 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NUP8020X6 5-Line Transient Voltage Suppressor Array This 5-line voltage transient suppressor array is designed for application requiring transient voltage protection capability. It is intended for use in over-transient voltage and ESD sensitive equipment such as cell phones, portables, computers, printers and other applications. This device features a monolithic common anode design which protects five independent lines in a single SOT-563 package. Features http://onsemi.com SOT-563 5-LINE TRANSIENT VOLTAGE SUPPRESSOR PIN ASSIGNMENT 1 2 3 PIN 1. 2. 3. 4. 5. 6. 6 5 4 CATHODE ANODE CATHODE CATHODE CATHODE CATHODE * Protects up to 5 Lines in a Single SOT-563 Package * ESD Rating of Class 3B (Exceeding 8 kV) per Human Body Model * * and Class C (Exceeding 400 V) per Machine Model. Compliance with IEC 61000-4-2 (ESD) 15 kV (Air), 8 kV (Contact) This is a Pb-Free Device Applications * Hand Held Portable Applications * Serial and Parallel Ports * Notebooks, Desktops, Servers MAXIMUM RATINGS (TJ = 25C, unless otherwise specified) Symbol PPK 1 Rating Peak Power Dissipation 8x20 msec double exponential waveform, (Note 1) Operating Junction Temperature Range Storage Temperature Range Lead Solder Temperature - Maximum (10 seconds) Human Body Model (HBM) Machine Model (MM) IEC 61000-4-2 Air (ESD) IEC 61000-4-2 Contact (ESD) Value 90 Unit W 6 54 3 12 MARKING DIAGRAM SOT-563 CASE 463A STYLE 6 UX M G G TJ TSTG TL ESD -40 to 125 -55 to 150 260 16000 400 15000 8000 C C C V UX = Specific Device Code M = Month Code G = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Device NUP8020X6T1G Package SOT-563 (Pb-Free) Shipping 4000/Tape & Reel Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Non-repetitive current pulse per Figure 1. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 2007 1 February, 2007 - Rev. 0 Publication Order Number: NUP8020X6/D NUP8020X6 ELECTRICAL CHARACTERISTICS (TJ = 25C, unless otherwise specified) Parameter Reverse Working Voltage Breakdown Voltage Reverse Leakage Current Capacitance (Note 2) IT = 1 mA, (Note 3) VRWM = 3 V VR = 0 V, f = 1 MHz (Line to GND) VR = 2.5 V, f = 1 MHz (Line to GND) Conditions Symbol VRWM VBR IR CJ 6.2 - - Min Typ - 6.8 0.01 54 Max 5.0 7.2 0.5 70 Unit V V mA pF 2. TVS devices are normally selected according to the working peak reverse voltage (VRWM), which should be equal or greater than the DC or continuous peak operating voltage level. 3. VBR is measured at pulse test current IT. http://onsemi.com 2 NUP8020X6 120 % OF RATED POWER OR IPP 100 80 60 40 20 0 10 PEAK POWER (W) 1000 TA = 25 C 100 0 25 50 75 100 125 150 1 10 PULSE DURATION (mS) 100 TA, AMBIENT TEMPERATURE (C) Figure 1. Power Derating vs. Ambient Temperature Figure 2. Peak Power vs. Pulse Duration 100 CT, TYPICAL CAPACITANCE (pF) TA = 25 C IPP, PEAK CURRENT (A) 60 TA = 25 C 50 40 30 20 10 0 10 1 0.1 6 8 10 12 14 16 0 1 2 3 4 5 6 VCL, CLAMP VOLTAGE (V) VR, REVERSE VOLTAGE (V) Figure 3. Peak Current vs. Clamp Voltage Figure 4. Typical Capacitance vs. Reverse Voltage 1000 TA = 25 C REVERSE CURRENT (nA) 100 TJ = 125 C FORWARD CURRENT (A) 1 TA = 25 C TJ = 125 C 0.1 10 1 TJ = 25 C TJ = 25 C 0.01 0.1 0.01 1 2 3 4 5 6 0.001 0.6 0.7 0.8 0.9 1.0 1.1 1.2 REVERSE VOLTAGE (V) FORWARD VOLTAGE (V) Figure 5. Reverse Current vs. Reverse Voltage Figure 6. Typical Forward Current vs. Forward Voltage http://onsemi.com 3 NUP8020X6 PACKAGE DIMENSIONS SOT-563, 6 LEAD CASE 463A-01 ISSUE F NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. MILLIMETERS MIN NOM MAX 0.50 0.55 0.60 0.17 0.22 0.27 0.08 0.12 0.18 1.50 1.60 1.70 1.10 1.20 1.30 0.5 BSC 0.10 0.20 0.30 1.50 1.60 1.70 INCHES NOM MAX 0.021 0.023 0.009 0.011 0.005 0.007 0.062 0.066 0.047 0.051 0.02 BSC 0.004 0.008 0.012 0.059 0.062 0.066 MIN 0.020 0.007 0.003 0.059 0.043 D -X- A L 4 6 5 1 2 3 E -Y- HE b e 5 6 PL M C XY 0.08 (0.003) DIM A b C D E e L HE STYLE 6: PIN 1. CATHODE 2. ANODE 3. CATHODE 4. CATHODE 5. CATHODE 6. CATHODE SOLDERING FOOTPRINT* 0.3 0.0118 0.45 0.0177 1.0 0.0394 1.35 0.0531 0.5 0.5 0.0197 0.0197 SCALE 20:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative http://onsemi.com 4 NUP8020X6/D |
Price & Availability of NUP8020X6
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |