 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| C5430 Typical Applications 2, 5, 10 Gbit/s standard Sonet / SDH VCXO Dual Output Features Surface Mount Package Reflow Process Compatible Crystal-based Oscillator Output Frequency Range Frequencies 155.52 to 670MHz 622.08 & 624.694 MHz 622.08 & 669.326 MHz 155.52 & 166.628 MHz Frequency stabilities 1 Parameter Overall (vs. initial, vs. operating temperature range, vs. supply voltage change, vs. load change, vs. 15 years aging) vs. supply voltage change vs. load change vs. activity dips Min -40.0 -1.0 -1.0 -1.0 Typ Max. +40.0 +1.0 +1.0 +1.0 Units ppm ppm ppm ppm Operating temp range -5 ... +70C Ordering Code 5 Vs 5% load 10% Supply voltage Parameter Supply voltage (Vs) Current consumption Min 3.135 Typ 3.3 Max. 3.465 120 Units VDC mA Condition Ordering Code SV033 @ LVPECL (no load) 5 RF output Parameter Signal Load Rise and Fall time Duty cycle Min Typ PECL 50 Max. Units ps % Condition Ordering Code5 RFP Vs - 2V 20 to 80 % 45 800 55 Frequency Tuning (EFC) Parameter Tuning Range Absolute Pulling Range (APR) Linearity Tuning Slope Control Voltage Range Control Input Impedance Modulation Bandwith Min 50 10 Positive 0.3 20 0 1.65 3.0 20 VDC k kHz with Vs=3.3 VDC Related to 1 kHz Typ 90.0 Max. Units ppm ppm % Condition Additional parameters Parameter Phase Noise Jitter Weight Processing & Packing Min Typ -120 1 4 handling&processing note Max. Units dBc/Hz ps RMS g Condition 10 kHz @666 MHz @ 12 kHz to 20 MHz Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 W atts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2005-10-28 * page 1 of 5 Vectron Asia Pacific Sales Office 1F-2F, No 8 W orkshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C5430 Enclosures Type G194 Code A1 Height "H" 5,9 Pin Length "L" NA VCXO Dual Output Dimensions: mm Pin Connections 1 Control Voltage (Vc) 2 Frequency select f1/f2 6 Enable / Disable 7 8 9 13 14 Ground (Case) RF Output Complementary RF Output N/C Supply Voltage Input (Vs) Outline Drawing: G194 Marking C5430A1-xxxx 622M08/624M694 * VI AYYWW Low (0) = 622.08 Mhz High (1) = 624.494 MHz Low (0) = Enable High (1) = Disable Absolute Maximum Ratings Parameter Supply voltage (Vs) Operable temperature range Storage temperature range Min -40 -40 Typ Max. 7 +85 +90 Units V C C Condition Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 W atts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2005-10-28 * page 2 of 5 Vectron Asia Pacific Sales Office 1F-2F, No 8 W orkshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C5430 Standard Shipping Method A X B P Enclosure Type G194 *bei W 24 mm nur untere Lochreihe by W 24 mm only lower hole line Lage im Gurt Position in tape Pin 1 VCXO Dual Output Abwickelrichtung Unwinding direction K Gurtunterseite Tape buttom side Gurtoberseite Tape upper side Tape width W [mm] TBD Quantity per meter TBD Quantity per reel TBD Dimension P TBD Production tolerance complying DIN IEC 286-3 Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 W atts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2005-10-28 * page 3 of 5 Vectron Asia Pacific Sales Office 1F-2F, No 8 W orkshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C5430 Recommended Reflow Profile tp VCXO Dual Output Tp Ramp up Ts Critical Zone TL to Tp TL Temperature tL Ramp dow n Ts ts preheat 25 t 25C to peak Time Profile Feature Average ramp-up rate (TL to Tp) Preheat -Temperature Min Ts min) -Temperature Min Ts max ) -Time (min to max) (ts) Ts max to TL - Ramp-up Rate Time maintainted above - Temperature (TL) - Time (tL) Peak Temperature (Tp) Time within 5C of actual Peak Temperature (tp) Ramp-down Rate Time 25C to Peak Temperature Pb-Free Assembly/Sn-Pb Assembly 3C/second max. 150c 200c 60-180 seconds 3C/second max. 217C 60-150 seconds max 260C 20-40 seconds 6C/second max. 8 minutes max. SMD oscillators must be on the top side of the PCB during the reflow process. Note: All temperatures refer to topside of the package, measured on the package body surface. Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 W atts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2005-10-28 * page 4 of 5 Vectron Asia Pacific Sales Office 1F-2F, No 8 W orkshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C5430 How to Order this Product: Step 1 Use this worksheet to forward the following information to your factory representative: Model C5430 Example: C5430 SV033 RFP VCXO Dual Output Stability Code Supply Voltage Code RF Output Code Package Code A1 Step 2 The factory representative will then respond with a Vectron Model Number in the following Configuration: Model C5430 Package Code [Customer Specified Package Code] Dash Dash Number [Factory Generated 4 digit number] Typical P/N = C5430A1-0001 Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C) 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 W atts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2005-10-28 * page 5 of 5 Vectron Asia Pacific Sales Office 1F-2F, No 8 W orkshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax |
Price & Availability of C5430
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |