 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MILITARY DATA SHEET MNLM140-05-K REV 0C0 THREE TERMINAL POSITIVE REGULATORS General Description The LM140 monolithic 3-terminal positive voltage regulators employ internal current-limiting, thermal shutdown and safe-area compensation, making them essentially indestructible. If adequate heat sinking is provided, they can deliver over 1.0A output current. They are intended as fixed voltage regulators in a wide range of applications including local (on-card) regulation for elimination of noise and distribution problems associated with single-point regulation. In addition to use as fixed voltage regulators, these devices can be used with external components to obtain adjustable output voltages and currents. Considerable effort was expended to make the entire series of regulators easy to use and to minimize the number of external components. It is not necessary to bypass the output, although this does improve transient response. Input bypassing is needed only if the regulator is located far from the filter capacitor of the power supply. Original Creation Date: 05/19/95 Last Update Date: 12/10/96 Last Major Revision Date: 05/19/95 Industry Part Number LM140 NS Part Numbers LM140K-5.0/883 Prime Die LM140 Processing MIL-STD-883, Method 5004 Subgrp Description 1 2 3 4 5 6 7 8A 8B 9 10 11 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 Quality Conformance Inspection MIL-STD-883, Method 5005 1 MNLM140-05-K REV 0C0 MILITARY DATA SHEET Features Complete specifications at 1A load Internal thermal overload protection Internal short-circuit current limit Output transistor safe area protection 2 MNLM140-05-K REV 0C0 MILITARY DATA SHEET (Absolute Maximum Ratings) (Note 1) DC Input Voltage 35V Internal Power Dissipation (Note 2) Internally Limited Maximum Junction Temperature 150 C Storage Temperature -65 C to +150 C Lead Temperature (Soldering, 10 seconds) ESD Susceptibility (Note 3) 300 C 2kV Note 1: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Conditions are conditions under which the device functions but the specification might not be guaranteed. For guaranteed specifications and test conditions see the Electrical Characteristics The Maximum allowable power dissipation at any ambient temperature is a function of the maximum junction temperature for operation (TjMAX = 150 C), the junction-to-ambient thermal resistance (ThetaJA), and the ambient temperature (TA), PDMAX - (TjMAX - TA)/ThetaJA. If this dissipation is exceeded, the die temperature will rise above TjMAX and the electrical specifications do not apply. If the die temperature rises above 150 C, the device will go into thermal shutdown. The junction-to-ambient thermal resistance (ThetaJA) is 39 C/W. When using a heatsink, ThetaJA is the sum of the 4 C/W junction-to-case thermal resistance (ThetaJC) and the case-to-ambient thermal resistance (ThetaCA) of the heatsink. Human body model, 100pF discharged through 1.5K Ohms. Note 2: Note 3: Recommended Operating Conditions (Note 1) Temperature Range (TA) (Note 2) -55C to +125 C Note 1: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Conditions are conditions under which the device functions but the specifications might not be guaranteed. For guaranteed specifications and test conditions see the Electrical Characteristics. The Maximum allowable power dissipation at any ambient temperature is a function of the maximum junction temperature for operation (TjMAX = 150 C), the junction-to-ambient thermal resistance (ThetaJA), and the ambient temperature (TA). PDMAX = (TjMAX - TA)/ThetaJA. If this dissipation is exceeded, the die temperature will rise above TjMAX and the electrical specifications do not apply. If the die temperature rises above 150 C, the device will go into thermal shutdown. The junction-to-ambient thermal resistance (ThetaJA) is 39 C/W. When using a heatsink, ThetaJA is the sum of the 4 C/W junction-to-case thermal resistance (ThetaJC) and the case-to-ambient thermal resistance (ThetaCA) of the heatsink. Note 2: 3 MNLM140-05-K REV 0C0 MILITARY DATA SHEET Electrical Characteristics DC PARAMETERS: PRE-BURN-IN STRESS TEST PER (SG)RPI-3-371 (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vin = 10V, Il = 5mA SYMBOL Iq PARAMETER Quiescent Current Il = 1A CONDITIONS NOTES PINNAME MIN 6 7 Delta Iq Quiescent Current Change Il = 1A, 8V <= Vin <= 20mA Il <= 500mA, 8V <= Vin <= 25V 5mA, <= Il <= 1.0A Vout Output Voltage Vin = 8V Vin = 8V, Il = 1A Vin = 20V Vin = 20V, Il = 1A Rline Line Regulation Il = 500mA, 7V <= Vin <= 25V Il = 1A, 7.3V <= Vin <= 20V Il = 1A, 8.0V <= Vin <= 20V Il = 1A, 8V <= Vin <= 12V Rload Load Regulation 5mA <= Il <= 1.5A 5mA <= Il <= 1.0A 250mA <= Il <= 750mA Ios Current Limit Vin = 35V ThetaJC ThetaCA Thermal Resistance Thermal Resistance Junction to Case Case to Ambient 1 1 -0.8 -0.8 -0.5 4.80 4.75 4.75 4.75 4.75 -50 -50 -50 -25 -50 -50 -25 -4.0 -2.0 0.8 0.8 0.5 5.20 5.25 5.25 5.25 5.25 50 50 50 25 50 50 25 -0.02 -0.02 4 35 MAX UNIT mA mA mA mA mA V V V V V mV mV mV mV mV mV mV A A C/W C/W SUBGROUPS 1 2, 3 1 1, 2, 3 1, 2, 3 1 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1 2, 3 1, 2, 3 1 2, 3 1 1 1 1 1 AC PARAMETERS: (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Vin = 10V, Il = 5mA Rr Ripple Rejection f = 120Hz, Il = 350mA, ein = 1V RMS 68 dB 4 4 MNLM140-05-K REV 0C0 MILITARY DATA SHEET Electrical Characteristics DC PARAMETERS: DRIFT VALUES (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vin = 10V, Il = 5mA. "Deltas not required on B-Level product. Deltas required for S-Level product ONLY as specified on Internal Processing Instructions (IPI)." SYMBOL Iq Vout PARAMETER Quiescent Current Output Voltage Note 1: Guaranteed parameter not tested. Il = 1A CONDITIONS NOTES PINNAME MIN -1.2 MAX 1.2 UNIT mA V SUBGROUPS 1 1 -0.025 0.025 5 MNLM140-05-K REV 0C0 MILITARY DATA SHEET Graphics and Diagrams GRAPHICS# 9482HRA1 K02CRC P000031A DESCRIPTION METAL CAN(KA),TO-3,2LD,LOW PROFILE (B/I CKT) METAL CAN(KA),TO-3,2LD,LOW PROFILE (P/P DWG) METAL CAN(KA),TO-3,2LD,LOW PROFILE(PIN OUT) See attached graphics following this page. 6 |
Price & Availability of NSC05434
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |