View HO4001-1_1250926.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Preliminary
HO4001-1
* * * SAW Frequency Stabilization Fundamental-Mode Oscillation at 1000.0 MHz A Rugged, Compact General-Purpose Oscillator
The frequency of this oscillator is stabilized by surface-acoustic-wave (SAW) technology. This results in excellent performance from a compact, rugged, oscillator operating at the fundamental frequency of 1000.0 MHz. The highly-reliable HO4001-1 makes it suitable for general purpose use in a wide variety of applications
1000.0 MHz SAW Oscillator
Dip 16-8 Case
Characteristic Operating Frequency Absolute Frequency Tune Range Tune Voltage Tuning Linearity RF Output Power Discrete Spurious Second Harmonics Third and Higher Harmonics Nonharmonic SSB Phase Noise 1 kHz Offset 10 kHz Offset RF Impedance DC Power Supply 100kHz Offset Nominal Impedance Operating Load VSWR Operating Voltage Operating Current Operating Ambient Temperature Lid Symbolization (YY=Year, WW=Week) ZO GL VCC ICC TA 3, 6 -20 RFM HO4001-1 YYWW 2, 3, 4 2, 3, 4 -80 -100 -130 -150 50 4.75 2:1 5.25 45 +70 -95 -125 dBc/Hz VDC mA C PO 3, 6 +7 Sym fO 1, 7 999.850 0 3:1 +10 -15 -20 dBc Notes Minimum Typical 1000.0 Maximum 1000.150 +5 4:1 dBm Units MHz MHz VDC
3 3, 5 3, 6
5.0
BLOCK DIAGRAM CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. COCOM CAUTION: Approval by the U.S. Department of Commerce is required prior to export of this device. Notes:
1. 2. 3. 4. One or more of the following United States patents apply: 4,616,197; 4,610,681; and 4,761,616. Unless noted otherwise, all specifications are listed at TA = +25C 2C, VCC = nominal voltage 0.01 VDC, and load impedance = 50 with VSWR 1.5:1. The design, manufacturing process , and specification of this device are subject to change without notice. Applies to oscillator only and not to sidebands caused by external electrical or mechanical sources. (Dedicated external voltage regulation with low-frequency filtering for the DC power supply and proper circuit board layout are recommended for optimum spectral purity.) For specified maximum operating load VSWR (any angle) at FO. (No instability or damage will occur for any passive load impedance.) For any combination of VCC and TA within the specified operating ranges. Applies for any combination of Note 5 and 6 conditions.
RF OUTPUT SAW Oscillator Buffer Amplifier V CC
ELECTRICAL CONNECTIONS
VCC 1 Case Ground 2 V tune 15 Case Ground
Top View
5. 6. 7.
Case Ground 7 RF Output 8
10 Case Ground 9 VCC
RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: info@rfm.com http://www.rfm.com HO4001-1-062001
Page 1 of 2
1000.0 MHz
DIP16-8
SAW Oscillator
Metal Dual-Inline Package with 8 leads in a 16-lead DIP configuration
mm Dimension MIN A B C D E F G H K L M N R -- -- -- 0.40 MAX 25.02 12.83 6.35 0.51 MIN -- -- -- 0.016
Inches MAX 0.985 0.505 0.250 0.020
0.64 Nominal 7.62 Nominal 2.54 Nominal 17.78 Nominal 3,39 1.30 -- -- 1.75 6.73 -- 11.18 22.60 2.26
0.025 Nominal 0.300 Nominal 0.100 Nominal 0.700 Nominal 0.130 0.051 -- -- 0.069 0.265 -- 0.440 0.890 0.089
Top View
B M C K
Bottom View
(4 Places)
F R
(3 Places) 8 7 9 10
L
A
N
2 1 15 16
H G
(4 Places)
D
Pin 1 Mark (Optional)
E
(8 Places)
RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: info@rfm.com http://www.rfm.com HO4001-1-062001
Page 2 of 2

▲Up To Search▲

Price & Availability of HO4001-1

	To Download HO4001-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .