|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Microwave Ceramics and Modules 2 Pole Filter for W-LAN 5GHz / [5.725-5.875] Band Preliminary Data Sheet Filter B69842N5807A150 Features SMD filter consisting of coupled resonators with stepped impedances MgTiO3 - CaTiO3 (r = 21 / TCf =010 ppm/K) with a coating of copper (10m) and tin (>5m) Excellent reflow solderability, no migration effect due to copper/tin metallization Index Page 2 Component drawing Recommended footprint Page 3 Characteristics Maximum ratings Typical passband characteristic Page 4 Broadband characteristic Processing information Soldering requirements Page 5 Delivery mode ISSUE DATE 19.03.04 ISSUE P2 PUBLISHER SAW MWC PD PAGE 1/5 Microwave Ceramics and Modules 2 Pole Filter for W-LAN 5GHz / [5.725-5.875] Band Preliminary Data Sheet Component drawing Filter B69842N5807A150 View from below onto the solder terminals and view from beside Recommended footprint Soldered Pads. I/O Pads must be connected to 50 ohms impedance lines. ground covered with solder resist. It must be connected to groung plane below by vias Max diameter: 0.3 mm Max via pitch:1 mm ISSUE DATE 19.03.04 ISSUE P2 PUBLISHER SAW MWC PD PAGE 2/5 Microwave Ceramics and Modules 2 Pole Filter for W-LAN 5GHz / [5.725-5.875] Band Preliminary Data Sheet Characteristics min. Center frequency Insertion loss Passband Standing wave ratio Impedance Power Attenuation fc IL B 150 SWR Z P typ. 5.8 1.1 Filter B69842N5807A150 max. 1.3 GHz dB MHz 1.5 50 2.0 1.0 W dB dB dB dB dB dB at DC to 1990 MHz at 3300 MHz at 5000 MHz at 5425 MHZ at 6175 MHz at 6800 MHz 55 40 40 12 8 25 60 46 45 15 12 27 Maximum ratings IEC climatic category (IEC 68-1) Operating temperature Typical passband characteristic - 40/+ 90/56 Top -40 / + 85 C 0 -10 -20 [dB] S11 [dB] S21 [dB] -30 -40 -50 -60 4,0 4,2 4,4 4,6 4,8 5,0 5,2 5,4 5,6 5,8 Frequency [GHz] ISSUE DATE 19.03.04 ISSUE P2 PUBLISHER SAW MWC PD 6,0 PAGE 3/5 Microwave Ceramics and Modules 2 Pole Filter for W-LAN 5GHz / [5.725-5.875] Band Preliminary Data Sheet Broadband characteristic Epcos B69842N5777A100 upperharmonics Filter B69842N5807A150 0 -10 -20 Att [dB] -30 S21[dB] -40 -50 -60 10,0 11,0 12,0 13,0 14,0 15,0 16,0 17,0 18,0 19,0 20,0 30 sec. 2.5 C/s 2-3 min. freq [GHz] Processing information Wettability acc. to IEC 68-2-58: 75% (after aging) Soldering requirements Profile for eutectic SnPb solder paste Soldering type reflow Maximum soldering temperature 235 (max. 2 sec.) (measuring point on top surface of the component) 225 (max. 10 sec.) Recommended soldering conditions (infrared): Temp. [C] within 10 sec. Profile for leadfree solder paste reflow 260 (max. 2 sec.) C 250 (max. 10 sec.) C Temp. [C] 215C10C 21,0 within 10 sec. 245C5C Time [sec.] > - 5 C/s 1,0 2,0 3,0 4,0 5,0 6,0 7,0 8,0 20-40 sec. 40-80 sec. 9,0 Time [sec.] ISSUE DATE 19.03.04 ISSUE P2 PUBLISHER SAW MWC PD PAGE 4/5 Microwave Ceramics and Modules 2 Pole Filter for W-LAN 5GHz / [5.725-5.875] Band Preliminary Data Sheet Filter B69842N5807A150 Delivery mode Blister tape acc. to IEC 286-3, PS, grey Pieces/tape: 4000 EPCOS AG 2001. All Rights Reserved. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. The information contained in this data sheet describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed. ISSUE DATE 19.03.04 ISSUE P2 PUBLISHER SAW MWC PD PAGE 5/5 |
Price & Availability of B69842N5807A150 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |