|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Ordering number : ENN8042 SCH2201 SCH2201 Applications * NPN Epitaxial Planar Silicon Transistor Switching, Driver Applications Low-frequency General-Purpose amplifier, high-speed switching, motor drivers, muting. Features * * Composite type with 2 NPN transistors contained in a single package, facilitating high-density mounting. Ultrasmall package permitting applied sets to be small and slim. Specifications Absolute Maximum Ratings at Ta=25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Conditions Ratings 20 15 5 0.8 1.6 Mounted on a ceramic board (600mm2!0.8mm) 1unit 0.4 150 --55 to +150 Unit V V V A A W C C Electrical Characteristics at Ta=25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Symbol ICBO IEBO hFE fT Cob VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO VCB=12V, IE=0 VEB=4V, IC=0 VCE=2V, IC=50mA VCE=2V, IC=50mA VCB=10V, f=1MHz IC=400mA, IB=20mA IC=400mA, IB=20mA IC=10A, IE=0 IC=1mA, RBE= IE=10A, IC=0 20 15 5 300 440 4 140 0.8 280 1.2 Conditions Ratings min typ max 100 100 800 MHz pF mV V V V V Unit nA nA Marking : EE Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N3004EA TS IM TA-101000 No.8042-1/4 SCH2201 Continued from preceding page. Parameter Turm-ON Time Storage Time Fall Time Symbol ton tstg tf Conditions See specified test circuit. See specified test circuit. See specified test circuit. Ratings min typ 30 165 25 max Unit ns ns ns Package Dimensions unit : mm 2237 1.6 Electrical Connection 6 5 4 0.05 0.2 654 0.2 1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 Top view 1.6 1.5 0.05 1 2 3 0.5 1 2 3 0.56 1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 SANYO : SCH6 Switching Time Test Circuit PW=20s D.C.1% INPUT IB1 OUTPUT IB2 VR 50 + 220F VBE= --5V + 470F VCC=5V RB 0.25 RL IC=20IB1= --20IB2=400mA 1000 IC -- VCE 20. 0m A mA 900 .0 10 mA A 7.0m 5.0mA Collector Current, IC -- mA 1200 IC -- VBE VCE=2V Collector Current, IC -- mA 800 700 600 500 400 300 200 100 0 0 1000 30.0 3.0mA 2.0mA 1.5mA 800 600 1.0mA 0.6mA 0.3mA IB=0 100 200 300 400 500 600 700 800 900 1000 400 200 0 0 0.2 0.4 0.6 0.8 1.0 1.2 IT05038 Collector-to-Emitter Voltage, VCE -- mV IT05037 Base-to-Emitter Voltage, VBE -- V Ta=7 5C 25C --25C No.8042-2/4 SCH2201 1000 hFE -- IC VCE=2V Ta=75C 1000 7 5 3 2 100 7 5 3 2 VCE(sat) -- IC IC / IB=20 7 DC Current Gain, hFE 5 25C --25C Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 3 C 75 a= 25C T -- 2 25 10 7 5 C 100 1.0 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 IT05039 3 1.0 2 3 5 7 10 2 3 5 7 100 2 3 Collector Current, IC -- mA 1000 7 VCE(sat) -- IC Collector Current, IC -- mA 3 5 7 1000 IT05042 VBE(sat) -- IC IC / IB=50 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 2 IC / IB=20 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 5 3 2 100 7 5 3 2 1.0 Ta= --25C 7 = Ta 7 C 5 C 5 --2 25C 5 75C C 25 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 IT05043 10 1.0 3 1.0 2 3 5 7 10 2 3 5 7 100 2 3 Collector Current, IC -- mA 10 Collector Current, IC -- mA 1000 5 7 1000 IT05044 Cob -- VCB f=1MHz Gain-Bandwidth Product, fT -- MHz fT -- IC VCE=2V 7 5 Output Capacitance, Cob -- pF 7 5 3 3 2 2 100 7 1.0 1.0 1.0 2 3 5 7 10 2 3 2 3 5 7 10 2 3 5 7 100 2 3 Collector-to-Base Voltage, VCB -- V 10 7 5 IT05041 500 Ron -- IB IN Collector Current, IC -- mA 5 7 1000 IT05040 PC -- Ta f=1MHz 1k 1k IB OUT Collector Dissipation, PC -- mW 400 M ON-resistance, Ron -- 3 2 ou nt ed on 300 ac er am 1.0 7 5 3 2 ic bo ar 200 d( 60 0m m2 !0 100 .8m m )1 un it 160 0.1 0.1 0 2 3 5 7 1.0 2 3 5 Base Current, IB -- mA 7 10 IT06386 0 20 40 60 80 100 120 140 Ambient Temperature, Ta -- C IT06712 No.8042-3/4 SCH2201 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 2004. Specifications and information herein are subject to change without notice. PS No.8042-4/4 |
Price & Availability of SCH2201 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |