View MN101C08C_991688.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MN101C08C
Type ROM (x8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time
MN101C08C 48 K (External memory can be expanded) 1.5 K (External memory can be expanded) QFP084-P-1818E *Lead-free 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.238 s (at 2.7 V to 5.5 V, 8.39 MHz) 1.00 s (at 2.0 V to 5.5 V, 2 MHz)* 125 s (at 2.0 V to 5.5 V, 32.768 kHz)* * The lower limit for operation guarantee for EPROM built-in type is 2.7 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 4 * Timer 5 * Time base * Serial 0 * Serial 1 * Automatic transfer finish * A/D conversion finish Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier) Clock source ********************* 1/1, 1/4 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/16, 1/64 of system clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave/8-bit PWM output, event count, synchronous output event) Clock source ********************* 1/1, 1/4 of system clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 4 : 16-bit x 1 (square-wave/16-bit PWM output, event count, synchronous output event, input capture) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 4 Time base timer (one-minute count setting, independently operable 8-bit timer counter 5) Clock source ********************* 1/4 of system clock frequency; 1/1, 1/8192 of OSC oscillation clock frequency; 1/1, 1/8192 of XI oscillation clock frequency Interrupt source **************** coincidence with compare register 5; 1/8192 prescaler overflow Watchdog timer Interrupt source **************** 1/65536, 1/262144, 1/1048576 of system clock frequency (ROM option)
Interrupts
Timer Counter
Serial Interface
Serial 0 : synchronous type/simple UART (half-duplex) x 1 Clock source ********************* 1/2, 1/4, 1/16 of system clock frequency; output of timer counter 3 Serial 1 : synchronous type x 1 Clock source ********************* 1/2, 1/8, 1/64 of system clock frequency; output of timer counter 3
1
MAD00010DEM
MN101C08C
I/O Pins A/D Inputs D/A Outputs Special Ports
I/O Input
55 13
* Common use * Specified pull-up resistor available * Input/output selectable (bit unit) * Common use * Specified pull-up resistor available
10-bit x 8-ch. (with S/H) 8-bit x 4-ch. Buzzer output, remote control carrier signal output, high-current drive port
Electrical Characteristics
Supply current
Limit Parameter Symbol IDD1 IDD2 Supply current at HALT IDD3 fx = 32.768 kHz, VDD = 3 V, Ta = 85C VDD = 5 V, Ta = 25C Supply current at STOP IDD4 VDD = 5 V, Ta = -40C to +85C 20 1 30 Condition min Operating supply current fosc = 20 MHz, VDD = 5 V fx = 32.768 kHz, VDD = 3 V fx = 32.768 kHz, VDD = 3 V, Ta = 25C typ 25 30 4 max 60 100 8 mA A A A A A Unit
Pin Assignment
P47,KEY7 P46,KEY6 P45,KEY5 P44,KEY4 P43,KEY3 P42,KEY2 P41,KEY1 P40,KEY0 P54,A17 P53,A16 P50,WE DAVSS
43
P51,RE
P52,CS
P63,A3
P62,A2
P61,A1
P60,A0
N.C.
P35
45
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
P64,A4 P65,A5 P66,A6 P67,A7 P70,A8 P71,A9 P72,A10 P73,A11 P74,A12 P75,A13 P76,A14 P77,A15 N.C. P87,LED7,D7 P86,LED6,D6 P85,LED5,D5 P84,LED4,D4 P83,LED3,D3 P82,LED2,D2 P81,LED1,D1 P80,LED0,D0
64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84
44
P34
42 41 40 39 38 37 36 35 34
DA3,P33 DA2,P32 DA1,P31 DA0,P30 DAVDD IRQ4,P24 IRQ3,P23 IRQ2,P22 SENS,IRQ1,P21 IRQ0,P20 N.C. TM4IO,P14 TM3IO,P13 TM2IO,P12 TM1IO,P11 RMOUT,TM0IO,P10 RST,P27 DK,BUZZER,P06 SBT1,P05 SBI1,P04 SBO1,P03
MN101C08C
33 32 31 30 29 28 27 26 25 24 23 22
10
11
12
13
14
15
16
17
18
19
20
RXD,SBI0,P01
QFP084-P-1818E
*Lead-free
TXD,SBO0,P00
SBT0,P02
VREF-
AN0,PA0
AN1,PA1
AN2,PA2
AN3,PA3
AN4,PA4
AN5,PA5
AN6,PA6
AN7,PA7
VREF+
VDD
N.C.
OSC2
OSC1
VSS
XI
XO
MMOD
21
1
2
3
4
5
6
7
8
9
See the next page for support tool.
MAD00010DEM
2
Support Tool
In-circuit Emulator EPROM Built-in Type
PX-ICE101C / D + PX-PRB101C08-QFP084-P-1818E Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CP08CBF 48 K 1.5 K 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.238 s (at 2.7 V to 5.5 V, 8.39 MHz) Package QFP084-P-1818E *Lead-free
3
MAD00010DEM
MN101C08C
MAD00010DEM
4
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
2002 JUL

▲Up To Search▲

Price & Availability of MN101C08C

	To Download MN101C08C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .