|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
BD243C BD244C COMPLEMENTARY SILICON POWER TRANSISTOR Features STmicroelectronics PREFERRED SALESTYPES Applications SWITCHING APPLICATIONS LINEAR APPLICATIONS 1 2 3 Description The BD243C device is a silicon Epitaxial-Base NPN transistor mounted in Jedec TO-220 plastic package. It's intend for use in medium power linear and switching applications. The complementary PNP type is BD244C. TO-220 Internal Schematic Diagram Order Codes Part Number BD243C BD244C Marking BD243C BD244C Package TO-220 TO-220 Packing TUBE TUBE September 2005 Rev 4 1/8 www.st.com 8 1 Absolute Maximum Ratings BD243C - BD244C 1 Table 1. Symbol Absolute Maximum Ratings Absolute Maximum Rating Parameter Value BD243C (NPN) VCBO VCEO VEBO IC ICM IB PTOT TSTG TJ Collector-Base Voltage (IE = 0) Collector-Emitter Voltage (IB = 0) Collector-Base Voltage (IC = 0) Collector Current Collector Peak Current Base Current Total dissipation at Tc = 25C Storage Temperature Max. Operating Junction Temperature 100 100 5 6 10 2 65 -65 to 150 150 BD244C (PNP) V V V A A A W C C Unit For PNP types voltage and current values are negative 2/8 BD243C - BD244C 2 Electrical Characteristics 2 Table 2. Symbol ICES ICEO IEBO Electrical Characteristics Electrical Characteristics (TCASE = 25C; unless otherwise specified) Parameter Collector Cut-off Current (V BE = 0) Collector Cut-off Current (IB = 0) Emitter Cut-off Current (IC = 0) Test Conditions VCE = rated VCEO VCE = 60 V VEB = 5 V Min. Typ. Max. 0.4 0.7 1 Unit mA A mA Collector-Emitter Sustaining VCEO(sus) Voltage Note 1 (IB = 0 ) VCE(sat) Note 1 VBE Note 1 hFE Note 1 hfe Collector-Emitter Saturation Voltage Base-Emitter Voltage IC = 30 mA 100 V IC = 6 A IC = 6 A IC = 0.3 mA IC = 3 A IB = 1 A IB = 1 A V CE = 4 V VCE = 4 V 30 15 3 20 1.5 2 V V DC Current Gain Small Signal Current Gain IC = 0.5 A V CE = 10 V f = 1MHz IC = 0.5 A VCE = 4 V f = 1MHz Note: 1 Pulsed duration = 300 s, duty cycle 2%. For PNP types voltage and current values are negative 3/8 2 Electrical Characteristics BD243C - BD244C 2.1 Typical characteristics Safe Operating Area Figure 1. 4/8 BD243C - BD244C 3 Package Mechanical Data 3 Package Mechanical Data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 5/8 3 Package Mechanical Data BD243C - BD244C TO-220 MECHANICAL DATA DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154 oP Q 6/8 BD243C - BD244C 4 Revision History 4 Revision History Date 13-Sep-2005 Revision 4 Changes New datasheet according to MLD-PWR/05/1267 New template 7/8 4 Revision History BD243C - BD244C Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners (c) 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 8/8 |
Price & Availability of BD244C |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |