 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| BTA208X-1000C Three quadrant triacs high commutation Rev. 01 -- 4 October 2005 SOT Product data sheet 1. Product profile 1.1 General description Passivated high voltage, high commutation triac in a full pack, plastic package. This triac is intended for use in motor control circuits where high blocking voltage, high static and dynamic dV/dt as well as high dI/dt can occur. This device will commutate the full rated RMS current at the maximum rated junction temperature, without the aid of a snubber. 1.2 Features s False trigger immunity s 1000 V VDRM guaranteed s Isolated package 1.3 Applications s Motor control s Reversible induction motors 1.4 Quick reference data s ITSM 65 A s VDRM 1000 V s IT(RMS) 8 A s IGT 35 mA 2. Pinning information Table 1: Pin 1 2 3 mb Pinning Description main terminal 1 (T1) main terminal 2 (T2) gate (G) mounting base; isolated mb T2 sym051 Simplified outline Symbol T1 G 123 SOT186A (3-lead TO-220F) Philips Semiconductors BTA208X-1000C Three quadrant triacs high commutation 3. Ordering information Table 2: Ordering information Package Name BTA208X-1000C TO-220F Description plastic single-ended package; isolated heatsink mounted; 1 mounting hole; 3-lead TO-220 `full pack' Version SOT186A Type number 4. Limiting values Table 3: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VDRM IT(RMS) ITSM Parameter repetitive peak off-state voltage RMS on-state current non-repetitive peak on-state current full sine wave; Th 73 C; see Figure 4 and 5 full sine wave; Tj = 25 C prior to surge; see Figure 2 and 3 t = 20 ms t = 16.7 ms I2t dlT/dt IGM PGM PG(AV) Tstg Tj I2t for fusing rate of rise of on-state current peak gate current peak gate power average gate power storage temperature junction temperature over any 20 ms period t = 10 ms ITM = 12 A; IG = 0.2 A; dIG/dt = 0.2 A/s -40 65 71 21 100 2 5 0.5 +150 125 A A A2s A/s A W W C C Conditions Min Max 1000 8 Unit V A BTA208X-1000C_1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 4 October 2005 2 of 12 Philips Semiconductors BTA208X-1000C Three quadrant triacs high commutation 12 Ptot (W) 10 003aaa967 = 180 120 90 60 30 71 Th(max) (C) 80 8 89 6 98 4 107 2 116 0 0 2 4 6 8 IT(RMS) (A) 125 10 = conduction angle Fig 1. Total power dissipation as a function of RMS on-state current; maximum values 003aaa968 80 ITSM (A) 60 IT ITSM t tp Tj = 25 C max 40 20 0 1 10 102 n 103 f = 50 Hz Fig 2. Non-repetitive peak on-state current as a function of the number of sinusoidal current cycles; maximum values BTA208X-1000C_1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 4 October 2005 3 of 12 Philips Semiconductors BTA208X-1000C Three quadrant triacs high commutation 103 dlT/dt limit ITSM (A) IT 003aab121 ITSM t T Tj(init) = 25 C max 102 10 10-2 10-1 1 10 tp (ms) 102 Fig 3. Non-repetitive peak on-state current as a function of pulse width; maximum values 003aaa970 003aaa969 25 IT(RMS) (A) 20 10 IT(RMS) (A) 8 73 C 15 6 10 4 5 2 0 10-2 10-1 1 10 surge duration (s) 0 -50 0 50 100 Th (C) 150 f = 50 Hz; Th 73 C Fig 4. RMS on-state current as a function of surge duration; maximum values Fig 5. RMS on-state current as a function of heatsink temperature; maximum values BTA208X-1000C_1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 4 October 2005 4 of 12 Philips Semiconductors BTA208X-1000C Three quadrant triacs high commutation 5. Thermal characteristics Table 4: Symbol Rth(j-h) Rth(j-a) Thermal characteristics Parameter Conditions [1] [2] Min - Typ 55 Max 4.5 6.5 - Unit K/W K/W K/W thermal resistance from junction to see Figure 6 heatsink see Figure 6 thermal resistance from junction to in free air ambient [1] [2] Full or half cycle; with heatsink compound. Full or half cycle; without heatsink compound. 10 Zth(j-h) (K/W) 1 (1) (2) 003aaa972 (3) (4) 10-1 PD tp t 10-2 10-5 10-4 10-3 10-2 10-1 1 tp (s) 10 (1) Unidirectional without heatsink compound (2) Unidirectional with heatsink compound (3) Bidirectional without heatsink compound (4) Bidirectional with heatsink compound Fig 6. Transient thermal impedance from junction to heatsink as a function of pulse width 6. Isolation characteristics Table 5: Isolation limiting values and characteristics Th = 25 C unless otherwise specified Symbol Visol(rms) Parameter RMS isolation voltage Conditions f = 50 Hz to 60 Hz; sinusoidal waveform; RH 65 %; clean and dust free; from all three terminals to external heatsink f = 1 MHz; from pin 2 to external heatsink Min Typ Max 2500 Unit V Cisol isolation capacitance - 10 - pF BTA208X-1000C_1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 4 October 2005 5 of 12 Philips Semiconductors BTA208X-1000C Three quadrant triacs high commutation 7. Characteristics Table 6: Characteristics Tj = 25 C unless otherwise specified. Symbol IGT Parameter gate trigger current Conditions VD = 12 V; IT = 0.1 A; see Figure 8 T2+ G+ T2+ G- T2- G- IL latching current VD = 12 V; IGT = 0.1 A; see Figure 10 T2+ G+ T2+ G- T2- G- IH VT VGT ID dVD/dt holding current on-state voltage gate trigger voltage off-state current VD = 12 V; IGT = 0.1 A; see Figure 11 IT = 10 A; see Figure 9 VD = 12 V; IT = 0.1 A; see Figure 7 VD = 400 V; IT = 0.1 A; Tj = 125 C VD = VDRM(max); Tj = 125 C Dynamic characteristics rate of rise of off-state VDM = 67 % VDRM(max); voltage Tj = 125 C; exponential waveform; gate open circuit rate of change of commutating current gate-controlled turn-on time VDM = 400 V; Tj = 125 C; IT(RMS) = 8 A; without snubber; gate open circuit; see Figure 12 ITM = 12 A; VD = VDRM(max); IG = 0.1 A; dIG/dt = 5 A/s 1000 4000 V/s 0.25 25 48 30 20 1.3 0.7 0.4 0.1 50 75 50 50 1.65 1.5 0.5 mA mA mA mA V V V mA [1] Min Typ Max Unit Static characteristics 2 2 2 6 13 23 35 35 35 mA mA mA dIcom/dt 12 32 - A/ms tgt - 2 - s [1] Device will not trigger in the T2- G+ quadrant. BTA208X-1000C_1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 4 October 2005 6 of 12 Philips Semiconductors BTA208X-1000C Three quadrant triacs high commutation 1.6 VGT(Tj) VGT(25C) 1.2 001aab101 3 (1) 001aac669 IGT (Tj) IGT (25C) 2 (2) (3) 0.8 1 0.4 -50 0 50 100 Tj (C) 150 0 -50 0 50 100 Tj (C) 150 (1) T2- G- (2) T2+ G- (3) T2+ G+ Fig 7. Normalized gate trigger voltage as a function of junction temperature 003aaa971 Fig 8. Normalized gate trigger current as a function of junction temperature 3 IL(Tj) IL(25C) 2 001aab100 25 IT (A) 20 15 10 1 5 (1) (2) (3) 0 0 1 2 VT (V) 3 0 -50 0 50 100 Tj (C) 150 Vo = 1.22 V; RS = 0.04 (1) Tj = 125 C; typical values (2) Tj = 125 C; maximum values (3) Tj = 25 C; maximum values Fig 9. On-state current as a function of on-state voltage Fig 10. Normalized latching current as a function of junction temperature BTA208X-1000C_1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 4 October 2005 7 of 12 Philips Semiconductors BTA208X-1000C Three quadrant triacs high commutation 3 IH(Tj) IH(25C) 2 001aab099 103 dIcom/dt (A/ms) 102 typ min 003aaa973 1 10 0 -50 1 0 50 100 Tj (C) 150 20 60 100 Tj (C) 140 Fig 11. Normalized holding current as a function of junction temperature Fig 12. Rate of change of commutating current as a function of junction temperature; typical and minimum values BTA208X-1000C_1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 4 October 2005 8 of 12 Philips Semiconductors BTA208X-1000C Three quadrant triacs high commutation 8. Package outline Plastic single-ended package; isolated heatsink mounted; 1 mounting hole; 3 lead TO-220 'full pack' SOT186A E P q D1 T mounting base A A1 D j L2 b1 L b2 L1 K Q 1 2 b e e1 3 wM c 0 5 scale 10 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 4.6 4.0 A1 2.9 2.5 b 0.9 0.7 b1 1.1 0.9 b2 1.4 1.0 c 0.7 0.4 D 15.8 15.2 D1 6.5 6.3 E 10.3 9.7 e 2.54 e1 5.08 j 2.7 1.7 K 0.6 0.4 L L1 L2 max. 3 (1) P 3.2 3.0 Q 2.6 2.3 q 3.0 2.6 T (2) w 0.4 14.4 3.30 13.5 2.79 2.5 Notes 1. Terminal dimensions within this zone are uncontrolled. Terminals in this zone are not tinned. 2. Both recesses are 2.5 x 0.8 max. depth OUTLINE VERSION SOT186A REFERENCES IEC JEDEC 3-lead TO-220F JEITA EUROPEAN PROJECTION ISSUE DATE 02-03-12 02-04-09 Fig 13. Package outline SOT186A (3-lead TO-220F) BTA208X-1000C_1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 4 October 2005 9 of 12 Philips Semiconductors BTA208X-1000C Three quadrant triacs high commutation 9. Revision history Table 7: Revision history Release date 20051004 Data sheet status Change notice Product data sheet Doc. number Supersedes Document ID BTA208X-1000C_1 BTA208X-1000C_1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 4 October 2005 10 of 12 Philips Semiconductors BTA208X-1000C Three quadrant triacs high commutation 10. Data sheet status Level I II Data sheet status [1] Objective data Preliminary data Product status [2] [3] Development Qualification Definition This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). III Product data Production [1] [2] [3] Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 11. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 13. Trademarks Notice -- All referenced brands, product names, service names and trademarks are the property of their respective owners. 12. Disclaimers Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors 14. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com BTA208X-1000C_1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 4 October 2005 11 of 12 Philips Semiconductors BTA208X-1000C Three quadrant triacs high commutation 15. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics. . . . . . . . . . . . . . . . . . . 5 Isolation characteristics . . . . . . . . . . . . . . . . . . 5 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Contact information . . . . . . . . . . . . . . . . . . . . 11 (c) Koninklijke Philips Electronics N.V. 2005 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 4 October 2005 Document number: BTA208X-1000C_1 Published in The Netherlands |
Price & Availability of BTA208X-1000C
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |