View SLCS136D_1002469.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LMV331 SINGLE, LMV393 DUAL, LMV339 QUAD GENERAL-PURPOSE LOW-VOLTAGE COMPARATORS
SLCS136D - AUGUST 1999 - REVISED JUNE 2000
D D D D D
2.7-V and 5-V Performance Low Supply Current: LMV331 . . . 60 A Typ LMV393 . . . 100 A Typ LMV339 . . . 170 A Typ Input Common-Mode Voltage Range Includes Ground Low Output Saturation Voltage . . . 200 mV Typ Package Options Include Plastic Small-Outline (D), Small-Outline Transistor (SOT-23 DBV, SC-70 DCK), and Thin Shrink Small-Outline (PW) Packages
LMV339 . . . D OR PW PACKAGE (TOP VIEW)
2OUT 1OUT VCC+ 1IN- 1IN+ 2IN- 2IN+
1 2 3 4 5 6 7
14 13 12 11 10 9 8
3OUT 4OUT GND 4IN+ 4IN- 3IN+ 3IN-
LMV393 . . . D OR PW PACKAGE (TOP VIEW)
description
The LMV393 and LMV339 devices are low-voltage (2.7 V to 5.5 V) versions of the dual and quad comparators, LM393 and LM339, which operate from 5 V to 30 V. The LMV331 is the single-comparator version. The LMV331, LMV339, and LMV393 are the most cost-effective solutions for applications where low-voltage operation, low power, space saving, and price are the primary specifications in circuit design for portable consumer products. These devices offer specifications that meet or exceed the familiar LM339 and LM393 devices at a fraction of the supply current.
1OUT 1IN- 1IN+ GND
1 2 3 4
8 7 6 5
VCC+ 2OUT 2IN- 2IN+
LMV331 . . . DBV OR DCK PACKAGE (TOP VIEW)
IN+ GND IN-
1 2 3
5 4
VCC+ OUT
The LMV331 is available in the ultra-small DCK package, which is approximately one-half the size of the five-pin DBV package. The DCK package saves space on printed circuit boards and enables the design of small portable electronic devices. It also allows the designer to place the device closer to the signal source to reduce noise pickup and increase signal integrity. The LMV331I, LMV339I, and LMV393I devices are characterized for operation from -40C to 85C.
logic symbol (each comparator)
IN- IN+ _ + OUT
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright (c) 2000, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
1
LMV331 SINGLE, LMV393 DUAL, LMV339 QUAD GENERAL-PURPOSE LOW-VOLTAGE COMPARATORS
SLCS136D - AUGUST 1999 - REVISED JUNE 2000
AVAILABLE OPTIONS TA PACKAGE TYPE 5-pin SOT -40C to 85C 8-pin SOIC 8-pin TSSOP 14-pin SOIC 14-pin TSSOP PACKAGED DEVICES SINGLE LMV331IDCKR LMV331IDBVR -- -- -- -- DUAL -- -- LMV393ID LMV393IPWR -- QUADRUPLE -- -- -- -- LMV339ID LMV339IPWR
The D package is available taped and reeled. Add the suffix R to the device type (e.g., LMV393DR). The DCK, DBV, and PW packages are only available left-end taped and reeled.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, VCC+ (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Input voltage range, VI (either input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 V to 5.5 V Operating virtual junction temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 150C Package thermal impedance, JA (see Notes 3 and 4): D (8-pin) package . . . . . . . . . . . . . . . . . . . . . . 97C/W D (14-pin) package . . . . . . . . . . . . . . . . . . . . 86C/W DBV package . . . . . . . . . . . . . . . . . . . . . . . 206C/W DCK package . . . . . . . . . . . . . . . . . . . . . . . 252C/W PW (8-pin) package . . . . . . . . . . . . . . . . . . 149C/W PW (14-pin) package . . . . . . . . . . . . . . . . . . 113C/W Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or PW package . . . . . . . . . . . . . . . 260C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values (except differential voltages and VCC+ specified for the measurement of IOS) are with respect to the network GND. 2. Differential voltages are at IN+ with respect to IN-. 3. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JA. Selecting the maximum of 150C can affect reliability. 4. The package thermal impedance is calculated in accordance with JESD 51.
recommended operating conditions
MIN VCC+ TA Supply voltage (single-supply operation) Operating free-air temperature 2.7 -40 MAX 5.5 85 UNIT V C
2
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
LMV331 SINGLE, LMV393 DUAL, LMV339 QUAD GENERAL-PURPOSE LOW-VOLTAGE COMPARATORS
SLCS136D - AUGUST 1999 - REVISED JUNE 2000
electrical characteristics at specified free-air temperature, VCC+ = 2.7 V, GND = 0 V (unless otherwise noted)
PARAMETER VIO Input offset voltage Average temperature coefficient of input offset voltage Input bias current Input offset current Output current Output leakage current VICR VSAT ICC Common-mode input voltage range Saturation voltage Supply current IO 1 mA LMV331 LMV393 (both comparators) LMV339 (all four comparators) VO 1.5 V TEST CONDITIONS TA 25C -40C to 85C 25C -40C to 85C 25C -40C to 85C 25C 25C -40C to 85C 25C 25C 25C 25C 25C -0.1 to 2 200 40 70 140 100 140 200 5 23 0.003 1 5 MIN TYP 1.7 5 10 250 400 50 150 MAX 7 UNIT mV
aV
IIB
IO
mV/C
nA nA mA
IIO IO
mA
V mV
mA
switching characteristics, TA = 25C, VCC+ = 2.7 V, RL = 5.1 k, GND = 0 V (unless otherwise noted)
PARAMETER tPHL tPLH Propagation delay, high- to low-level output switching delay high low level Propagation delay, low- to high-level output switching delay low high level TEST CONDITIONS Input overdrive = 10 mV Input overdrive = 100 mV Input overdrive = 10 mV Input overdrive = 100 mV MIN TYP 1000 350 500 400 MAX UNIT ns ns
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
3
LMV331 SINGLE, LMV393 DUAL, LMV339 QUAD GENERAL-PURPOSE LOW-VOLTAGE COMPARATORS
SLCS136D - AUGUST 1999 - REVISED JUNE 2000
electrical characteristics at specified free-air temperature, VCC+ = 5 V, GND = 0 V (unless otherwise noted)
PARAMETER VIO Input offset voltage Average temperature coefficient of input offset voltage Input bias current Input offset current Output current Output leakage current VICR AVD VSAT Common-mode input voltage range Large-signal differential voltage gain Saturation voltage IO 4 mA LMV331 ICC Supply current LMV393 (both comparators) LMV339 (all four comparators) VO 1.5 V TEST CONDITIONS TA 25C -40C to 85C 25C 25C -40C to 85C 25C -40C to 85C 25C 25C -40C to 85C 25C 25C 25C -40C to 85C 25C -40C to 85C 25C -40C to 85C 25C -40C to 85C 170 100 60 20 -0.1 to 4.2 50 200 400 700 120 150 200 250 300 350 10 84 0.003 1 2 5 25 250 400 50 150 MIN TYP 1.7 MAX 7 9 UNIT mV
aV
IIB
IO
mV/C
nA nA mA
IIO IO
mA
V V/mV mV
mA
switching characteristics, TA = 25C, VCC+ = 5 V, RL = 5.1 k, GND = 0 V (unless otherwise noted)
PARAMETER tPHL tPLH Propagation delay, high- to low-level output switching delay high low level Propagation delay, low- to high-level output switching delay low high level TEST CONDITIONS Input overdrive = 10 mV Input overdrive = 100 mV Input overdrive = 10 mV Input overdrive = 100 mV MIN TYP 600 200 450 300 MAX UNIT ns ns
4
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. Customers are responsible for their applications using TI components. In order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI's publication of information regarding any third party's products or services does not constitute TI's approval, warranty or endorsement thereof.
Copyright (c) 2000, Texas Instruments Incorporated

▲Up To Search▲

Price & Availability of SLCS136D

	To Download SLCS136D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .