View INT2095_1254980.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INT2095
Intronic Semiconductor, Inc. Up Interface Transceiver INT2095 Features
* * * * * * * Pin-for-Pin replacement for industry-standard PEB2095 part Up to 2.0km line interface performance NT (LT) and TE mode support IOM1 and IOM2 backplane interface modes Special function pins for interface to other INT2095's or layer-2 devices Custom versions with Intronic core technology Low Power dynamic operation Single 5V supply 28-pin PLCC (standard) package
Description
The Intronic Semiconductor INT2095 is a fully featured replacement for the industry standard Up interface layer-1 device. It supports loop lengths up to 2.0km over AWG24 cable and provides all signal conditioning, equalization and adaptive threshold adjustment to optimize line performance. The backplane interface supports both IOM1 and IOM2 modes and provides access to all subchannels of the interface including B, D, CI and M-channels. Special function pins (X0-X4) and a master clock output are included in the device for integration with other INT2095's or layer-2 devices.
*
*
1 25
5
INT2095V5
11 12 18 19
March, 2001
INT2095
ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings (VSS = 0V, TJ = 250C)
Parameter Power Supply Voltage Input Voltage Output Voltage Input Current Output Current per I/O Storage Temperature Symbol VDD VI VO II IO TSTG Rated Values -0.3 to +7.0 -0.3 to +7.0 -0.3 to VDD -10 to +10 -10 to +10 -65 to +150 Unit V
mA
0
C
Recommended Operating Conditions (VSS = 0V)
Parameter Power Supply Voltage Junction Temperature Symbol VDD TJ Rated Values +4.75 to +5.25 -40 to +100 Unit V 0 C
DC Characteristics (Over Operating Range)
Parameter Symbol Conditions Rated Values Min Typ. Max. . 2.0 VDD 0.0 0.8 2.4 0.4 10 -10 -10 10 -10 10 TBD Unit
High Level Input Voltage Low Level Input Voltage High Level Output Voltage Low Level Output Voltage High Level Input Current Low Level Input Current 3-State Output Leakage Current Stand-by Current
VIH VIL VOH VOL II IO IOZH IOZL IDDQ
V
IOH = TBD IOL = TBD VIH = VDD VIL = VSS
uA
VIH = VDD, VIL = VSS
March, 2001
INT2095
Pin Descriptions
Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Signal VDDA N.C. X0 X4 X3 X1 XTAL_OUT XTAL1 XTAL2 M1 nRST X2 SDO FSC DCL SDI VSS VSS LIO2 LIO1 VDD VDD VDD2 VSSA CLK_EN DISS nTST M0 Type Supply Not Connected I/O I/O Input I/O Output Clock Oscillator Clock Oscillator Input Input Input Output I/O I/O Input Supply Supply I/O I/O Supply Supply Output Supply Input Output Input Input Description Analog Power, +5V Special Function Pin Special Function Pin Special Function Pin Special Function Pin Clock Output
Mode Select Asynchronous, Active-Low Reset Special Function Pin IOM/IOM2 Interface IOM/IOM2 Interface IOM/IOM2 Interface IOM/IOM2 Interface Ground Ground Line Connection Line Connection Digital Power, +5V Digital Power, +5V 2.5V Analog Reference Voltage Analog Ground Active High Clock Output Enable Disable Supply Active Low Test Mode Select Mode Select
March, 2001
INT2095
Operation Modes
Mode
IOM Interface M0 M1 DCL
TE
IOM1 0 0
TE
IOM2
NT
IOM1
NT
IOM2 1 1 Input: 4.096MHz
FSC
X0 X1
X2 X3 X4
0 1 1 (or tie to 0 nRST) Output: Output: Input: 512kHz, 1.536MHz, 1:1 512kHz 1:1 Duty Cycle, Duty Cycle, synchronized synchronized to U-interface to U-interface Output: Output: Input: 8kHz, 8kHz, 8kHz 1:1 Duty Cycle, 1:2 Duty Cycle, synchronized synchronized to U-interface to U-interface Output: Output: Output: 3.84MHz 3.84MHz CONF4 Output: Output: Output: 1.536MHz, 1:1 768kHz, 15.36MHz, Duty Cycle, 1:1 Duty Cycle, 1:1 Duty synchronized synchronized Cycle to U-interface to U-interface Input: 0 Input: 0 Input: 0 Input: ENCKB Input: ENCKB Input: MPF Output: Output: Input: PFOFF 2.56MHz, 1:2 2.56MHz, 1:2 Duty Cycle, Duty Cycle, Output: Output: 7.68MHz, 1:1 7.68MHz, 1:1 Duty Cycle, Duty Cycle, synchronized synchronized to U-interface to U-interface
Input: 8kHz
Input: TS0 Input: TS1
Input: TS2 Input: MPF Input: PFOFF
March, 2001
INT2095
Description of Terms
ENCKB: Enable clocks in TE mode, deactivated state. Active-low input signal. When high, the clock outputs are in the high impedance state. PFOFF: NT mode Powerfeed off state. Also indicated by a HI on the C/I channel. MPF: Main Power Feed serial input, 8-bits synchronous with the B1 channel of the IOM interface. CONF4: General purpose output which is programmed via the Monitor channel registers. TS2-TS0: IOM Timeslot assignment number (0 to 7) in NT mode.
March, 2001
INT2095
Connection Diagrams
VCC
2k
2k
2k
2k 8 200 5 7 6 11 2
TIP
SDI SDO FSC DCL
SDI SDO FSC DCL M0 M1 VCC nTST VDD2 10NF nRST
LIO1 VCC LIO2 DISS X0 X1 X2 X3 X4 XTAL1 200
RING
XTAL_OUT XTAL2 1UF 10NF INT2095_0_1 CLK_EN 15.36MHz
1M
RESETB
5PF
5PF
INT2095 applied in TE (IOM2)-Mode
March, 2001
INT2095
Connection Diagrams (cont.)
VCC
2k
2k
2k
2k 8 200 5 7 6 11 2
TIP1
SDI SDO FSC DCL
SDI SDO FSC DCL M0 M1 VCC nTST VDD2 10NF nRST
LIO1 VCC LIO2 DISS X0 X1 X2 X3 X4 XTAL1 200 VCC
RING1
XTAL_OUT XTAL2 1UF 10NF INT2095_1 CLK_EN
8 200 SDI SDO FSC DCL M0 M1 VCC nTST VDD2 10NF nRST LIO1 VCC LIO2 DISS X0 X1 X2 X3 X4 XTAL1 200 6 5 7
2
TIP0
11
RING0
XTAL_OUT XTAL2 1UF 10NF INT2095_0 CLK_EN 15.36MHz
1M
5PF RESETB
5PF
2 INT2095's applied in NT (IOM2)-Mode
March, 2001
INT2095
Contact Information
World Headquarters:
Intronic Semiconductor, Inc. 15, rue Buteau, Suite 230 Hull, Quebec J8Z1V4 Canada Telephone: 819-770-1468 http://www.intronicsemi.com
USA Sales:
e-rep, Inc. 1762 Technology Drive, Suite 204 San Jose, CA 95110 USA Telephone: 408-327-0540 http://www.e-rep.com
European Sales:
Hake-Mechatronik Meisenweg 3, 71691 Freiberg, Germany Telephone +49 (7141) 2 98 59 82 http://www.rainer-hake.de
March, 2001

▲Up To Search▲

Price & Availability of INT2095

	To Download INT2095 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .