 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2SD2615 Transistors For Motor / Relay drive (120V, 6A) 2SD2615 Structure NPN Silicon Epitaxial Planar Transistor (Darlington connection) External dimensions (Unit : mm) TO-220FN 10.0 4.5 3.2 2.8 Features 1) Darlington connection , high hFE. 2) Resistor inbetween base-emitter. 3) Built-in damper diode. (1)Base (2)Collector (3)Emitter 15.0 12.0 8.0 5.0 1.2 1.3 14.0 0.8 2.54 (1) (2) (3) 2.54 0.75 2.6 Applications Relay drive Motor drive Complements PNP 2SB1674 NPN 2SD2615 Absolute maximum ratings (Ta=25C) Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current DC Pulse Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Limits 120 120 6 6 10 2 30 150 -55 to +150 Unit V V V A A 1 Packaging specifications and hFE Package Type hFE 2SD2615 Code Basic ordering unit (pieces) Taping - 500 Equivalent circuit Collector power dissipation Junction temperature Storage temperature 1 t=100ms W(Ta=25C) W(Tc=25C) C C R1 R2 R1=5.0K R2=300 Base Collector Emitter Electrical characteristics (Ta=25C) Parameter Collector-emitter breakdown voltage Collector-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current gain Transition frequency Collector output capacitance 1 Pulse test 2 Transition frequency of the device Symbol BVCEO BVCBO ICBO IEBO VCE(sat) hFE fT Cob Min. Typ. Max. Unit 120 120 - - - 2k - - - - - - - - 40 50 - - 100 3 1.5 20k - - V V A mA V - pF IC=5mA IC=50A VCB=120V VEB=5V Conditions IC/IB=3A/6mA VCE=3V, IC=2A VCB=10V, IE=0A, f=1MHz 1 1 2 MHz VCE=5V, IE=-0.2A, f=10MHz 1/1 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
Price & Availability of 2SD2615
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |