 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MILITARY DATA SHEET MNDS96F172M-W REV 1B0 Original Creation Date: 06/19/95 Last Update Date: 10/21/96 Last Major Revision Date: 06/19/95 RS-485 COMPARABLE QUAD DIFFERENTIAL DRIVER General Description The DS96F172 is a high speed quad differential line driver designed to meet EIA Standards RS-485. It offers improved performance due to the use of new state-of-the-art L-FAST bipolar technology. The L-FAST technology allows for higher speeds and lower currents by utilizing extremely short gate delay times. The DS96F172 has wide positive and negative common mode range for multipoint applications in noisy environments. Positive and negative current-limiting is provided to protect the driver from line fault conditions over +12V to -7V common mode range. The DS96F172 features an active high and active low Enable common to all four drivers. Industry Part Number DS96F172 NS Part Numbers DS96F172MW-MIL Prime Die DS96M172 Controlling Document 5962-9076501 Processing MIL-STD-883, Method 5004 Subgrp Description 1 2 3 4 5 6 7 8A 8B 9 10 11 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 Quality Conformance Inspection MIL-STD-883, Method 5005 1 MNDS96F172M-W REV 1B0 MILITARY DATA SHEET (Absolute Maximum Ratings) Supply Voltage 7.0V Enable Input Voltage 5.5V Maximum Power Dissipation at 25 deg c: (Note 1) W pkg Storage Temperature Range Lead Temperature Ceramic Dip (Soldering, 60 sec.) Note 1: Derate W Pkg 7.1 mW/C above 25C. 1000mW -65 C to + 175 C 300 C Recommended Operating Conditions Output Current Low (Iol) 60mA Output Current High (Ioh) -60mA Supply Voltage (Vcc) Min=4.50V, Typ=5.0V, Max=5.5V Common Mode Output Voltage (Voc) Min=-7.0V, Max=+12.0V Operating Temperature (Ta) Min=-55,Typ=+25,Max=+125c 2 MNDS96F172M-W REV 1B0 MILITARY DATA SHEET Electrical Characteristics DC PARAMETERS: (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC = 5.5V SYMBOL VIL PARAMETER Logical 0 Input Voltage Logical 1 Input Voltage Input Clamp Voltage Differential Output Voltage Differential Output Voltage Differential Output Voltage Change In Magnitude of (VOD2) Change In Magnitude of (VOD2) Common Mode Output Voltage Common Mode Output Voltage Change in Magnitude of VOC Change in Magnitude of VOC Output Current With Power Off High Impedance State Output Current Logical 1 Input Current Logical 0 Input Current Supply Current Supply Current I = -18mA IO = 0mA VCC = 4.5V, RL = 54 ohms 1 VOD2 (2) Delta VOD (1) Delta VOD (2) VOC (1) VOC (2) Delta VOC (1) Delta VOC (2) IO IOZ VCC = 4.5V, RL = 100 ohms VCC = 4.5V, RL = 54 ohms 1 VCC = 4.5V, RL = 100 ohms 1 RL = 54 ohms RL = 100 ohms VCC = 4.5V, RL = 54 ohms VCC = 4.5V, RL = 100 ohms VCC = 0V, VO = -7V to 12V VO = -7V to 12V -200 -200 -50 -50 1.5 1.2 2.0 -200 -400 -200 -400 200 400 200 400 3 3 200 200 50 50 2 -1.5 6 CONDITIONS NOTES PINNAME MIN MAX 0.8 0.7 VIH VIC VOD1 VOD2 (1) UNIT V V V V V V V V mV mV mV mV V V mV mV uA uA SUBGROUPS 1 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2 3 1, 2, 3 1, 2 3 1, 2 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 IIH IIL ICC ICCX VI = 2.4V VI = 0.4V Outputs Enabled Outputs Disabled -50 20 uA uA 50 30 mA mA 3 MNDS96F172M-W REV 1B0 MILITARY DATA SHEET Electrical Characteristics DC PARAMETERS:(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC = 5.5V SYMBOL IOS (1) IOS (2) IOS (3) IOS (4) PARAMETER Short Circuit Output Current Short Circuit Output Current Short Circuit Output Current Short Circuit Output Current VO = -7V VO = 0V VO = VCC VO = 12V CONDITIONS NOTES 2 2 2 2 PINNAME MIN -250 -150 150 250 MAX UNIT mA mA mA mA SUBGROUPS 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 AC PARAMETERS: (The following conditions apply to all the following parameters, unless otherwise specified.) AC: VCC = 5.0V tPLH Propagation Delay Lo to Hi Level Propagation Delay Hi to Lo Level Output to Output Delay Time Output Disable Time From Low Level Output EnableTime to Low Level Output EnableTime to High Level Differential Output Delay Time Differential Output Transition Time Note 1: Note 2: RL = 27 ohms, CL = 15pF 25 16 RL = 27 ohms, CL = 15pF 25 16 RL = 60 ohms 10 4 tLZ RL = 110 ohms, CL = 50pF 40 25 RL = 110 ohms, CL = 50pF 100 40 tZH RL = 110 ohms, CL = 50pF 40 32 tDD RL = 60 ohms, CL = 15pF 30 22 tTD RL = 60 ohms, CL = 15pF 40 22 ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 10, 11 9 10, 11 9 10, 11 9 10, 11 9 10, 11 9 10, 11 9 10, 11 9 10, 11 9 tPHL SKEW tZL -55C Limit exceeds EIA standard RS-485 Spec. .2uF cap is connected between the output and GND to reduce oscilation. 4 MNDS96F172M-W REV 1B0 MILITARY DATA SHEET Graphics and Diagrams GRAPHICS# W16ARL CERPAC (W), 16 LEAD (P/P DWG) DESCRIPTION See attached graphics following this page. 5 |
Price & Availability of NSC05256
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |