 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 66058 SINGLE/DUAL CHANNEL, LOW-INPUT CURRENT, OPTOCOUPLER (Electrically similar to 6N140) Mii OPTOELECTRONIC PRODUCTS DIVISION Features: * * * * DSCC Approved 8978501PX (Dual) and 8981001PX (Single) High current transfer ratio: 1000% typical 1500 Vdc isolation test voltage Low input current requirement: 0.5mA Applications: * * * * * Telephone ring detection Voltage level shifting Isolated receiver input Communication systems Medical systems DESCRIPTION The 66058 single/dual optocoupler utilizes infrared LEDs optically coupled to high gain photodarlington detectors. This unique optocoupler provides high CTR and low leakage current over the full military temperature range (-55 to +125C). The 66058 is a 8 pin dual-in-line, hermetically sealed package and is available in standard and screened versions or tested to customer specifications. ABSOLUTE MAXIMUM RATINGS Storage Temperature........................................................................................................................................... -65C to +150C Operating Free-Air Temperature Range ............................................................................................................. -55C to +125C Lead Solder Temperature.........................................................................................260C for 10s (1.6mm below seating plane) Peak Forward Input Current (each channel) ................................................................................................ 20mA (1ms duration) Average Forward Input Current .......................................(see Note 1) ...............................................................................10mA Reverse Input Voltage ...............................................................................................................................................................5V Output Current - IO (each channel) ......................................................................................................................................40mA Output Power Dissipation (each channel) ........................(see Note 2) ..............................................................................50mW Supply Voltage - VCC ..........................................................(see Note 3)........................................................................0.5 to 20V Output Voltage - VO (each channel)...............................(see Note 3) ...................................................................... -0.5 to 20V Package Dimensions 0.370 [9.040] 0.390 [9.90] 8 REAR VIEW 7 6 5 Schematic Diagram DATE CODE NC 1 A2 8 7 6 Vcc EN V0 YYWW USA XXXX 1 2 3 4 K3 NC 4 5 GND PIN ONE TYPE NUMBER 0.320 [8.13]MAX 0.280 [7.11] 0.310 [7.88] PIN ONE 0.007 [0.18] 0.013 [0.33] 0.90 [2.28] 0.110 [2.80] END VIEW 0.170 [4.32]MAX A1 K2 K3 A4 8 Vcc 0.020 [0.51] MIN .020 [0.51] MAX 7 V01 6 V02 5 GND SIDE VIEW ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] Notes: 1. Derate IF at 0.33 mA/C above 110C. 2. Collector output power plus one half of the total supply power is total output power. Derate at 1.66mW/C above 110C. 3. The lowest total IOH over temperature is developed by keeping VCC as low as possible, but greater that 2 volts. The negative voltage at the detector side should be applied to Pin 10. MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3 - 36 66058 ELECTRICAL CHARACTERISTICS PARAMETER Current Transfer Ratio CTR SINGLE/DUAL CHANNEL, LOW-INPUT CURRENT OPTOCOUPLER Ta = -55C to 125C unless otherwise specified. SYMBOL MIN 300 300 200 TYP 1000 750 400 0.1 0.2 .005 .01 .01 1.4 MAX UNITS % % % TEST CONDITIONS IF = 0.5mA, VO = 0.4V, VCC = 4.5V IF = 1.6mA, VO = 0.4V, VCC = 4.5V IF = 5.0mA, VO = 0.4V, VCC = 4.5V IF = 0.5mA, IOL = 1.5mA, VCC = 4.5V IF = 5.0mA, IOL = 10mA, VCC = 4.5V IF = 2A, VO = VCC = 18V IF1 = 0mA, VCC = 18V IF1 = IF2 = 0mA, VCC = 18V IF1 = 1.6mA, VCC = 18V IF1 = IF2 =1.6mA, VCC = 18V IF = 1.6mA IR = 10A VI--0 = 1500Vdc, Relative Humidity = 45% tA = 25C, t = 5s IF = 0.5mA, VCC = 5.0V, RL = 4.7k IF = 1.6mA, VCC = 5.0V, RL = 1.5k IF = 5mA, VCC = 5.0V, RL = 680 IF = 0.5mA, VCC = 5.0V, RL= 4.7k IF = 1.6mA, VCC = 5.0V, RL = 1.5k IF = 5mA, VCC = 5.0V, RL = 680 NOTE 1,2 1,2 1,2 1 1,3 Logic Low Output Voltage Logic High Output Current High Level Output Current Low Level Supply Current Input Forward Voltage Input Reverse Breakdown Voltage Input-Output Insulation Leakage Current Propagation Delay Time To High Output Level Propagation Delay Time To Low Output Level -XX1 -XX2 -XX1 -XX2 VOL IOH ICCH ICCL VF BVR II--O 5 0.4 0.4 250 10 20 2 4 1.7 1.0 V V A A A mA mA V V A 1 1 4 tPLH 6 6 4 8 3 2 60 50 30 100 30 10 s s s s s s tPHL TYPICAL CHARACTERISTICS Ta = 25C, VCC = 5V Each Channel PARAMETER Input Capacitance Capacitance (Input-Output) Input Diode Temperature Coefficient Resistance (Input-Output) Resistance (Input-Input) Input-Input Insulation Leakage Current Common Mode Transient immunity at High Output Level SYMBOL CIN CI-O vF TA MIN TYP 60 1.5 -1.8 10 10 12 12 MAX UNITS pF pF mV/C TEST CONDITIONS VF = 0, f = MHz, ta = 25C f = 1MHz, ta = 25C IF = 1.6mA VI--O = 500V, ta = 25C VI--I = 500V, ta = 25C Relative Humidity = 45% VI--I = 500V, t = 5s VCM = 50V P-P,VCC = 5.0V, RL = 1.5k, IF = OmA, ta = 25C NOTE 1 1, 5 1 1, 5 6 6 7,9 RI-0 RI-I II-I CMH 500 0.5 1000 nA V/s Common Mode Transient CML 500 1000 V/s VCM = 50V P-P,VCC = 5.0V, 8,9 Immunity at Low Output Level RL = 1.5k, IF = 1.6mA, ta = 25C NOTES: 1. Each channel. 2. CURRENT TRANSFER RATIO is defined as the ratio of output collector current, IO, to the forward LED input current., IF , times 100%. 3. IF = 2A for channel under test. For all other channels, IF = 10mA. 4. Device considered a two-terminal device. 5. Measured between each input pair shorted together and all output pins shorted together. 6. Measured between each input pair shorted together. 7. CMH is the maximum tolerable common mode transient to assure that the output will remain in a high logic state (ie. VO > @.0V). 8. CML is the maximum tolerable common mode transient to assure that the output will remain in a low logic state (ie. VO < 0.8V). 9. In applications where dv/dt may exceed 50,000 V/s (such as static discharge) a series resistor, RCC , should be included to protect the detector IC's from destructively high surge currents. The recommended value is RCC = 1V = k 0.6IF (mA) RECOMMENDED OPERATING CONDITIONS: PARAMETER Input Current, Low Level Input Current, High Level Supply Voltage SYMBOL IFL IFH VCC MIN 0 0.5 2.0 MAX 2 5 18 UNITS A mA V MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3 - 37 |
Price & Availability of 66058
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |