View LD1585C05_1264155.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LD1585C series
5A Low dropout fast response positive voltage regulator adjustable and fixed
Features

Typical dropout 1.2V Fast transient response Three terminal adjustable or fixed output voltage 1.5V 1.8V, 2.5V, 2.85V, 3.3V, 5V, 8V, 9V Guaranteed output current up to 5A Output tolerance 1% at 25C and 2% in full temperature range Internal power and thermal limit Wide operating temperature range 0C to 125C Package available: TO-220, D2PAK/A Pinout compatibility with standard adjustable VREG The most important feature of the device consist in lower dropout voltage and very fast transient response. A 2.85V output version is suitable for SCSI-2 active termination. Unlike PNP regulators, where a part of the output current is wasted as quiescent current, the LD1585C quiescent current flows into the load, so increase efficiency. Only a 10F minimum capacitor is need for stability. The device is supplied in TO-220, D2PAK and D2PAK/A. On chip trimming allows the regulator to reach a very tight output voltage tolerance, within 1% at 25C.
TO-220 D2PAK/A

Description
The LD1585C is a LOW DROP Voltage Regulator able to provide up to 5A of Output Current. Dropout is guaranteed at a maximum of 1.4V at the maximum output current, decreasing at lower loads. The device has been improved to be utilized in low voltage applications where transient response and minimum input voltage are critical.
Order codes
Part number TO-220 D2PAK/A (T&R) LD1585CD2M15R LD1585CD2M18R LD1585CD2M25R LD1585CD2M28R LD1585CD2M33R LD1585CV50 LD1585CD2M50R LD1585CD2M80R LD1585CD2M90R LD1585CV June 2007 LD1585CD2M-R Rev. 5 Output voltage 1.5 V 1.8 V 2.5 V 2.85 V 3.3 V 5.0 V 8.0 V 9.0 V ADJ 1/25
www.st.com 25
LD1585C series
Contents
1 2 3 4 5 6 7 8 Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Typical application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Typical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2/25
LD1585C series
Diagram
1
Figure 1.
Diagram
Schematic diagram
3/25
Pin configuration
LD1585C series
2
Figure 2.
Pin configuration
Pin connections (top view)
TO-220
D2PAK/A
4/25
LD1585C series
Maximum ratings
3
Table 1.
Maximum ratings
Absolute maximum ratings
Parameter DC Input Voltage Output Current Power Dissipation Storage Temperature Range Operating Junction Temperature Range Value 30 Internally Limited Internally Limited -55 to +150 0 to +125 Unit V mA mW C C
Symbol VI IO PD Tstg Top
Note:
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied Thermal data
Parameter Thermal resistance junction-case Thermal resistance junction-ambient TO-220 3 50 D2PAK/A 3 62.5 Unit C/W C/W
Table 2.
Symbol RthJC RthJA
5/25
Typical application
LD1585C series
4
Figure 3.
Typical application
Application circuits
VO = VREF(1+R2/R1)
6/25
LD1585C series
Electrical characteristics
5
Table 3.
Symbol VO VO VO Vd Iq Isc
Electrical characteristics
Electrical characteristics of LD1585C#15 (VI=4.5V, CI = CO =10F, TJ = 0 to 125C, unless otherwise specified.)
Parameter Output Voltage Test Conditions IO = 0 mA, TJ = 25C IO = 0 to 5A, VI = 3 to 25V (1) IO = 0 mA, VI = 3 to 15V IO = 0 mA, VI = 3 to 15V Load Regulation Dropout Voltage Quiescent Current Short Circuit Current Thermal Regulation SVR eN S S Supply Voltage Rejection IO = 0 to 5A, TJ = 25C IO = 0 to 5A IO = 5 A VI 25V VI - VO = 5V TJ = 25C, 30ms pulse f = 120 Hz, CO = 25F, IO = 5A VI - VO = 3 1V 60 5.5 TJ = 25C Min. 1.485 1.47 Typ. 1.5 1.5 0.005 0.005 0.05 0.05 1.2 5 7 0.004 75 0.003 0.5 TJ = 125C, 1000Hrs 0.03 1 0.02 Max. 1.515 1.53 0.2 0.2 0.3 0.5 1.4 10 Unit V V % % % % V mA A %/W dB % % %
Line Regulation
RMS Output Noise Voltage TJ = 25C, f =10Hz to 10KHz (% of VO) Temperature Stability Long Term Stability
1. See short-circuit current curve for available output current at fixed dropout.
7/25
Electrical characteristics
LD1585C series
Table 4.
Symbol VO VO VO Vd Iq Isc
Electrical characteristics of LD1585C#18 (VI=4.8V, CI = CO =10F, TJ = 0 to 125C, unless otherwise specified.)
Parameter Output Voltage Test Conditions IO = 0 mA, TJ = 25C IO = 0 to 5A, VI = 3.3 to 25V Line Regulation
(1)
Min. 1.782 1.764
Typ. 1.8 1.8 0.005 0.005 0.05 0.05 1.2 5
Max. 1.818 1.836 0.2
Unit V V mV
IO = 0 mA, VI = 3.3 to 15V, TJ = 25C IO = 0 mA, VI = 3.3 to 15V
0.2 0.3 mV 0.5 1.4 10 V mA A 0.02 %/W dB % % 1 %
Load Regulation Dropout Voltage Quiescent Current Short Circuit Current Thermal Regulation
IO = 0 to 5A, TJ = 25C IO = 0 to 5A IO = 5 A VI 25V VI - VO = 5.5V TJ = 25C, 30ms pulse f = 120 Hz, CO = 25F, IO = 5A VI - VO = 3 1V 60 5.5
7 0.004 75 0.003 0.5
SVR eN S S
Supply Voltage Rejection
RMS Output Noise Voltage TJ = 25C, f =10Hz to 10KHz (% of VO) Temperature Stability Long Term Stability TJ = 125C, 1000Hrs
0.03
1. See short-circuit current curve for available output current at fixed dropout.
8/25
LD1585C series
Electrical characteristics
Table 5.
Symbol VO VO VO Vd Iq Isc
Electrical characteristics of LD1585C#25 (VI=5.5V, CI = CO =10F, TJ = 0 to 125C, unless otherwise specified.)
Parameter Output Voltage Test Conditions IO = 0 mA, TJ = 25C IO = 0 to 5A, VI = 4 to 25V Line Regulation
(1)
Min. 2.475 2.45
Typ. 2.5 2.5 0.005 0.005 0.05 0.05 1.2 5
Max. 2.525 2.55 0.2
Unit V V mV
IO = 0 mA, VI = 4 to 15V, TJ = 25C IO = 0 mA, VI = 4 to 15V
0.2 0.3 mV 0.5 1.4 10 V mA A 0.02 %/W dB % % 1 %
Load Regulation Dropout Voltage Quiescent Current Short Circuit Current Thermal Regulation
IO = 0 to 5A, TJ = 25C IO = 0 to 5A IO = 5 A VI 25V VI - VO = 5.5V TJ = 25C, 30ms pulse f = 120 Hz, CO = 25F, IO = 5A VI - VO = 3 1V 60 5.5
7 0.004 75 0.003 0.5
SVR eN S S
Supply Voltage Rejection
RMS Output Noise Voltage TJ = 25C, f =10Hz to 10KHz (% of VO) Temperature Stability Long Term Stability TJ = 125C, 1000Hrs
0.03
1. See short-circuit current curve for available output current at fixed dropout.
9/25
Electrical characteristics
LD1585C series
Table 6.
Symbol VO VO VO Vd Iq Isc
Electrical characteristics of LD1585C#285 (VI=5.85V, CI = CO =10F, TJ = 0 to 125C, unless otherwise specified.)
Parameter Output Voltage Test Conditions IO = 0 mA, TJ = 25C IO = 0 to 5A, VI = 4.5 to 25V Line Regulation
(1)
Min. 2.821 2.793
Typ. 2.85 2.85 0.005 0.005 0.05 0.05 1.2 5
Max. 2.879 2.907 0.2
Unit V V mV
IO = 0 mA, VI = 4.5 to 15V, TJ = 25C IO = 0 mA, VI = 4.5 to 15V
0.2 0.3 mV 0.5 1.4 10 V mA A 0.02 %/W dB % % 1 %
Load Regulation Dropout Voltage Quiescent Current Short Circuit Current Thermal Regulation
IO = 0 to 5A, TJ = 25C IO = 0 to 5A IO = 5 A VI 25V VI - VO = 5.5V TJ = 25C, 30ms pulse f = 120 Hz, CO = 25F, IO = 5A VI - VO = 3 1V 60 5.5
7 0.004 75 0.003 0.5
SVR eN S S
Supply Voltage Rejection
RMS Output Noise Voltage TJ = 25C, f =10Hz to 10KHz (% of VO) Temperature Stability Long Term Stability TJ = 125C, 1000Hrs
0.03
1. See short-circuit current curve for available output current at fixed dropout.
10/25
LD1585C series
Electrical characteristics
Table 7.
Symbol VO VO VO Vd Iq Isc
Electrical characteristics of LD1585C#33 (VI=6.3V, CI = CO =10F, TJ = 0 to 125C, unless otherwise specified.)
Parameter Output Voltage Test Conditions IO = 0 mA, TJ = 25C IO = 0 to 5A, VI = 4.8 to 25V Line Regulation
(1)
Min. 3.267 3.234
Typ. 3.3 3.35 0.005 0.005 0.05 0.05 1.2 5
Max. 3.333 3.366 0.2
Unit V V mV
IO = 0 mA, VI = 4.8 to 15V, TJ = 25C IO = 0 mA, VI = 4.9 to 15V
0.2 0.3 mV 0.5 1.4 10 V mA A 0.02 %/W dB % % 1 %
Load Regulation Dropout Voltage Quiescent Current Short Circuit Current Thermal Regulation
IO = 0 to 5A, TJ = 25C IO = 0 to 5A IO = 5 A VI 25V VI - VO = 5.5V TJ = 25C, 30ms pulse f = 120 Hz, CO = 25F, IO = 5A VI - VO = 3 1V 60 5.5
7 0.004 75 0.003 0.5
SVR eN S S
Supply Voltage Rejection
RMS Output Noise Voltage TJ = 25C, f =10Hz to 10KHz (% of VO) Temperature Stability Long Term Stability TJ = 125C, 1000Hrs
0.03
1. See short-circuit current curve for available output current at fixed dropout.
11/25
Electrical characteristics
LD1585C series
Table 8.
Symbol VO VO VO Vd Iq Isc
Electrical characteristics of LD1585C#50 (VI=8V, CI = CO =10F, TJ = 0 to 125C, unless otherwise specified.)
Parameter Output Voltage Test Conditions IO = 0 mA, TJ = 25C IO = 0 to 5A, VI = 6.5 to 30V Line Regulation
(1)
Min. 4.95 4.9
Typ. 5 5 0.005 0.005 0.05 0.05 1.2 5
Max. 5.05 5.1 0.2
Unit V V mV
IO = 0 mA, VI = 6.5 to 20V, TJ = 25C IO = 0 mA, VI = 6.5 to 20V
0.2 0.3 mV 0.5 1.4 10 V mA A 0.02 %/W dB % % 1 %
Load Regulation Dropout Voltage Quiescent Current Short Circuit Current Thermal Regulation
IO = 0 to 5A, TJ = 25C IO = 0 to 5A IO = 5 A VI 25V VI - VO = 5.5V TJ = 25C, 30ms pulse f = 120 Hz, CO = 25F, IO = 5A VI - VO = 3 1V 60 5.5
7 0.004 75 0.003 0.5
SVR eN S S
Supply Voltage Rejection
RMS Output Noise Voltage TJ = 25C, f =10Hz to 10KHz (% of VO) Temperature Stability Long Term Stability TJ = 125C, 1000Hrs
0.03
1. See short-circuit current curve for available output current at fixed dropout.
12/25
LD1585C series
Electrical characteristics
Table 9.
Symbol VO VO VO Vd Iq Isc
Electrical characteristics of LD1585C#80 (VI=11V, CI = CO =10F, TJ = 0 to 125C, unless otherwise specified.)
Parameter Output Voltage Test Conditions IO = 0 mA, TJ = 25C IO = 0 to 5A, VI = 9.5 to 30V Line Regulation
(1)
Min. 7.92 7.84
Typ. 8 8 0.005 0.005 0.05 0.05 1.2 5
Max. 8.08 8.16 0.2
Unit V V mV
IO = 0 mA, VI = 9.5 to 20V, TJ = 25C IO = 0 mA, VI = 9.5 to 20V
0.2 0.3 mV 0.5 1.4 10 V mA A 0.02 %/W dB % % 1 %
Load Regulation Dropout Voltage Quiescent Current Short Circuit Current Thermal Regulation
IO = 0 to 5A, TJ = 25C IO = 0 to 5A IO = 5 A VI 25V VI - VO = 5.5V TJ = 25C, 30ms pulse f = 120 Hz, CO = 25F, IO = 5A VI - VO = 3 1V 60 5.5
7 0.004 75 0.003 0.5
SVR eN S S
Supply Voltage Rejection
RMS Output Noise Voltage TJ = 25C, f =10Hz to 10KHz (% of VO) Temperature Stability Long Term Stability TJ = 125C, 1000Hrs
0.03
1. See short-circuit current curve for available output current at fixed dropout.
13/25
Electrical characteristics
LD1585C series
Table 10.
Symbol VO VO VO Vd Iq Isc
Electrical characteristics of LD1585C#90 (VI=12V, CI = CO =10F, TJ = 0 to 125C, unless otherwise specified.)
Parameter Output Voltage Test Conditions IO = 0 mA, TJ = 25C IO = 0 to 5A, VI = 10.5 to 30V Line Regulation
(1)
Min. 8.91 8.82
Typ. 9 9 0.005 0.005 0.05 0.05 1.2 5
Max. 9.09 9.18 0.2
Unit V V mV
IO = 0 mA, VI = 10.5 to 20V, TJ = 25C IO = 0 mA, VI = 10.5 to 20V
0.2 0.3 mV 0.5 1.4 10 V mA A 0.02 %/W dB % % 1 %
Load Regulation Dropout Voltage Quiescent Current Short Circuit Current Thermal Regulation
IO = 0 to 5A, TJ = 25C IO = 0 to 5A IO = 5 A VI 25V VI - VO = 5.5V TJ = 25C, 30ms pulse f = 120 Hz, CO = 25F, IO = 5A VI - VO = 3 1V 60 5.5
7 0.004 75 0.003 0.5
SVR eN S S
Supply Voltage Rejection
RMS Output Noise Voltage TJ = 25C, f =10Hz to 10KHz (% of VO) Temperature Stability Long Term Stability TJ = 125C, 1000Hrs
0.03
1. See short-circuit current curve for available output current at fixed dropout.
14/25
LD1585C series Table 11.
Symbol VO VO VO Vd IO(min) Isc
Electrical characteristics
Electrical characteristics of LD1585C# (VI=4.25V, CI = CO =10F, TJ = 0 to 125C, unless otherwise specified.)
Parameter Output Voltage Test Conditions IO = 10mA, VI - VO = 3V, TJ = 25C IO = 10mA to 5A, VI - VO =1.5 to 25V Line Regulation
(1)
Min. 1.237 1.225
Typ. 1.25 1.25 0.015 0.1 0.1 0.25 1.2 3
Max. 1.263 1.275 0.2 0.2 0.3 0.5 1.4 10
Unit V V % % % % V mA A
IO = 10mA, VI = 2.75 to 15V TJ = 25C IO = 10mA, VI = 2.75 to 15V
Load Regulation Dropout Voltage Minimum Load Current Short Circuit Current Thermal Regulation
IO = 10mA to 5A, TJ = 25C IO = 0 to 5A IO = 5A VI = 25V VI - VO = 5.5V TJ = 25C, 30ms pulse f = 120 Hz, CO = 25F, CADJ = 25F, IO = 5A, VI - VO = 3 1V IO = 10 mA 60 5.5
7 0.004 75 50 0.2 0.003 0.5 100 5 0.02
%/W dB A A % % %
SVR IADJ IADJ eN S S
Supply Voltage Rejection Adjust Pin Current
Adjust Pin Current Change IO = 10mA to 5A, VI = 3 to 25V (1) RMS Output Noise Voltage TJ = 25C, f =10Hz to 10KHz (% of VO) Temperature Stability Long Term Stability TJ = 125C, 1000Hrs
0.5
1. See short-circuit current curve for available output current at fixed dropout.
15/25
Typical characteristics
LD1585C series
6
Figure 4.
Typical characteristics
(unless otherwise specified TJ=25C, CI=CO=10F tant.) Output voltage vs temperature Figure 5. Short circuit current vs dropout voltage
Figure 6.
Line regulation vs temperature
Figure 7.
Line regulation vs temperature
Figure 8.
Load regulation vs temperature
Figure 9.
Load regulation vs temperature
16/25
LD1585C series
Typical characteristics
Figure 10. Dropout voltage vs temperature
Figure 11. Dropout voltage vs output current
Figure 12. Adjust pin current vs input voltage Figure 13. Adjust pin current vs temperature
Figure 14. Adjust pin current change vs temperature
Figure 15. Quiescent current vs temperature
17/25
Typical characteristics
LD1585C series
Figure 16. Reference voltage vs temperature
Figure 17. Minimum load current vs temperature
Figure 18. Supply voltage rejection vs output current
Figure 19. Supply voltage rejection vs output current
Figure 20. Supply voltage rejection vs frequency
Figure 21. Supply voltage rejection vs frequency
18/25
LD1585C series
Typical characteristics
Figure 22. Supply voltage rejection vs temperature
Figure 23. Supply voltage rejection vs temperature
Figure 24. Line transient
Figure 25. Load transient
VI=15 to 16V, IO=200mA, CI = 1F(tant), CO=10F(tant)
VI=15 V, IO=0.1 to 5 A, CI = 10F(tant), CO=10F(tant)
Figure 26. Load transient
VI=7 V, IO=0.1 to 5 A, CI = 10F(tant), CO=10F(tant)
19/25
Package mechanical data
LD1585C series
7
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second Level Interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com.
20/25
LD1585C series
Package mechanical data
D2PAK/A MECHANICAL DATA
mm. DIM. MIN. A A1 A2 B B1 B2 C C2 D D1 E E1 G L L2 M R V2 0 4.88 15 1.27 2.4 0.4 8 0 10 8.5 5.28 15.85 1.4 3.2 0.192 0.591 0.050 0.094 0.016 8 4.40 2.49 0.03 0.7 0.8 1.14 0.45 1.23 8.95 8 10.4 0.394 0.335 0.208 0.624 0.055 0.126 TYP MAX. 4.60 2.69 0.23 0.93 1.3 1.7 0.60 1.36 9.35 MIN. 0.173 0.098 0.001 0.028 0.031 0.045 0.018 0.048 0.352 0.315 0.409 TYP. MAX. 0.181 0.106 0.009 0.037 0.051 0.067 0.024 0.054 0.368 inch
7106164/D
21/25
Package mechanical data
LD1585C series
TO-220 MECHANICAL DATA
DIM. A C D D1 E F F1 F2 G G1 H2 L2 L4 L5 L6 L7 L9 DIA. 13.0 2.65 15.25 6.2 3.5 3.75 0.49 0.61 1.14 1.14 4.95 2.4 10.0 16.4 14.0 2.95 15.75 6.6 3.93 3.85 0.511 0.104 0.600 0.244 0.137 0.147 mm. MIN. 4.40 1.23 2.40 1.27 0.70 0.88 1.70 1.70 5.15 2.7 10.40 0.019 0.024 0.044 0.044 0.194 0.094 0.393 0.645 0.551 0.116 0.620 0.260 0.154 0.151 TYP MAX. 4.60 1.32 2.72 MIN. 0.173 0.048 0.094 0.050 0.027 0.034 0.067 0.067 0.203 0.106 0.409 inch TYP. MAX. 0.181 0.051 0.107
P011C
22/25
LD1585C series
Package mechanical data
Tape & Reel D2PAK-P 2PAK-D 2PAK/A-P 2PAK/A MECHANICAL DATA
mm. DIM. MIN. A C D N T Ao Bo Ko Po P 10.50 15.70 4.80 3.9 11.9 10.6 15.80 4.90 4.0 12.0 12.8 20.2 60 14.4 10.70 15.90 5.00 4.1 12.1 0.413 0.618 0.189 0.153 0.468 0.417 0.622 0.193 0.157 0.472 13.0 TYP MAX. 180 13.2 0.504 0.795 2.362 0.567 0.421 0.626 0.197 0.161 0.476 0.512 MIN. TYP. MAX. 7.086 0.519 inch
23/25
Revision history
LD1585C series
8
Table 12.
Date
Revision history
Revision history
Revision 3 4 5 Mistake order codes - Table 1. Order codes has been updated. Order codes has been updated and the document has been reformatted. Changes
07-Oct-2004 20-Oct-2005 08-Jun-2007
24/25
LD1585C series
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
25/25

▲Up To Search▲

Price & Availability of LD1585C05

	To Download LD1585C05 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .