 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DDTA144ELP PRE-BIASED (R1=R2) SMALL SIGNALSURFACE MOUNT 100mA PNP TRANSISTOR NEW PRODUCT Features * * * * * Epitaxial Planar Die Construction Ultra-Small Leadless Surface Mount Package Ideally Suited for Automated Assembly Processes Lead Free By Design/RoHS Compliant (Note 1) "Green" Device (Note 2) 2 3 1 Mechanical Data * * * * * * Case: DFN1006-3 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminal Connections: Collector Dot (See Diagram) Terminals: Finish -- NiPdAu annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Marking Code P2, Dot denotes Collector Side Ordering Information: See Page 4 Weight: 0.001 grams (approximate) Fig. 1 IN 1 B C3 (or -supply) E 2 OUT IN B 1 2 3 C OUT (or -supply) R1 R2 E * * + Supply or GND GND (or +supply) Schematic and Pin Configuration Equivalent Inverter Circuit Fig. 2 Component P/N DDTA144ELP R1(NOM) 47K R2(NOM) 47K Figure 2 Maximum Ratings Supply Voltage Input Voltage Output Current (Io) Power Dissipation (Note 3) Power Deration above 25C @TA = 25C unless otherwise specified Symbol VCC VIN IC(max) Pd Pder Value -50 +10 to -40 -100 250 2 Unit V V mA mW mW/C Characteristic Thermal Characteristics Characteristic Junction Operation and Storage Temperature Range Thermal Resistance, Junction to Ambient Air (Note 3) (Equivalent to one heated junction of NPN) Notes: 1. 2. 3. Symbol Tj, Tstg RJA Value -55 to +150 400 Unit C C/W No purposefully added lead. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. Device mounted on FR-4 PCB, 1" x 0.85" x 0.062"; pad layout as shown on page 5 or Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. DS30844 Rev. 3 - 2 1 of 5 www.diodes.com DDTA144ELP (c) Diodes Incorporated NEW PRODUCT Electrical Characteristics Characteristic Off Characteristics (Note 4) Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage* Collector Cutoff Current* Base Cutoff Current (IBEX) Collector-Base Cut Off Current Collector-Emitter Cut Off Current, IO(OFF) Emitter-Base Cut Off Current Input Off Voltage On Characteristics (Note 4) Base-Emitter Turn-On Voltage* @TA = 25C unless otherwise specified Symbol Min Typ Max Unit Test Condition V(BR)CBO V(BR)CEO V(BR)EBO ICEX IBL ICBO ICEO IEBO VI(OFF) -50 -50 -4.5 -0.5 -0.5 -0.5 -0.5 -0.5 -0.3 V V V A A A A mA V IC = -10A, IE = 0 IC = -1.0mA, IB = 0 B IE = -50A, IC = 0 VCE = -50V, VEB(OFF) = 3.0V VCE = -50V, VEB(OFF) = 3.0V VCB = -50V, IE = 0 VCE = -50V, IB = 0 B VEB = 4V, IC = 0 VCC = -5V, IO = -100uA VBE(ON) -3 90 120 2.2 21 -0.69 -0.78 -0.88 -0.98 -7.2 -0.15 -0.85 -0.3 2.86 26 V V V V V mA V V V K VCE = -5V, IC = -2mA VCE = -5V, IC = -10mA IC = -10mA, IB = -1mA, VCE = -5V B Base-Emitter Saturation Voltage* Input-On Voltage Input Current VBE(SAT) VI(ON) II IC = -50mA, IB = -5mA, VCE = -5V B VO = -0.3V, IO = -20mA VI = -5V VCE =-5V, IC = -2mA VCE = -5V, IC = -5mA VCE = -5V, IC = -10mA VCE = -5V, IC = -100mA VCE = -5V, IC = -200mA VCE = -5V, IC = -300mA IB = -1mA, IC = -10mA IB = -5mA, IC = -50mA II = -0.5mA, IO = -50mA DC Current Gain hFE 150 100 180 250 Collector-Emitter Saturation Voltage* Output On Voltage (Same as VCE(SAT)) Input Resistance Resistance Ratio Small Signal Characteristics Current Gain-Bandwidth Product * Guaranteed by design. Notes: 4. VCE(SAT) VO(ON) R1 (R2/R1) 1.54 17 fT 250 MHz VCE = -10V, IE = -5mA, f = 100 MHz Short duration test pulse used to minimize self-heating effect. Pulse Test: Pulse width tp<300 uS, Duty Cycle, d<=2%. DS30844 Rev. 3 - 2 2 of 5 www.diodes.com DDTA144ELP (c) Diodes Incorporated NEW PRODUCT Typical Characteristics 300 PD, POWER DISSIPATION (mW) 250 200 150 100 50 400 0 0 25 50 75 100 125 150 175 TA, AMBIENT TEMPERATURE (C) Fig. 3 Power Derating Curve 4 3.7 V O = 0.3V I O = 5mA V CE = -5V VI(ON), INPUT VOLTAGE (V) 3.1 2.8 2.5 2.2 1.9 1.6 1.3 1 -60 -30 0 30 60 90 120 150 TA, AMBIENT TEMPERATURE (C) Fig. 5 Input Voltage vs. TA VBE, BASE EMITTER VOLTAGE (V) hFE, DC CURRENT GAIN 3.4 IC, COLLECTOR CURRENT (mA) Fig. 6 DC Current Gain vs IC VCE(SAT), COLLECTOR VOLTAGE (V) IC/IB = 10 IC, COLLECTOR CURRENT (mA) Fig. 7 IC vs. VBE(ON) IC, COLLECTOR CURRENT (mA) Fig. 8 IC vs. VCE(SAT) DS30844 Rev. 3 - 2 3 of 5 www.diodes.com DDTA144ELP (c) Diodes Incorporated NEW PRODUCT VBE(SAT), BASE EMITTER VOLTAGE (V) IC/IB = 10 IC, COLLECTOR CURRENT (mA) Fig. 9 IC vs. VBE(SAT) Ordering Information (Note 6) Device DDTA144ELP-7 Notes: Marking Code P2 Packaging DFN1006-3 Shipping 3000/Tape & Reel 6. For packaging details, please see page 5 or go to our website at http://www.diodes.com/ap2007.pdf. Marking Information P2 = Product Type Marking Code YM = Date Code Marking Y = Year ex: T = 2007 M = Month e.g. 9 = September Fig. 10 Date Code Key Year Code Month Code Jan 1 2007 U Feb 2 Mar 3 2008 V Apr 4 2009 W May 5 Jun 6 Jul 7 2010 X Aug 8 Sep 9 2011 Y Oct O Nov N 2012 Z Dec D DS30844 Rev. 3 - 2 4 of 5 www.diodes.com DDTA144ELP (c) Diodes Incorporated NEW PRODUCT Mechanical Details DFN1006-3 G H Dim A B C D G H Min 0.95 0.55 0.45 0.20 0.47 0 0.10 0.20 -- -- Max 1.05 0.65 0.55 0.30 0.53 0.05 0.20 0.30 -- -- Typ 1.00 0.60 0.50 0.25 0.50 0.03 0.15 0.25 0.35 0.40 A K BC M K L M N All Dimensions in mm D N Fig. 11 L Suggested Pad Layout: (Based on IPC-SM-782) C DFN1006-3 X1 Z G1 G2 X X1 Y C Y Z G1 1.1 0.3 0.2 0.7 0.25 0.4 0.7 X G2 Fig. 15 All Dimensions in mm Fig. 12 IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30844 Rev. 3 - 2 5 of 5 www.diodes.com DDTA144ELP (c) Diodes Incorporated |
Price & Availability of DDTA144ELP
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |