View C850-6_1223791.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Technical Data Sheet
AMICON(R) C 850-6
Internet Address: www.emersoncuming.com
Silver Filled, Epoxy Die Attach Adhesive
Instructions For Use: Thoroughly read the information concerning health and safety contained in this bulletin before using. Observe all precautionary statements that appear on the product label and/or contained in individual Material Safety Data Sheets (MSDS). To ensure the long term performance of the bonded assembly, complete cleaning of the substrates should be performed to remove contamination such as oxide layers, dust, moisture, salt, and oils which can cause poor adhesion or corrosion in a bonded part. For information on proper substrate preparation, refer to the reprint "Good Adhesive Bonding Starts With Surface Preparation" available from Emerson & Cuming. Some filler settling is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use. Power mixing is preferred to ensure a homogeneous product. Apply the adhesive to all surfaces to be bonded and join together. In most applications only contact pressure is required.
Key Feature: * One component * Silver filled * Low viscosity
Benefit: * Ease of use * Yields excellent electrical and thermal conductivities Reduces tailing and stringing in production equipment
Product Description: AMICON C 850-6 is a fast curing, one component, low viscosity, silver filled epoxy die attach adhesive. It features high electrical and thermal conductivity and high strength at wire bond temperatures. AMICON C 850-6 also features a low viscosity to avoid tailing, stringing and dry out problems in high speed die attach equipment. Applications: AMICON C 850-6 is designed for bonding most plastic packaged ICs and other die attach applications.
Properties of Material As Supplied: Property Chemical Type Appearance Density Brookfield Viscosity Test Method Visual ASTM-D-792 ASTM-D-2393 5 rpm # TC Unit
3
g/cm Pa.s cP
Value Silver filled epoxy Silver paste 3.2 75 - 125 75,000 - 125,000
Cure Schedule: Cure at any one of the recommended cure schedules. For optimum performance, follow the initial cure with a post cure of 1-2 hours at the highest expected use temperature. Alternate cure schedules may also be possible. Contact your Emerson & Cuming Technical Representative for further information.
Temperature C 125 150 250
Cure Time Time (minutes) 60 30 1
"Our service engineers are available to help purchasers obtain best results from our products, and recommendations are based on tests and information believed to be reliable. However, we have no control over the conditions under which our products are transported to, stored, handled, or used by purchasers and, in any event, all recommendations and sales are made on condition that we will not be held liable for any damages resulting from their use. No representative of ours has any authority to waive or change this provision. We also expect purchasers to use our products in accordance with the guiding principles of the Chemical Manufacturers Association's Responsible Care(R) program."
AMICON C 850-6
(R)
Properties of Material After Application: Property Die Shear Test (47 X 50 mil die) Temperature Range of Use Volume Resistivity @ 25C Test Method TP 102* ASTM-D-257 Unit kg C Ohm-cm Value 1.6 minimum -40 to +125 0.001 maximum
*"TP"s are internal test procedures, typically derived from ASTM or other norms. Copies of these test procedures can be obtained upon request.
Storage and Handling: The shelf life of AMICON C 850-6 is 6 months at 0C. For best results, store in original, tightly covered containers. Storage in cool, clean and dry areas is recommended. Usable shelf life may vary depending on method of application and storage temperature. Health and Safety: The AMICON C 850-6, like most epoxy compounds, possesses the ability to cause skin and eye irritation upon contact. Certain individuals may also develop an allergic reaction after exposure (skin contact, inhalation of vapors, etc.) which may manifest itself in a number of ways including skin rashes and an itching sensation. Handling this product at elevated temperatures may also generate vapors irritating to the respiratory system. Good industrial hygiene and safety practices should be followed when handling this product. Proper eye protection and appropriate chemical resistant clothing should be worn to minimize direct contact. Consult the Material Safety Data Sheet (MSDS) for detailed recommendations on the use of engineering controls and personal protective equipment.
NATIONAL STARCH MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, CONCERNlNG THE SUITABILITY OF THESE MATERIALS FOR USE IN IMPLANTATION IN THE HUMAN BODY OR FOR ANY OTHER USE. These materials are not designed or manufactured for use in implantation in the human. National Starch has not performed clinical testing of these materials for implantation. National Starch has neither sought, nor received, approval from the FDA for the use of these materials in implantation in the human body. This information is only a brief summary of the available safety and health data. Thoroughly review the MSDS for more complete information before using this product. Attention Specification Writers: The values contained herein are considered typical properties only and are not intended to be used as specification limits. For assistance in preparing specifications, please contact Emerson & Cuming Quality Assurance for further details.
(AMICON(R) is a registered trademark of Millipore Corp.)
Underfills
Solder Alternatives
C.O.B. Materials
Encapsulants
Coatings
Adhesives
Film Adhesives
Thermal Interfaces
Electrically Conductive Coatings and Adhesives
Europe Nijverheidsstraat 7 B-2260 Westerlo Belgium ! : +(32)-(0) 14 57 56 11 Fax: +(32)-(0) 14 58 55 30
North America 46 Manning Road Billerica, MA 01821 ! : 978-436-9700 Fax : 978-436-9701
Asia-Pacific 100 Kaneda, Atsugi-shi Kanagawa-ken, 243-0807 Japan ! : (81) 46-225-8815 Fax : (81) 46-222-1347
(c) 2000 Emerson & Cuming 1755-C-850-6/09-00

▲Up To Search▲

Price & Availability of C850-6

	To Download C850-6 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .