) 20.0 40.0 60.0 80.0 100.0 100% 75% 50% 25% 0% 300
WL=38nm
Domi WL= 527nm
400
500
600
WL(nm) 700
FIG.3 RELATIVE LUMINOUS FLUX VS. FORWARD CURRENT
FIG.4 RELATIVE LUMINOUS FLUX VS. WAVELENGTH.
50 40 30 20 10 0
IF(mA)
50% Power Angle : 120 Ie(%)
0 100%
80%
60%
40%
Ta( C) 0 20 40 60 80 100 120
-90 -60 -30 0 30 60 90
20% 0%
FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=120 C)
FIG.6 FAR FIELD PATTERN
Items Prepared by Checked by Approved by FCN#
Signatures
LiuZM Aldosin David
Date
2005-07-07 2005-07-07 2005-07-07 Rev. No 03 Date
Revision History
Change Description 2005-07-07 Release.
FCN20050221
Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
3
CLD-CT9.000
4/4
Format #: COTCO-D-074
REV.4
Mechanical Dimensions
All dimensions are in mm. Tolerance is 0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may sion Draw ing Dimen be 0.5 mm max.
Document No. SPE/LP379PPG1-C0G-03 Rev. No. 03
maximum ting 0 00 5 32 +100 +100
Unit mA mA V mW
C C
Notes C for 3 sec Max.
e base of the epoxy bulb)
RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 25 Ta = 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment ) (RoHS), as amended through April 21, 2006.
s(
C
Vision Advisory Claim Users at the Condition should be cautioned not to stare Typ. light of this LED product. The bright light can damage the eye. Min. Max. Unit
F=
30mA
--CLD-CT9.000 ---
3.6 ---
4.4 100
V A
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
4 VR = 5V
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:
Standard/Custom
0: Standard C: Custom
VF
0: Full forward voltage distribution 1~9, A~Z . . . : special request *
Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV
1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request *
Packing type Product P/N
0: Standard = tube pack 1~9, A~Z . . . : special request *
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number LP379PPG1-C0G-03-00001 Description P4 120 Pure Green 527nm, FULL RANK, Tube Pack
* Please contact your Cree representative about the availability of non-standard kits.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
5
CLD-CT9.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps

▲Up To Search▲

Price & Availability of LP379PPG1-C0G-03

	To Download LP379PPG1-C0G-03 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .