Part Number Hot Search : 
TS4B02G 4LE605 C100L C9104 5PE40 M74VH SM4T10AY A3020
Product Description
Full Text Search
 

To Download NJU6363SERIES Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 NJU6363 Series
Low Operating Current Fundamental Quartz Crystal Oscillator
sGENERAL DESCRIPTION The NJU6363 series is a C-MOS fundamental quartz crystal oscillator that consists of an oscillation amplifier, 3-stage divider and 3-state output buffer. The 3-stage divider generates only one frequency selected of f0,f0/2,f0/4 f0/8, f0/16 and f0/32 by internal circuits is output. The oscillation amplifier is realized very low stand-by current using NAND circuit. The 3-state output buffer is C-MOS compatible. sPACKAGE OUTLINE
NJU6363XC-D
sFEATURES qLow Operating Current 1mA @1.8V qOperating Voltage 1.5 to 3.6V qMaximum Oscillation Frequency 40MHz @1.5V qHigh Fan-out IOH/IOL=1mA @1.8V q3-Stage Divider Maximum Divider f0/32 qOscillation Stop and Output Stand-by Function q3-State Output Buffer qOscillation Capacitors Cg and Cg on-chip qPackage Outline Thin-Chip qC-MOS Technology LINE-UP TABLE Type No. A B C D E F FOUT f0 f0/2 f0/4 f0/8 f0/16 f0/32 Internal Connect Connected A Line Connected B Line Connected C Line Connected D Line Connected E Line Connected F Line Cg/Cd 8/9 8/9 8/9 8/9 8/9 8/9
sPAD LOCATION
Thin-Chip
CONT XT XT VSS
VDD FOUT
COORDINATES No 1 2 3 4 5 6 Pad Name X -178 -178 -178 -178 206 206 Y 231 77 -77 -231 -231 231
CONT
XT
NJU6363
XT
VSS FOUT VDD
Starting Point:Chip Center Unit[um] Chip Size:0.7x0.75mm Thin-Chip Thickness(-D):20020um Pad Size:90x90um sBLOCK DIAGRAM
VDD
XT
VSS
Rf
XT
1/ 2 1/ 2 1/ 2 1/ 2 1/ 2
Cg
Cd A B
C D E F
3 - STATE BUFFER
FOUT
CONT
2003/03/07 ( 1 / 6 )
NJU6363 Series
sTREMINAL DESCRIPTION SYMBOL FUNCTION Oscillation and 3-state Output Buffer Control FOUT CONT Output either one frequency selected of f0, CONT H or OPEN f0/2,f0/4,f0/8, f0/16 and f0/32 Note1) L Oscillation Stop and High impedance Output Quartz Crystal Connecting Terminals XT VSS VSS=0V FOUT Frequency Output VDD VDD=1.8/2.5V/3.3V Note1) Refer to the line-up table. sABSOLUTE MAXIMUM RATINGS (Ta=25C) PARAMETER SYMBOL RATING UNIT Supply Voltage VDD -0.5 to +7.0 V Input Voltage VIN VSS-0.5 to VDD+0.5 V Output Voltage VO -0.5 to VDD+0.5 V Input Current IIN mA 10 Output Current IO mA 25 Operating Temperature Range Topr -40 to +85 C Storage Temperature Range Tstg -55 to +125 C Note2) If the supply voltage(VDD) is less than 7.0V, the input voltage must not over the VDD level though 7.0V is limit specified. Note3) Decupling capacitor should be connected between VDD and VSS due to the stabilized operation for the circuit. XT
2003/03/07 ( 2 / 6 )
NJU6363 Series
sELECTRICAL CHARACTERISTICS PARAMETER Operating Voltage SYMBOL VDD CONDITIONS MIN 1.5 TYP (Ta=25C) MAX UNIT 3.6 V (VDD=1.8V,Ta=25C) MAX UNIT 1 1 1 mA 1 1 1 3 1 1.8 0.54 uA uA V V mA mA uA uA uA k pF MHz 50 5 5 55 10 10 250 250 % ns ns ns ns
PARAMETER
SYMBOL
Operating Current
IDD
CONDITIONS A version,fosc=16MHz,CL=5pF B version,fosc=16MHz,CL=5pF C version,fosc=16MHz,CL=5pF D version,fosc=16MHz,CL=5pF E version,fosc=16MHz,CL=5pF F version,fosc=16MHz,CL=5pF
MIN
TYP
Oscillation Stopping Current Stand-by Current Input Voltage Output Current Input Current 3-state Off Leakage Current Feedback Resistance Internal Capacitor Maximum Oscillation Frequency Output Signal Symmetry Output Signal Rise Time Output Signal Fall Time Output Disable time Output Enable Time Note4)
ISTB Ist VIH VIL IOH IOL IIN IOZ Rf Cg/Cd FMAX SYM tr tf TPLZ TPZL
CONT =VSS, No load CONT =XT=VSS, No load
Note4) 1.26 0 1.2 1.2
1
VOH=1.62V VOL=0.18V
CONT =0.8VDD CONT =0.2VDD CONT =VSS, FOUT= VDD or VSS
fosc=16MHz 40 CL=5pF, @VDD/2 CL=5pF,10% to 90% CL=5pF,90% to 10% CL=5pF,RUP=10k CL=5pF,RUP=10k 45
3.0 0.5
4.5 0.7 0.1
255 8/9
Excluding input current on CONT Terminal.
2003/03/07 ( 3 / 6 )
NJU6363 Series
PARAMETER SYMBOL CONDITIONS A version,fosc=16MHz,CL=5pF B version,fosc=16MHz,CL=5pF C version,fosc=16MHz,CL=5pF D version,fosc=16MHz,CL=5pF E version,fosc=16MHz,CL=5pF F version,fosc=16MHz,CL=5pF MIN TYP (VDD=2.5V,Ta=25C) MAX UNIT 2 1.5 1 mA 1 1 1 5 1 2.5 0.75 uA uA V V mA mA uA uA uA k pF MHz 50 4 4 55 8 8 200 200 % ns ns ns ns
Operating Current
IDD
Oscillation Stopping Current Stand-by Current Input Voltage Output Current Input Current 3-state Off Leakage Current Feedback Resistance Internal Capacitor Maximum Oscillation Frequency Output Signal Symmetry Output Signal Rise Time Output Signal Fall Time Output Disable time Output Enable Time Note4)
ISTB Ist VIH VIL IOH IOL IIN IOZ Rf Cg/Cd FMAX SYM tr tf TPLZ TPZL
CONT =VSS, No load CONT =XT=VSS, No load
Note4) 1.75 0 3 3
2
VOH=2.25V VOL=0.25V
CONT =0.8VDD CONT =0.2VDD CONT =VSS, FOUT= VDD or VSS
fosc=16MHz 40 CL=5pF, @VDD/2 CL=5pF,10% to 90% CL=5pF,90% to 10% CL=5pF,RUP=10k CL=5pF,RUP=10k 45
7.5 1.2
12.0 2.0 0.1
255 8/9
Excluding input current on CONT Terminal.
2003/03/07 ( 4 / 6 )
NJU6363 Series
PARAMETER SYMBOL CONDITIONS A version,fosc=16MHz,CL=5pF B version,fosc=16MHz,CL=5pF C version,fosc=16MHz,CL=5pF D version,fosc=16MHz,CL=5pF E version,fosc=16MHz,CL=5pF F version,fosc=16MHz,CL=5pF MIN (VDD=3.3V,Ta=25C) TYP MAX UNIT 2.5 2 1.5 mA 1.5 1.5 1.5 2 Note4) 2.31 0 5 5 10.0 1.8 5 1 3.3 0.99 uA uA V V mA mA uA uA uA k pF MHz 50 3 3 55 6 6 150 150 % ns ns ns ns
Operating Current
IDD
Oscillation Stopping Current Stand-by Current Input Voltage Output Current Input Current 3-state Off Leakage Current Feedback Resistance Internal Capacitor Maximum Oscillation Frequency Output Signal Symmetry Output Signal Rise Time Output Signal Fall Time Output Disable time Output Enable Time Note4)
ISTB Ist VIH VIL IOH IOL IIN IOZ Rf Cg/Cd FMAX SYM tr tf TPLZ TPZL
CONT =VSS, No load CONT =XT=VSS, No load
VOH=2.97V VOL=0.33V
CONT =0.8VDD CONT =0.2VDD CONT =VSS, FOUT= VDD or VSS
fosc=16MHz 60 CL=5pF, @VDD/2 CL=5pF,10% to 90% CL=5pF,90% to 10% CL=5pF,RUP=10k CL=5pF,RUP=10k 45
15.0 3.0 0.1
255 8/9
Excluding input current on CONT Terminal.
2003/03/07 ( 5 / 6 )
NJU6363 Series
sMEASURMENT CIRCUITS (1)Output Signal Symmetry(CL=5pF)
Pulse Generator
1000pF XT 50
VDD FOUT CL=5pF H L 1/2VDD
VSS
(2)Output Signal Rise/Fall Time(CL=5pF)
Pulse Generator
1000pF XT 50
VDD FOUT CL=5pF tr tf
90% 50% 10%
VSS
(3)Output Disable/Enable Time(CL=5pF,RUP=10k)
VDD XT Pulse Generator 50 CONT VSS FOUT
RUP=10k CONT CL=5pF FOUT 0.2VDD TPLZ VOL
0.8VDD TPZL VOH
[CAUTION] The specifications on this data book are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this data book are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights.
2003/03/07 ( 6 / 6 )


▲Up To Search▲   

 
Price & Availability of NJU6363SERIES

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X