 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA Order Number: MC100EPT23/D Rev. 0.1, 05/1999 Semiconductor Components MC100EPT23 SO-8, D SUFFIX 8-LEAD PLASTIC SOIC PACKAGE CASE 751 ORDERING INFORMATION MC100EPT23D SOIC Product Preview Dual Differential LVPECL to LVTTL Translator PIN PIN DESCRIPTION FUNCTION LVTTL Outputs Diff LVPECL Inputs Positive Supply Ground * * * * * * * * * * * * 2.0ns Typical Propagation Delay Maximum Frequency > 275MHz Differential LVPECL Inputs Small Outline SOIC Package 24mA LVTTL Outputs Flow Through Pinouts Internal Input Resistors: Pulldown on D, Pulldown and Pullup on D Q Output will default LOW with inputs open or at GND ESD Protection: >1.2KV HBM, >150V MM Moisture Sensitivity Level 1, Indefinite Time Out of Drypack Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34 Transistor Count = 91 devices Q0, Q1 D0, D1, D0, D1 VCC GND The MC100EPT23 is a dual differential LVPECL to LVTTL translator. Because LVPECL (Positive ECL) levels are used only +3.3V and ground are required. The small outline 8-lead SOIC package and the dual gate design of the EPT23 makes it ideal for applications which require the translation of a clock and a data signal. The EPT23 is available in only the ECL 100K standard. Since there are no LVPECL outputs or an external VBB reference, the EPT23 does not require both ECL standard versions. The LVPECL inputs are differential. Therefore, the MC100EPT23 can accept any standard differential LVPECL input referenced from a VCC of +3.3V. This document contains information on a product under development. Motorola reserves the right to change or discontinue this product without notice. (c) Motorola, Inc. 1999 1 ECLinPS PlusTM MC100EPT23 D0 1 8 VCC D0 2 LVPECL LVTTL 7 Q0 D1 3 6 Q1 D1 4 5 GND Figure 1. 8-Lead Pinout and Logic Diagram MAXIMUM RATINGS* Symbol VCC VI Iout TA Tstg JA JC Tsol Parameter Power Supply (GND = 0V) Input Voltage (GND = 0V, VI not more positive than VCC) Output Current Operating Temperature Range Storage Temperature Thermal Resistance (Junction-to-Ambient) Thermal Resistance (Junction-to-Case) Solder Temperature (<2 to 3 Seconds: 245C desired) Still Air 500lfpm Continuous Surge Value 0 to 3.8 0 to 3.8 50 100 -40 to +85 -65 to +150 190 130 41 to 44 5% 265 Unit VDC VDC mA C C C/W C/W C * Maximum Ratings are those values beyond which damage to the device may occur. 2 Home Page - http://scgtomorrow.motorola.com MC100EPT23 ECLinPS PlusTM DC CHARACTERISTICS (VCC = 3.3V 0.3V; GND = 0V; TA = -40C to 85C) Symbol ICCH ICCL VIH VIL IIH IIL VOH VOL IOS Characteristic Power Supply Current (Outputs set to HIGH) Power Supply Current (Outputs set to LOW) Input HIGH Voltage (VCC = 3.3) (Note 1.) Input LOW Voltage (VCC = 3.3) (Note 1.) Input HIGH Current Input LOW Current Output HIGH Voltage (IOH = -3.0mA) (Note 2.) Output LOW Voltage (IOL = 24mA) (Note 2.) Output Short Circuit Current -80 D D 0.5 -150 2.4 0.5 -130 Min TBD TBD 2135 1490 Typ 20 28 Max TBD TBD 2420 1825 150 Unit mA mA mV mV A A V V mA VIHCMR Input HIGH Voltage Common Mode Range (Note 3.) 2.0 3.3 V NOTE: 100EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. 1. All values vary 1:1 with VCC. 2. All loading with 500 ohms to GND, CL = 20pF. 3. VIHCMR min varies 1:1 with GND, max varies 1:1 with VCC. AC CHARACTERISTICS (VCC = 3.3V 0.3V; GND = 0V) -40C Symbol fmax tPLH, tPHL tSK+ + tSK- - tSKPP tJITTER VPP Characteristic Maximum Toggle Frequency (Note 4.) Propagation Delay to Output Differential Output-to-Output Skew++ Output-to-Output Skew- - Part-to-Part Skew (Note 5.) Cycle-to-Cycle Jitter Input Voltage Swing (Differential) (Note 6.) 100 Min 275 1.0 1.0 1.7 1.4 60 25 500 TBD 800 1200 100 Typ Max Min 275 1.0 1.0 1.7 1.4 60 25 500 TBD 800 1200 100 330 25C Typ Max Min 275 1.0 1.0 1.7 1.4 60 25 500 TBD 800 1200 700 85C Typ Max Unit MHz ns ps ps mV ps tr Output Rise/Fall Times 330 700 330 700 tf (20% - 80%) Q, Q 4. Fmax guaranteed for functionality only. VOL and VOH levels are guaranteed at DC only. 5. Skews are measured between outputs under identical transitions. 6. 200mV input guarantees full logic swing at the output. Home Page - http://scgtomorrow.motorola.com 3 ECLinPS PlusTM MC100EPT23 OUTLINE DIMENSIONS SO-8, D SUFFIX PLASTIC SOIC PACKAGE CASE 751-06 ISSUE T A 8 D 5 C E 1 4 H 0.25 M B M h B C e A SEATING PLANE X 45 _ NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETER. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A A1 B C D E e H h L MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 0.35 0.49 0.19 0.25 4.80 5.00 3.80 4.00 1.27 BSC 5.80 6.20 0.25 0.50 0.40 1.25 0_ 7_ q L 0.10 A1 B 0.25 M CB S A S q Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 Customer Focus Center: 1-800-521-6274 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 1-602-244-6609 ASIA / PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, Motorola Fax Back System - US & Canada ONLY 1-800-774-1848 2, Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. - http://sps.motorola.com/mfax/ 852-26629298 HOME PAGE: http://motorola.com/sps/ JAPAN: Motorola Japan Ltd.; SPD, Strategic Planning Office, 141, 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan. 81-3-5487-8488 4 Home Page - http://scgtomorrow.motorola.com MC100EPT23/D |
Price & Availability of ON0499
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |