 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 3.5x2.8 mm SMD CHIP LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA3528PR4S/Z WARM WHITE Features SINGLE COLOR. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. IDEAL FOR BACKLIGHTING. PACKAGE : 1500PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 5. RoHS COMPLIANT. Description The source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4522 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: W.J.HUA PAGE: 1 OF 7 ERP:1201002674 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Outside impact may scratch the silicone lens or damage the internal circuitry. 4. During surface-mounting, the pickup capillary diameter should be larger than the silicone lens to insure the capillary does not scratch or damage the lens. SPEC NO: DSAH4522 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: W.J.HUA PAGE: 2 OF 7 ERP:1201002674 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. AA3528PR4S/Z WARM WHITE (InGaN) WATER CLEAR 380 Typ. 620 Viewing Angle [1] 21/2 110 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol VF [1] IR X Chromaticity Coordinates Y C Capacitance Warm White Warm White 0.39 110 pF VF=0V;f=1MHz Parameter Forward Voltage Reverse Current Device Warm White Warm White 0.41 Typ. 3.2 Max. 3.7 10 Units V uA Test Conditions IF=20mA VR = 5V Note: 1. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Warm White 111 30 100 5 -40C To +85C Units mW mA mA V SPEC NO: DSAH4522 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: W.J.HUA PAGE: 3 OF 7 ERP:1201002674 Warm White AA3528PR4S/Z SPEC NO: DSAH4522 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: W.J.HUA PAGE: 4 OF 7 ERP:1201002674 AA3528PR4S/Z Warm White CIE 0.50 0.48 0.46 0.44 0.42 0.40 0.38 0.36 0.34 0.32 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.52 0.54 f2 d2 d0 d1 d3 f0 f1 d0 x y 0.361 0.385 0.3575 0.3612 0.3870 0.382 0.3942 0.4068 x y 0.3575 0.3612 d1 0.3545 0.3408 0.3800 0.358 0.3870 0.3820 Reference CCT : 4700~3900K d2 x y 0.3870 0.3820 0.4254 0.4044 0.4350 0.4260 0.3942 0.4068 x y Reference CCT : 4700~3900K d3 0.4254 0.4044 0.387 0.382 0.3800 0.358 0.4119 0.3730 Reference CCT : 3900~3200K f0 x y 0.435 0.426 0.4732 0.4398 0.4600 0.4152 0.4254 0.4044 x y Reference CCT : 3900~3200K f1 0.46 0.4152 0.4254 0.4044 0.4119 0.373 0.4440 0.3847 Reference CCT : 3200~2700K f2 x y 0.4732 0.4398 0.46 0.4152 0.4440 0.3847 0.4800 0.3960 0.5165 0.451 Reference CCT : 3200~2700K Reference CCT : 2700~2300K SPEC NO: DSAH4522 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: W.J.HUA PAGE: 5 OF 7 ERP:1201002674 AA3528PR4S/Z Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH4522 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: W.J.HUA PAGE: 6 OF 7 ERP:1201002674 PACKING & LABEL SPECIFICATIONS AA3528PR4S/Z SPEC NO: DSAH4522 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: W.J.HUA PAGE: 7 OF 7 ERP:1201002674 |
Price & Availability of AA3528PR4SZ
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |