 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 74LX1G14 LOW VOLTAGE CMOS SINGLE SCHMITT INVERTER WITH 5V TOLERANT INPUT s s s s s s s s s 5V TOLERANT INPUTS HIGH SPEED: tPD = 7.5ns (MAX.) at VCC = 3V LOW POWER DISSIPATION: ICC = 1A (MAX.) at TA = 25C TYPICAL HYSTERESIS: Vh=1V at VCC=4.5V POWER DOWN PROTECTION ON INPUTS AND OUTPUTS SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 24mA (MIN) at VCC = 3V BALANCED PROPAGATION DELAYS: tPLH tPHL OPERATING VOLTAGE RANGE: VCC(OPR) = 1.65V to 5.5V (1.2V Data Retention) IMPROVED LATCH-UP IMMUNITY SOT23-5L SOT323-5L ORDER CODES PACKAGE SOT23-5L SOT323-5L T&R 74LX1G14STR 74LX1G14CTR DESCRIPTION The 74LX1G14 is a low voltage CMOS SINGLE SCHMITT INVERTER fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for 1.65 to 5.5 VCC operations and low power and low noise applications. The internal circuit is composed of 3 stages including buffer output, which provide high noise immunity and stable output. Power down protection is provided on input and output and 0 to 7V can be accepted on inputs with PIN CONNECTION AND IEC LOGIC SYMBOLS no regard to the supply voltage. It can be interfaced to 5V signal environment for inputs in mixed 3.3/5V system. Pin configuration and function are the same as those of the 74LX1G04 but the 74LX1G14 has hysteresis. This together with its schmitt trigger function allows it to be used on line receivers with slow rise/fall input signals. The input is equipped with protection circuits against static discharge, giving it ESD immunity and transient excess voltage. December 2002 1/11 74LX1G14 INPUT AND OUTPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PIN No 1 2 4 3 5 SYMBOL NC 1A 1Y GND VCC NAME AND FUNCTION Not Connected Data Input Data Output Ground (0V) Positive Supply Voltage TRUTH TABLE A L H Y H L ABSOLUTE MAXIMUM RATINGS Symbol VCC VI VO VO IIK IOK IO Supply Voltage DC Input Voltage DC Output Voltage (VCC = 0V) DC Output Voltage (High or Low State) (note 1) DC Input Diode Current DC Output Diode Current (note 2) DC Output Current Parameter Value -0.5 to +7.0 -0.5 to +7.0 -0.5 to +7.0 -0.5 to VCC + 0.5 - 50 - 50 50 50 -65 to +150 300 Unit V V V V mA mA mA mA C C ICC or IGND DC VCC or Ground Current per Supply Pin Storage Temperature Tstg TL Lead Temperature (10 sec) Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. 1) Truth Table guaranteed: 1.2V to 3.6V 2) VIN from 0.8V to 2V at VCC = 3.0V 2/11 74LX1G14 RECOMMENDED OPERATING CONDITIONS Symbol VCC VI VO VO IOH, IOL IOH, IOL IOH, IOL IOH, IOL IOH, IOL Top Supply Voltage (note 1) Input Voltage Output Voltage (VCC = 0V) Output Voltage (High or Low State) High or Low Level Output Current (VCC = 4.5 to 5.5V) High or Low Level Output Current (VCC = 3.0 to 3.6V) High or Low Level Output Current (VCC = 2.7 to 3.0V) High or Low Level Output Current (VCC = 2.3 to 2.7V) High or Low Level Output Current (VCC = 1.65 to 2.3V) Operating Temperqture Parameter Value 1.65 to 5.5 0 to 5.5 0 to 5.5 0 to VCC 32 24 12 8 4 -55 to 125 Unit V V V V mA mA mA mA mA C 1) Truth Table guaranteed: 1.2V to 3.6V 2) VIN from 0.8V to 2V at VCC = 3.0V 3/11 74LX1G14 DC SPECIFICATIONS Test Condition Symbol Parameter VCC (V) 1.65 2.3 3 4.5 5.5 1.65 2.3 3 4.5 5.5 1.65 to 4.5 1.65 2.3 3.0 4.5 VOL Low Level Output Voltage 1.65 to 4.5 1.65 2.3 3.0 4.5 VH Hysteresis Voltage 1.65 2.3 3 4.5 5.5 1.65 to 5.5 0 1.65 to 5.5 VI = 0 to 5.5V VI or VO = 5.5V VI = VCC or GND IO=-100 A IO=-4 mA IO=-8 mA IO=-16 mA IO=-24 mA IO=-32 mA IO=100 A IO=4 mA IO=8 mA IO=16 mA IO=24 mA IO=32 mA 0.37 0.48 0.56 0.71 0.71 -40 to 85 C Min. 0.79 1.11 1.5 2.16 2.61 0.39 0.58 0.84 1.41 1.87 VCC-0.1 1.2 1.9 2.4 2.2 3.8 0.1 0.45 0.3 0.4 0.55 0.55 0.62 0.77 0.87 1.04 1.11 10 10 10 0.37 0.48 0.56 0.71 0.71 Max. 1.16 1.56 1.87 2.74 3.33 0.62 0.87 1.14 1.79 2.29 Value -55 to 125 C Min. 0.79 1.11 1.5 2.16 2.61 0.39 0.58 0.84 1.41 1.87 VCC-0.1 1.2 1.9 2.4 2.2 3.8 0.1 0.45 0.3 0.4 0.55 0.55 0.62 0.77 0.87 1.04 1.11 10 10 10 V V Max. 1.16 1.56 1.87 2.74 3.33 0.62 0.87 1.14 1.79 2.29 Unit VT+ Positive Input threshold V VT- Negative Input threshold V VOH High Level Output Voltage V II Ioff ICC Input Leakage Current Power Off Leakage Current Quiescent Supply Current A A A 4/11 74LX1G14 AC ELECTRICAL CHARACTERISTICS Test Condition Symbol Parameter VCC (V) 1.65 to 1.95 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 1.65 to 1.95 2.3 to 2.7 2.7 3.0 to 3.6 4.5 to 5.5 CL (pF) RL () ts = tr (ns) -40 to 85 C Min. 2 1 1 0.5 1.5 2 1.5 1.5 0.8 Max. 15.6 9.5 6.5 5.5 10 5.5 5.5 7.5 6.2 Value -55 to 125 C Min. 2 1 1 0.5 1.5 2 1.5 1.5 0.8 Max. 15.6 9.5 6.5 5.5 10 5.5 5.5 7.5 6.2 Unit tPLH tPHL Propagation Delay Time 15 1M 3.0 30 30 50 50 50 1000 500 500 500 500 2.0 2.0 2.5 2.5 2.5 ns (*) Voltage range is 3.3V 0.3V (**) Voltage range is 5.0V 0.5V CAPACITIVE CHARACTERISTICS Test Condition Symbol Parameter VCC (V) 0 1.8 2.5 3.3 fIN = 10MHz Value TA = 25 C Min. Typ. 4 12 18 24 Max. pF pF Unit CIN CPD Input Capacitance Power Dissipation Capacitance (note 1) 1) CPD is defined as the value of the IC's internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC 5/11 74LX1G14 TEST CIRCUIT RT = ZOUT of pulse generator (typically 50) TEST CIRCUIT AND WAVEFORM SYMBOL VALUE Symbol 1.65 to 1.95V CL RL VIH VM tr = tf 15pF/30pF 1M/1000 VCC VCC/2 <2.0ns VCC 2.3 to 2.7V 15pF/30pF 1M/500 VCC VCC/2 <2.0ns 2.7 to 5.5V 15pF/50pF 1M/500 VCC VCC/2 <2.5ns WAVEFORM: PROPAGATION DELAY (f=1MHz; 50% duty cycle) 6/11 74LX1G14 SOT23-5L MECHANICAL DATA mm. DIM. MIN. A A1 A2 b C D E E1 e e1 L 0.35 0.90 0.00 0.90 0.35 0.09 2.80 2.60 1.50 0 .95 1.9 0.55 13.7 TYP MAX. 1.45 0.15 1.30 0.50 0.20 3.00 3.00 1.75 MIN. 35.4 0.0 35.4 13.7 3.5 110.2 102.3 59.0 37.4 74.8 21.6 TYP. MAX. 57.1 5.9 51.2 19.7 7.8 118.1 118.1 68.8 mils 7/11 74LX1G14 SOT323-5L MECHANICAL DATA mm. DIM. MIN. A A1 A2 b C D E E1 e e1 L 0.10 0.80 0.00 0.80 0.15 0.10 1.80 1.80 1.15 0 .65 1.3 0.30 3.9 TYP MAX. 1.10 0.10 1.00 0.30 0.18 2.20 2.40 1.35 MIN. 31.5 0.0 31.5 5.9 3.9 70.9 70.9 45.3 25.6 51.2 11.8 TYP. MAX. 43.3 3.9 39.4 11.8 7.1 86.6 94.5 53.1 mils 8/11 74LX1G14 Tape & Reel SOT23-xL MECHANICAL DATA mm. DIM. MIN. A C D N T Ao Bo Ko Po P 3.13 3.07 1.27 3.9 3.9 3.23 3.17 1.37 4.0 4.0 12.8 20.2 60 14.4 3.33 3.27 1.47 4.1 4.1 0.123 0.120 0.050 0.153 0.153 0.127 0.124 0.054 0.157 0.157 13.0 TYP MAX. 180 13.2 0.504 0.795 2.362 0.567 0.131 0.128 0.0.58 0.161 0.161 0.512 MIN. TYP. MAX. 7.086 0.519 inch 9/11 74LX1G14 Tape & Reel SOT323-xL MECHANICAL DATA mm. DIM. MIN. A C D N T Ao Bo Ko Po P 3.98 3.98 2.25 2.7 1.2 4 4 4.2 4.2 0.156 0.156 175 12.8 20.2 59.5 60 60.5 14.4 0.088 0.106 0.047 0.157 0.157 0.165 0.165 TYP 180 13 MAX. 185 13.2 MIN. 6.889 0.504 0.795 2.362 0.567 TYP. 7.086 0.512 MAX. 7.283 0.519 inch 10/11 74LX1G14 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a registered trademark of STMicroelectronics (c) 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. (c) http://www.st.com 11/11 |
Price & Availability of 74LX1G14STR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |