|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Advance Information PE9308 Product Description The PE9308 is a high-performance dynamic UltraCMOSTM prescaler ideal for Ku band Transceiver applications. It has a fixed divide ratio of 4 with an operating frequency range of 4.0 GHz to 13.5 GHz. The PE9308 operates on a nominal 2.6 V supply and draws only 15 mA. It is packaged in a small 8-lead Flat Pack and is also available in Die form for Hybrid application. The PE9308 is manufactured in Peregrine's patented Ultra Thin Silicon (UTSi(c)) CMOS process, offering the performance of GaAs with the economy and integration of conventional CMOS. 13.5 GHz Low Power UltraCMOSTM Divide-by-4 Prescaler for RAD-Hard Space Applications Features * High-frequency operation: up to 13.5 GHz * Fixed divide ratio of 4 * Low-power operation:15 mA typical @ 2.6V * SEL Immune due to UltraCMOSTM * SEU <10-10 errors / bit-day * 100 Krads (Si) Total Dose * Small package: 8-lead Formed Flat pack * Available as Die Figure 1. Functional Schematic Diagram Figure 2. Package Type 8-lead CSOIC D SET Q Q D SET Q Q IN CLR OUT Output Buffer CLR Table 1. Electrical Specifications (ZS = ZL = 50 ) VDD = 2.45< VDD <2.75 V, -40 C TA 85 C, unless otherwise specified Parameter Frequency Supply Voltage Supply Current SSB Phase noise (PhN) Input Power (Pin) Conditions Minimum 4000 2.45 8 Typical Maximum 13,500 Units MHz V mA dBc/Hz 2.6 15 -120 2.75 20 100 KHz Offset; Pin=0dBm 7.0 GHz Fin 10.0 GHz 4.0 GHz < Fin 7.0 GHz 0 +5 0 +10 +10 dBm dBm dBm Output Power (Pout) 4.0 GHz Fin 10.0 GHz Document No. 70-0187-01 www.psemi.com (c)2005 Peregrine Semiconductor Corp. All rights reserved. Page 1 of 7 PE9308 Advance Information Figure 3. Pin Configuration (Top View) Electrostatic Discharge (ESD) Precautions When handling this UltraCMOSTM device, observe the same precautions that you would use with other ESD-sensitive devices. Although this device contains circuitry to protect it from damage due to ESD, precautions should be taken to avoid exceeding the rating specified in Table 3. Latch-Up Avoidance Unlike conventional CMOS devices, UltraCMOSTM devices are immune to latch-up. Device Functional Considerations VDD1 1 2 8 7 NC VDD1 RF IN NC PE9308 3 4 6 5 RF OUT VDD2 NC Table 2. Pin Descriptions Pin No. 1 2 3 4 5 6 7 8 Pin Name VDD1 VDD1 RF IN NC VDD2 RF OUT NC NC Description DC Supply Voltage DC Supply Voltage RF Input Not connected DC Supply Voltage RF Output. Not connected Not connected The PE9308 takes an input signal frequency from between 4.0 GHz to 13.5 GHz and produces an output signal frequency one-fourth that of the supplied input. In order for the prescaler to work properly, several conditions need to be adhered to. It is crucial that pins 1, 2 and 5 be supplied with a bypass capacitor to ground. In addition, the output signal (pins 6) needs to be ac coupled via an external capacitor as shown in the test circuit below. The ground pattern on the board should be made as wide as possible to minimize ground impedance. Table 3. Absolute Maximum Ratings Symbol VDD TST TOP VESD PINMAX Parameter/ Conditions DC Supply voltage Storage temperature range Operating temperature range ESD voltage (Human Body Model) Maximum input power Min Max 3.0 Units V C C V dBm -65 -40 150 85 250 14 Absolute Maximum Ratings are those values listed in the above table. Exceeding these values may cause permanent device damage. Exposure to absolute maximum ratings for extended periods may affect device reliability. (c)2005 Peregrine Semiconductor Corp. All rights reserved. Page 2 of 7 Document No. 70-0187-01 UltraCMOSTM RFIC Solutions PE9308 Advance Information Figure 4. Test Circuit Block Diagram 1 VDD1 VDD1 NC NC 8 VDD 2 0.01F 10 pF 0.5 pF 3 IN NC 7 Spectrum Analyzer PE9308 OUT VDD2 6 6.8 pF 50 50 T Line* 4 5 T Line* VDD 0.5 pF 10 pF 0.01F RF Source *T Line = Transmission Line Figure 5. High Frequency System Application The wideband frequency of operation of the PE9308 makes it an ideal part for use in a DBS down converter system. INPUT DBS 1 st BPF SAW AGC IF FM DEMOD BASEBAND OUTPUT DIVIDE BY 4 PE9701 PE9308 LOW NOISE PLL SYNTH LPF (c)2005 Peregrine Semiconductor Corp. All rights reserved. Page 3 of 7 Document No. 70-0187-01 UltraCMOSTM RFIC Solutions PE9308 Advance Information Figure 6: Input Power Sensitivity vs Input Frequency at Nominal Voltage, 25 C 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 6.5 7 7.5 8 8.5 9 9.5 10 10.5 11 11.5 12 2.60V @ 25C Pin (dBm) 12.5 13 13.5 Input Frequency (GHz) Figure 7: Output Power vs Output Frequency at Nominal Voltage, 25 C 10 8 6 4 2 0 -2 1.625 2.60V @ 25C Pout (dBm) 1.825 2.025 2.225 2.425 2.625 2.825 3.025 3.225 Output Frequency (GHz) Document No. 70-0187-01 www.psemi.com (c)2005 Peregrine Semiconductor Corp. All rights reserved. Page 4 of 7 PE9308 Advance Information Evaluation Kit The Ceramic SOIC Prescaler Evaluation Board was designed to help customers evaluate the PE9308 divide-by-4 prescaler. On this board, the device input (pin 3) is connected to the SMA connector J2 through a 50 transmission line. The device output (pin 6) is connected to SMA connector J3 through a 50 transmission line. J1 provides DC power to the device via pin 1,2,4,5,7,8.Multiple decoupling capacitors (C4,5,8,9=10pF, C3,6,7,10=0.01uF) are used. It is the responsibility of the customer to determine proper supply decoupling for their design application. The board is constructed using 4 layers. The top and bottom layers are comprised of Rogers low loss 4350 material having a core thickness of 0.010"; while the internal layers are comprised of FR-4. The overall board thickness is 0.062". Applications Support If you have a problem with your evaluation kit or if you have applications questions call (858) 7319400 and ask for applications support. You may also contact us by fax or e-mail: Fax: (858) 731-9499 E-Mail: help@psemi.com Figure 8. Evaluation Board Layouts Peregrine Specification 101/0186 Figure 9. Evaluation Board Schematic Peregrine Specification 102/0247 Document No. 70-0187-01 www.psemi.com (c)2005 Peregrine Semiconductor Corp. All rights reserved. Page 5 of 7 PE9308 Advance Information Figure 10. Package Drawing 8-lead CSOIC .380 / .410 .210 / .250 Pin 1 .180 SQ MAX .050 TYP TOP VIEW .150 TYP .015 TYP SIDE VIEW .005 Typ .070 Max ALL DIMENSIONS ARE IN INCHES DRAWINGS ARE NOT TO SCALE Table 4. Ordering Information Order Code 9308-01 9308-11 9308-00 Part Marking 9308 9308 PE9308-EK Description PE9308-08CFPJ-B Engineering Samples PE9308-08CFPJ-B Production Units PE9308 Evaluation Kit Package 8-lead FLAT PACK 8-lead FLAT PACK Evaluation Board Shipping Method 50 / Tray 50 / Tray 1 / Box (c)2005 Peregrine Semiconductor Corp. All rights reserved. Page 6 of 7 Document No. 70-0187-01 UltraCMOSTM RFIC Solutions PE9308 Advance Information Sales Offices The Americas Peregrine Semiconductor Corp. 9450 Carroll Park Drive San Diego, CA 92121 Tel 858-731-9400 Fax 858-731-9499 North Asia Pacific Peregrine Semiconductor K.K. 5A-5, 5F Imperial Tower 1-1-1 Uchisaiwaicho, Chiyoda-ku Tokyo 100-0011 Japan Tel: +81-3-3502-5211 Fax: +81-3-3502-5213 Europe Peregrine Semiconductor Europe Commercial Products: Batiment Maine 13-15 rue des Quatre Vents F- 92380 Garches, France Tel: +33-1-47-41-91-73 Fax : +33-1-47-41-91-73 Space and Defense Products: 180 Rue Jean de Guiramand 13852 Aix-En-Provence cedex 3, France Tel: +33(0) 4 4239 3361 Fax: +33(0) 4 4239 7227 South Asia Pacific Peregrine Semiconductor 28G, Times Square, No. 500 Zhangyang Road, Shanghai, 200122, P.R. China Tel: +86-21-5836-8276 Fax: +86-21-5836-7652 For a list of representatives in your area, please refer to our Web site at: www.psemi.com Data Sheet Identification Advance Information The product is in a formative or design stage. The data sheet contains design target specifications for product development. Specifications and features may change in any manner without notice. The information in this data sheet is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user's own risk. No patent rights or licenses to any circuits described in this data sheet are implied or granted to any third party. Peregrine's products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. The Peregrine name, logo, and UTSi are registered trademarks and UltraCMOS is a trademark of Peregrine Semiconductor Corp. Preliminary Specification The data sheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. Product Specification The data sheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a DCN (Document Change Notice). Document No. 70-0187-01 www.psemi.com (c)2005 Peregrine Semiconductor Corp. All rights reserved. Page 7 of 7 |
Price & Availability of 9308 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |