 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NLP25 Series * * * * * Single, dual and triple output LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 20-25W AC/DC Universal Input Switch Mode Power Supplies 1 4.00 x 2.07 x 0.91 inch package Overvoltage protection and short circuit protection 25W with free air convection cooling EN55022, EN55011 conducted emissions level B UL, VDE and CSA safety approvals The NLP25 series is a 25W universal input AC/DC power supply on a 4.00 x 2.07 inch card with a profile of less than 1 inch. The availability of four single output and three multiple output models in an extremely small package size make the NLP25 ideal for use in space critical, low power communication applications requiring an off line power solution. The NLP25 provides 25W of output power with free air convection cooling which can peak at 30W for 60 seconds. Standard features include overvoltage and short circuit protection. The series, with full international safety approvals and the CE mark, meets conducted emissions EN55022 level B and complies to EN61000-4-2,-3,-4, -5 and -6 immunity standards. The NLP25 series is designed for use in off line, low power data networking and computer applications with limited space, such as hubs, routers, POS terminals, external disk storage and cable modems. The availability of 5V outputs in single and multiple configurations provides a solution for a myriad of microprocessor applications. 2 YEAR WARRANTY All specifications are typical at nominal input, full load at 25C unless otherwise stated SPECIFICATIONS OUTPUT SPECIFICATIONS Total regulation (Line and load) Overshoot/undershoot Transient response Main output Auxiliary outputs At turn-on Main output 50% to 100% full load step 2.0% 5.0% 2.0% 5.0% max. dev., 1ms recovery to 1.0% 0.02%/C Main output See table Continuous with autorestart See table EMC CHARACTERISTICS Radiated emissions Conducted emissions Electrostatic discharge Electrical fast transients/bursts Surge susceptibility RF field susceptibility RF conducted disturbance EN55022/11, FCC part 15 EN55022/11, FCC part 15 EN61000-4-2 EN61000-4-4 EN61000-4-5 EN61000-4-3 EN61000-4-6 Level A Level B Level 2 Level 3 Level 3 Level 3 Level 3 Temperature coefficient Overvoltage protection Short circuit protection Minimum output current INPUT SPECIFICATIONS Input voltage range Input frequency range Input current Safety ground leakage current 90VAC 230VAC 120VAC, 60Hz 230VAC, 50Hz Universal input GENERAL SPECIFICATIONS Hold-up time Efficiency Isolation voltage Switching frequency Approvals and standards (See Notes 4, 8) Weight MTBF MIL-HDBK-217F 110VAC @ full load 110VAC @ full load Input/output Input/chassis Fixed 5ms typ. 70% typ. 3000VAC 1500VAC 60kHz, 10kHz EN60950, IEC950 VDE0805, UL1950 CSA C22.2 No. 950 115g (4oz) 150,000 hours min. 90 to 264VAC 127 to 375VDC 47Hz to 440Hz 0.75A rms max. 0.35A rms max. 0.2mA 0.4mA ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Notes 7, 8) Operating ambient, FL Non-operating 0C to 50C, ambient, convection cooled Peak Non-condensing Operating Non-operating 5Hz to 500Hz MIL-STD-810E 0C to +50C -40C to +85C Full load See Note 1 5% to 95% RH 10,000 feet max. 30,000 feet max. 2.4G rms peak 516.4 Part IV Relative humidity Altitude Vibration (See Note 6) Shock File Name: NLP25.PDF Rev: 01 Jan 2000 NLP25 Series OUTPUT POWER 20.8W OUTPUT VOLTAGE +5V (IA) +12V (IB) -12V (IC) 20.1W +5V (IA) +12V (IB) -5V (IC) 19.6W +5V (IA) +12V (IB) 25W 25W 25W 25W Notes 1 Single, dual and triple output LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 20-25W AC/DC Universal Input Switch Mode Power Supplies 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT CURRENT RIPPLE MIN (3) (2) OVP THRESHOLD (5) TOTAL REGULATION 2.0% 5.0% 5.0% (3) MODEL NUMBER NLP25-7608 MAX 2.0A 0.8A 0.1A 2.0A 0.8A 0.1A 2.0A 0.8A 5.0A 2.08A 1.04A 0.52A PEAK 2.5A 1.2A (1) 0.2A 0.1A 0A 0.2A 0.1A 0A 0.2A 0.1A 0A 0A 0A 0A 50mV 120mV 50mV 50mV 120mV 50mV 50mV 120mV 50mV 120mV 150mV 150mV 5.6V to 6.9V 0.15A 2.5A 1.2A 0.15A 2.5A 1.2A 6.0A 2.5A 1.25A 0.6A 5.6V to 6.9V 2.0% 5.0% 5.0% NLP25-7607 5.6V to 6.9V 2.0% 5.0% NLP25-7629 +5V +12V +24V +48V 5.6V to 6.9V 14V to 16.7V 29V to 34.2V 55V to 60V 2.0% 2.0% 2.0% 2.0% NLP25-7605 NLP25-7612 NLP25-7624 NLP25-7617 2 3 4 5 6 7 8 Peak output current lasting less than 60 seconds with duty cycle less than 5.0%. During peak loading, output voltage may exceed total regulation limits. 20MHz bandwidth, peak to peak, measured differentially with a 12 inch twisted pair of number 16 AWG copper wire, terminated with a 47F capacitor of proper polarity and voltage rating. Total regulation is defined as the static output regulation at 25C, including initial tolerance, line voltage within stated limit, load current within stated limit, and output voltage adjusted to their factory settings. To achieve specified regulation on multiple output models, minimum loads are required on V(A) and V(B) as outlined in above table. To maintain user-system safety approvals, the input power cable must be appropriately rated and approved. Main output voltage is protected by a Zener diode. Three orthogonal axes, random vibration 10 minutes for each axes, 2.4G rms 5Hz to 500Hz. CAUTION: Allow a minimum of 5 seconds after disconnecting line power when making thermal measurements. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. J2 Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 OUTPUT PIN CONNECTIONS SINGLE DUAL V (A) Return V (A) Return V (A) No Connection Return V (A) Return V (B) TRIPLE V (C) Return V (A) Return V (B) INPUT PIN CONNECTIONS J1 Pin 1 Pin 3 Pin 5 AC Ground AC Line AC Neutral www.artesyn.com File Name: NLP25.PDF Rev: 01 Jan 2000 NLP25 Series Single, dual and triple output LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 20-25W AC/DC Universal Input Switch Mode Power Supplies 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm 4.00 0.02 (101.60 0.5) 3.730 0.02 (94.74 0.5) Maximum Component Height 0.91 (23.11) 1 2.07 0.02 (52.58 0.5) J1 5 3 1 J2 1.80 0.02 (45.72 0.5) If Metallic fastners are used, Max. stand-off dia. should be 0.212 (5.38) and the screw or washer should not protrude beyond the circle. ALL DIMENSIONS IN INCHES (mm) o0.125 0.01 (o3.18 0.25) Input and output connectors AC (J1) connector type Molex 22-23-2051 or equivalent. Mating connectors AC (J1) mating connector type Molex 22-01-2057 with Molex 08-52-0123 crimp terminals or equivalent. DC (J2) mating connector type Molex 22-01-2057 with Molex 08-52-0123 crimp terminals or equivalent. DC (J2) connector type Molex 22-23-2051 or equivalent. International Safety Standard Approvals VDE0805/EN60950/IEC950 File No. 10401-3336-0118 UL1950 File No. E136005 CSA C22.2 No. 950 File No. LR41062 Data Sheet (c) Artesyn Technologies(R) 2002 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. www.artesyn.com File Name: NLP25.PDF Rev: 01 Jan 2000 |
Price & Availability of NLP25-7605
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |