Part Number Hot Search : 
346610 L11D3FB 3210169 KA79M15 SD4010 AN442 CU341A 35123
Product Description
Full Text Search
 

To Download MMBTA56 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 UNISONIC TECHNOLOGIES CO., LTD MMBTA56
AMPLIFIER TRANSISTOR
FEATURES
3
* Collector-Emitter Voltage: VCEO=-80V * Collector Dissipation: PD=350mW
PNP SILICON TRANSISTOR
1 2 SOT-23
*Pb-free plating product number: MMBTA56L
ORDERING INFORMATION
Order Number Normal Lead Free Plating MMBTA56-AE3-R MMBTA56L-AE3-R Package SOT-23 Pin Assignment 1 2 3 E B C Packing Tape Reel
MMBTA56L-AE3-R (1)Packing Type (2)Package Type (3)Lead Plating (1) R: Tape Reel (2) AE3: SOT-23 (3) L: Lead Free Plating, Blank: Pb/Sn
MARKING
2G
www.unisonic.com.tw Copyright (c) 2005 Unisonic Technologies Co., Ltd
1 of 5
QW-R206-090,A
MMBTA56
ABSOLUTE MAXIMUM RATINGS (TA=25 )
PNP SILICON TRANSISTOR
PARAMETER SYMBOL RATINGS UNIT Collector-Base Voltage VCBO -80 V Collector-Emitter Voltage VCEO -80 V Emitter-Base Voltage VEBO -4 V Collector Current - Continuous IC -500 mA 350 mW Total Device Dissipation(Note 1) PD 2.8 mW/ Derate Above 25 Junction Temperature TJ +150 Storage Temperature TSTG -55 ~ +150 Note 1. Device mounted on FR-4=1.6x1.6x0.06 in 2. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied.
THERMAL DATA
PARAMETER Thermal Resistance, Junction to Ambient SYMBOL JA MAX 357 UNIT /W
ELECTRICAL CHARACTERISTICS (Ta=25 , unless otherwise specified)
PARAMETER OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage (Note 1) Emitter-Base Breakdown Voltage Collector Cutoff Current Collector Cutoff Current ON CHARACTERISTICS DC Current Gain SYMBOL BVCEO BVEBO ICES ICBO hFE TEST CONDITIONS IC=-1.0mA, IB=0 IE=-100A, Ic=0 VCE=-60V, IB=0 VCB=-80V, IE=0 IC=-10mA, VCE=-1V IC=-100mA, VCE=-1V IC=-100mA, IB=-10mA IC=-100mA, VCE=-1V MIN -80 -4 -0.1 -0.1 100 100 -0.25 -1.2 100 V V MHz TYP MAX UNIT V V A A
Collector-Emitter Saturation Voltage VCE(SAT) Base-Emitter on Voltage VBE(ON) SMALL-SIGNAL CHARACTERISTICS IC=-10mA, VCE=-2V, Current Gain Bandwidth Product fT (Note2) f=100MHz Note 1: Pulse test: PW300s, Duty Cycle2% 2: fT is defined as the frequency at which IhfeI extrapolates to unity.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 5
QW-R206-090,A
MMBTA56
SWITCHING TIME TEST CIRCUITS
PNP SILICON TRANSISTOR
TURN-ON TIME VCC -1.0V +40V 100
5 .0s
TURN-OFF TIME VCC +VBB +40V OUTPUT CS 6.0pF +10V 0 tr =3.0ns 100 VIN
5.0s
RL
RL OUTPUT CS 6.0pF
VIN 5.0F
RB 100
RB 100
tr=3.0ns
5.0F
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 5
QW-R206-090,A
MMBTA56
TYPICAL CHARACTERISTICS
200
Current-Gain Bandwidth Product, f T (MHz)
PNP SILICON TRANSISTOR
Current -Gain Bandwidth Product
100 70
Capacitance
TJ=25 Cibo
Capacitance, C (pF)
100 70 50 30
VCE=-2.0V TJ=25
50 30 20 Cobo 10
7.0 5.0 -0.1-0.2 -0.5-10 -20 -5.0-10 -20 -50 -100 Reverse Voltage, VR (V)
20 -2.0-3.0 -5.0 -7.0-10 -20-30 -50-70-100 -200 Collector Current, I C (mA)
1.0K 700 500
Switching Time
Active-Region Safe Operating Area
-1.0K -700 -500
Collector Current, IC (mA)
1.0ms T C=25
s 0 10
Time, t (ns)
300 200 100 70 50
ts
-300 -200
1.0s
tf
VCC=-40V 30 I C/IB=10 tr 20 I B1=I B2 T =25 t d@VBE(off )=-0.5V 10 J -5.0-7.0 -10 -20 -30-50-70-100-200-300-500 Collector Current IC (mA) ,
-100 TA=25 -70 -50 MMBTA55 -30 -20 MMBTA56
Current Limit Thermal Limit Second Breakdown Limit
-10 -1.0 -2.0-3.0-5.0 -7.0-10 -20-30 -50 -70-100 Collector-Emitter Voltage, VCE (V)
DC Current Gain
400 TJ=125 VCE=-1.0V -1.0 -0.8 Voltage, V 25 -55 -0.6
ON
T J=125
Voltages
DC Current Gain, hFE
VBE(SAT )@I C/IB=10
200
VBE(ON)@VCE=-1.0V -0.4 -0.2 VCE(SAT) @IC/I B=10
100 80 60 40 -0.5 -1.0-2.0 -5.0-10 -20 -50 -100-200 -500 Collector Current IC (mA) ,
0 -0.5 -1.0-2.0 -5.0 -10 -20 -50 -100-200-500 Collector Current, I C (mA)
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 5
QW-R206-090,A
MMBTA56
TYPICAL CHARACTERISTICS(Cont.)
Collector Saturation Region
Collector-Emitter Voltage, VCE (V) )
PNP SILICON TRANSISTOR
-0.8 -0.6 -0.4 -0.2 IC= -100mA IC=-50 mA I C=-500 mA
(mV/
-1.0
IC=TJ=125 250mA
-0.8 -1.2 -1.6
Base-Emitter Temperature Coefficient
Temperature Coefficient, R
VB
R -2.0 -2.4
VB for
V BE
0 I C=-10mA -0.05 -0.1-0.2 -0.5-1.0-2.0-5.0 -10 -20 -50 Base Current, I B (mA)
-2.8 -0.5 -1.0-2.0 -5.0 -10-20 -50-100-200 -500 Collector Current, IC (mA)
UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 5
QW-R206-090,A


▲Up To Search▲   

 
Price & Availability of MMBTA56

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X