 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SUBMINIATURE SOLID STATE LAMP AM27SURC08 HYPER RED Features OSUBMINIATURE PACKAGE. OWIDE VIEWING ANGLE. OYOKE LEAD. Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. OLONG LIFE-SOLID STATE RELIABILITY. OLOW PACKAGE PROFILE. ORoHS COMPLIANT. OPACKAGE : 1000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAD1312 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/10/2005 DRAWN: S.H.CHEN PAGE: 1 OF 4 ERP:1202000389 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AM27SURC08 HYPER RED (InGaAlP) WATER CLEAR 280 Typ. 1000 Viewing Angle 2 1/2 20 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol peak D 1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Typ. 640 628 27 45 1.9 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Hyper Red 170 30 185 5 -40C To +85C Units mW mA mA V SPEC NO: DSAD1312 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/10/2005 DRAWN: S.H.CHEN PAGE: 2 OF 4 ERP:1202000389 Hyper Red AM27SURC08 SPEC NO: DSAD1312 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/10/2005 DRAWN: S.H.CHEN PAGE: 3 OF 4 ERP:1202000389 AM27SURC08 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAD1312 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/10/2005 DRAWN: S.H.CHEN PAGE: 4 OF 4 ERP:1202000389 |
Price & Availability of AM27SURC08
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |