Part Number Hot Search : 
2SA1452 B8806 00206 SBU58111 4435A 00206 KS8245A1 100110
Product Description
Full Text Search
 

To Download AQT104 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 AQT104
Quik LDO
2.5V or Adjustable, No Output Cap, Low Dropout Regulator
Preliminary Design Specification General Description
The Quik LDOTM AQT104 is a low dropout regulator that requires no external output capacitor for stability and it is stable with any capacitive load. It offers 0.5 Ohms pass device with 500mA load current. Its output voltage is preset to values between 2V and 3.3V with 1% accuracy and presents very good line and load regulation. It also includes output current limit with foldback characteristic and thermal shutdown. The removal of the output capacitor allows cost and board space reduction along with energy saving at power on and off. It is best suited for battery-powered equipments and in particular for cellular phones.
Revision 0.5, May 2, 2003 Applications
* * * * * * * * * * * * * *
Cordless and cellular phones Medical equipment PDAs and battery-powered equipments
Features
No need for output capacitor 500mA output current 150mV drop at 300mA Preset output voltages (1% accuracy) Low current consumption Foldback output current limitation Thermal Shutdown Excellent load and line regulation Low noise Fast turn on and off SOT23 package
Block Diagram
Pin Configuration
Quik LDOTM technology is patent pending. Quik LDOTM is a trademark of Acutechnology Semiconductor Inc. Quik LDOTM is not a typo - with a Quik LDOTM you eliminate a "C".
Acutechnology Semiconductor Inc.
www.acutechnology.com
Acutechnology Semiconductor Inc.
AQT104 Quik LDOTM
Pin Description
Pin 1 2 3 4 5 Pin Name VIN GND ENABLE ADJ/CBY VOUT Function Regulator Input. Ground Enable Output voltage adjust Regulator output
Absolute Maximum Ratings
VIN Voltage ................................................ 7V VIN Current............................................... 1A Operating Junction Temperature ............... 150C Lead Temperature (soldering 10 seconds). 260C Storage Temperature Range ...................... -65C to +150C
Electrical Specifications
Electrical characteristics are guaranteed by design over the full temperature range -40C Input Voltage Ground Current Current Limit Ta=25C Output Voltage Accuracy 1 550
Conditions
Min
2
Typ
Max
6
Units
V mA mA %
0.1 700
0.2 850 1.5 2.5
Over Temperature
Line regulation Load Regulation Thermal Shut-down Temperature Thermal Shut down Hysteresis Dropout Voltage Reference Power Supply Rejection Output Voltage Noise EN Input Low Voltage EN Input High Voltage Shutdown Current Vin=5V EN=0V 2 10 Iout=300mA Freq.=120Hz f=10Hz to 100KHz (no caps) Vout=2.5V VIN=(Vout+0.1V) to 6V Iout=20mA Iout=1 mA to 500mA 1.5 5 160 20 150 60 150
3 10
mV mV
C
180
mV
dB uVrms 0.8 V V 300
nA
Acutechnology Semiconductor Inc. Preliminary Design Specification
AQT104 Rev 05, May 2, 2003
www.acutechnology.com Page 2 of 4
Acutechnology Semiconductor Inc.
AQT104 Quik LDOTM
Typical Response
2.62
2.58
OUT / V
2.54
2.5
2.46
2.42
Output current / mA
450
350
250
150
50 0
100
200
300
400
500
600
Time/Secs
100Secs/div
Load transient (current step=500mA). No output capacitor!!
Enable signal / V
4.5
3.5
2.5
1.5
0.5
2.5
2
OUT / V
1.5
1
0.5
00
100
200
300
400
500
600
Time/Sec s
100Sec s /div
Turn on and off transient response.
Acutechnology Semiconductor Inc. Preliminary Design Specification
AQT104 Rev 05, May 2, 2003
www.acutechnology.com Page 3 of 4
Acutechnology Semiconductor Inc.
AQT104 Quik LDOTM
Package Mechanical Details
SOT23-5 DIM
A A1 A2 b C D E E1 e e1 L a 0.10 0
Millimetres MIN
0.90 0.00 0.90 0.35 0.09 2.80 2.60 1.50 0.95 REF 1.90 REF 0.60 10 0.004 0
Inches MIN
0.035 0.00 0.035 0.014 0.0035 0.110 0.102 0.059 0.037 REF 0.075 REF 0.024 10
MAX
1.45 0.15 1.3 0.50 0.20 3.00 3.00 1.75
MAX
0.057 0.006 0.051 0.020 0.008 0.118 0.118 0.069
Contact information
Acutechnology Semiconductor Inc. 3487 McKee Rd. Suite 52 San Jose CA 95127 USA TEL:(408) 259-2300 (408) 259-3400 FAX:(408) 259-9160 e-mail:info@acutechnology.com
Acutechnology Semiconductor Inc. Preliminary Design Specification
AQT104 Rev 05, May 2, 2003
www.acutechnology.com Page 4 of 4


▲Up To Search▲   

 
Price & Availability of AQT104

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X