View LM139_988361.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LM139, LM139A, LM239, LM239A, LM339, LM339A, LM2901, LM2901V QUAD DIFFERENTIAL COMPARATORS
SLCS006L - OCTOBER 1979 - REVISED JUNE 2004
D Single Supply or Dual Supplies D Wide Range of Supply Voltage:
- Max Rating . . . 2 V to 36 V - Tested to 30 V . . . Non-V Devices - Tested to 32 V . . . V-Suffix Devices Low Supply-Current Drain Independent of Supply Voltage . . . 0.8 mA Typ Low Input Bias Current . . . 25 nA Typ Low Input Offset Current . . . 3 nA Typ (LM139) Low Input Offset Voltage . . . 2 mV Typ Common-Mode Input Voltage Range Includes Ground Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage . . . 36 V Low Output Saturation Voltage Output Compatible With TTL, MOS, and CMOS
LM139, LM139A . . . D, J, OR W PACKAGE LM239 . . . D, N, OR PW PACKAGE LM239A . . . D PACKAGE LM339, LM339A . . . D, DB, N, NS, OR PW PACKAGE LM2901 . . . D, N, NS, OR PW PACKAGE (TOP VIEW)
D D D D D D D D
1OUT 2OUT VCC 2IN- 2IN+ 1IN- 1IN+
1 2 3 4 5 6 7
14 13 12 11 10 9 8
OUT3 OUT4 GND 4IN+ 4IN- 3IN+ 3IN-
LM139, LM139A . . . FK PACKAGE (TOP VIEW)
2OUT 1OUT NC 3OUT 4OUT VCC NC 2IN- NC 2IN+
3 4 5 6 7 8 2 1 20 19 18 17 16 15 14 9 10 11 12 13
description/ordering information
These devices consist of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.
GND NC 4IN+ NC 4IN-
NC - No internal connection
The LM139 and LM139A are characterized for operation over the full military temperature range of -55C to 125C. The LM239 and LM239A are characterized for operation from -25C to 125C. The LM339 and LM339A are characterized for operation from 0C to 70C. The LM2901 is characterized for operation from -40C to 125C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
On products compliant to MIL PRF 38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.
Copyright 2004, Texas Instruments Incorporated
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
1IN- 1IN+ NC 3IN- 3IN+
1
SLCS006L - OCTOBER 1979 - REVISED JUNE 2004
LM139, LM139A, LM239, LM239A, LM339, LM339A, LM2901, LM2901V QUAD DIFFERENTIAL COMPARATORS
description/ordering information (continued)
ORDERING INFORMATION
TA VIOmax AT 25C MAX VCC PDIP (N) SOIC (D) 5 mV 30 V SOP (NS) SSOP (DB) TSSOP (PW) 0C to 70C PDIP (N) SOIC (D) 2 mV 30 V SOP (NS) SSOP (DB) TSSOP (PW) PDIP (N) SOIC (D) TSSOP (PW) 2 mV 30 V SOIC (D) PDIP (N) SOIC (D) 7 mV -40C to 125C 30 V SOP (NS) TSSOP (PW) SOIC (D) 7 mV 2 mV 32 V 32 V TSSOP (PW) SOIC (D) TSSOP (PW) PACKAGE Tube of 25 Tube of 50 Reel of 2500 Reel of 2000 Reel of 2000 Tube of 90 Reel of 2000 Tube of 25 Tube of 50 Reel of 2500 Reel of 2000 Reel of 2000 Tube of 90 Reel of 2000 Tube of 25 Tube of 50 5 mV -25 C 85C -25C to 85 C 30 V Reel of 2500 Tube of 90 Reel of 2000 Tube of 50 Reel of 2500 Tube of 25 Tube of 50 Reel of 2500 Reel of 2000 Tube of 90 Reel of 2000 Reel of 2500 Reel of 2000 Reel of 2500 Reel of 2000 ORDERABLE PART NUMBER LM339N LM339D LM339DR LM339NSR LM339DBR LM339PW LM339PWR LM339AN LM339AD LM339ADR LM339ANSR LM339ADBR LM339APW LM339APWR LM239N LM239D LM239DR LM239PW LM239PWR LM239AD LM239ADR LM2901N LM2901D LM2901DR LM2901NSR LM2901PW LM2901PWR LM2901VQDR LM2901VQPWR LM2901AVQDR LM2901AVQPWR L2901 L2901V L2901V L2901AV LM2901 LM2901 LM239A LM2901N L239 LM239 L339A LM239N LM339A LM339A L339A L339 LM339AN LM339 LM339 LM339 TOP-SIDE MARKING LM339N
L2901AV Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.
2
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
LM139, LM139A, LM239, LM239A, LM339, LM339A, LM2901, LM2901V QUAD DIFFERENTIAL COMPARATORS
SLCS006L - OCTOBER 1979 - REVISED JUNE 2004
description/ordering information (continued)
ORDERING INFORMATION
TA VIOmax AT 25C MAX VCC CFP (W) CDIP (J) 5 mV 30 V LCCC (FK) SOIC (D) -55C to 125C CFP (W) CDIP (J) 2 mV 30 V LCCC (FK) SOIC (D) PACKAGE Tube of 25 Tube of 25 Tube of 55 Tube of 50 Reel of 2500 Tube of 25 Tube of 25 Tube of 55 Tube of 50 Reel of 2500 ORDERABLE PART NUMBER LM139W LM139J LM139FK LM139D LM139DR LM139AW LM139AJ LM139AFK LM139AD LM139ADR LM139D LM139AW LM139AJ LM139AFK LM139AD TOP-SIDE MARKING LM139W LM139J LM139FK
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.
symbol (each comparator)
IN+ OUT IN-
schematic (each comparator)
VCC 80-A Current Regulator 10 A 60 A 10 A 80 A
IN+ OUT IN-
GND All current values shown are nominal.
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
3
SLCS006L - OCTOBER 1979 - REVISED JUNE 2004
LM139, LM139A, LM239, LM239A, LM339, LM339A, LM2901, LM2901V QUAD DIFFERENTIAL COMPARATORS
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V Input voltage range, VI (either input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 V to 36 V Output voltage, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA Duration of output short circuit to ground (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited Package thermal impedance, JA (see Notes 4 and 5): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86C/W DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . 96C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . 76C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . 113C/W Package thermal impedance, JC (see Notes 6 and 7): FK package . . . . . . . . . . . . . . . . . . . . . . . . . 5.61C/W J package . . . . . . . . . . . . . . . . . . . . . . . . . 15.05C/W W package . . . . . . . . . . . . . . . . . . . . . . . . 14.65C/W Operating virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150C Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J package . . . . . . . . . . . . . . . . . . . . . 300C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to network ground. 2. Differential voltages are at IN+ with respect to IN-. 3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction. 4. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JA. Operating at the absolute maximum TJ of 150C can affect reliability. 5. The package thermal impedance is calculated in accordance with JESD 51-7. 6. Maximum power dissipation is a function of TJ(max), JC, and TC. The maximum allowable power dissipation at any allowable case temperature is PD = (TJ(max) - TC)/JC. Operating at the absolute maximum TJ of 150C can affect reliability. 7. The package thermal impedance is calculated in accordance with MIL-STD-883.
4
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
LM139, LM139A, LM239, LM239A, LM339, LM339A, LM2901, LM2901V QUAD DIFFERENTIAL COMPARATORS
SLCS006L - OCTOBER 1979 - REVISED JUNE 2004
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER TEST CONDITIONS VCC = 5 V to 30 V, VIC = VICR(min), VO = 1.4 V VO = 1.4 V VO = 1.4 V TA 25C Full range 25C IIO IIB Input offset current Input bias current Full range 25C Full range 25C Full range VCC = 7.5 V, VO = -5 V to 5 V VID = 1 V VID = -1 V, VID = -1 V, VO = 2.5 V, VOH = 5 V VOH = 30 V IOL = 4 mA VOL = 1.5 V No load 0 to VCC-1.5 0 to VCC-2 200 0.1 1 150 400 700 6 16 0.8 2 6 16 0.8 2 150 -25 3 LM139 MIN TYP 2 MAX 5 9 25 100 -100 -300 0 to VCC-1.5 0 to VCC-2 50 200 0.1 1 400 700 mV mA mA -25 3 MIN LM139A TYP 1 MAX 2 mV 4 25 100 -100 -300 nA nA UNIT
VIO
Input offset voltage
VICR
Common-mode input-voltage range Large-signal differential-voltage amplification High-level output current Low-level output voltage Low-level output current Supply current (four comparators)
V
AVD
25C 25C Full range 25C Full range 25C 25C
V/mV nA A
IOH VOL IOL ICC
All characteristics are measured with zero common-mode input voltage, unless otherwise specified. Full range (MIN to MAX) for LM139 and LM139A is -55C to 125C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
switching characteristics, VCC = 5 V, TA = 25C
PARAMETER TEST CONDITIONS MIN Response time RL connected to 5 V through 5.1 k, CL = 15 pF, See Note 8 100-mV input step with 5-mV overdrive TTL-level input step LM139 LM139A TYP 1.3 0.3 MAX s UNIT
CL includes probe and jig capacitance. NOTE 8: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
5
SLCS006L - OCTOBER 1979 - REVISED JUNE 2004
LM139, LM139A, LM239, LM239A, LM339, LM339A, LM2901, LM2901V QUAD DIFFERENTIAL COMPARATORS
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER TEST CONDITIONS VCC = 5 V to 30 V, VIC = VICR(min), VO = 1.4 V VO = 1.4 V VO = 1.4 V TA MIN 25C Full range 25C IIO IIB Input offset current Input bias current Full range 25C Full range 25C Full range VCC = 15 V, VO = 1.4 V to 11.4 V, RL 15 k to VCC VOH = 5 V VID = 1 V VOH = 30 V VID = -1 V, VID = -1 V, VO = 2.5 V, IOL = 4 mA VOL = 1.5 V No load 0 to VCC-1.5 0 to VCC-2 50 200 0.1 150 50 1 400 700 6 16 0.8 2 6 16 0.8 2 150 -25 5 VIO Input offset voltage LM239 LM339 TYP 2 MAX 5 9 50 150 -250 -400 0 to VCC-1.5 0 to VCC-2 50 200 0.1 50 1 400 700 mV mA mA -25 5 MIN LM239A LM339A TYP 1 MAX 3 mV 4 50 150 -250 -400 nA nA UNIT
VICR
Common-mode input-voltage range Large-signal differential-voltage amplification High-level output current Low-level output voltage Low-level output current Supply current (four comparators)
V
AVD
25C 25C Full range 25C Full range 25C 25C
V/mV nA A
IOH VOL IOL ICC
All characteristics are measured with zero common-mode input voltage, unless otherwise specified. Full range (MIN to MAX) for LM239 and LM239A is -25C to 85C, for LM339 and LM339A is 0C to 70C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
switching characteristics, VCC = 5 V, TA = 25C
PARAMETER TEST CONDITIONS RL connected to 5 V through 5.1 k, CL = 15 pF, See Note 8 100-mV input step with 5-mV overdrive TTL-level input step LM239, LM239A, LM339, LM339A MIN Response time TYP 1.3 0.3 MAX s UNIT
CL includes probe and jig capacitance. NOTE 8: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
6
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
LM139, LM139A, LM239, LM239A, LM339, LM339A, LM2901, LM2901V QUAD DIFFERENTIAL COMPARATORS
SLCS006L - OCTOBER 1979 - REVISED JUNE 2004
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER TEST CONDITIONS Non-A devices A-suffix devices TA 25C VIO Input offset voltage VIC = VICR(min), VO = 1.4 V, VCC = 5 V to MAX Full range 25C Full range 25C IIO IIB Input offset current Input bias current VO = 1.4 V VO = 1.4 V Full range 25C Full range 25C Full range VCC = 15 V, VO = 1.4 V to 11.4 V, RL 15 k to VCC VID = 1 V VID = -1 V, IOL = 4 mA VID = -1 V, VO = 2.5 V, No load VOH = 5 V VOH = VCC MAX Non-V devices VOL IOL ICC Low-level output voltage Low-level output current Supply current (four comparators) V-suffix devices All devices VOL = 1.5 V VCC = 5 V VCC = MAX 25C Full range 25C 25C 6 16 0.8 1 2 2.5 0 to VCC-1.5 0 to VCC-2 25 100 0.1 150 150 50 1 500 400 700 mA mA mV -25 5 1 LM2901 MIN TYP 2 MAX 7 15 2 4 50 200 -250 -500 nA nA mV UNIT
VICR
Common-mode input-voltage range
V
AVD
Large-signal differential-voltage amplification High-level output current
25C 25C Full range
V/mV nA A
IOH
All characteristics are measured with zero common-mode input voltage, unless otherwise specified. Full range (MIN to MAX) for LM2901 is -40C to 125C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified. VCC MAX = 30 V for non-V devices, and 32 V for V-suffix devices.
switching characteristics, VCC = 5 V, TA = 25C
LM2901 PARAMETER Response time TEST CONDITIONS RL connected to 5 V through 5.1 k, CL = 15 pF, See Note 8 100-mV input step with 5-mV overdrive TTL-level input step MIN TYP 1.3 0.3 MAX UNIT s
CL includes probe and jig capacitance. NOTE 8: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
7
MECHANICAL DATA
MCFP002A - JANUARY 1995 - REVISED FEBRUARY 2002
W (R-GDFP-F14)
CERAMIC DUAL FLATPACK
Base and Seating Plane
0.045 (1,14) 0.026 (0,66)
0.260 (6,60) 0.235 (5,97)
0.080 (2,03) 0.045 (1,14)
0.008 (0,20) 0.004 (0,10)
0.280 (7,11) MAX 1 14 0.019 (0,48) 0.015 (0,38)
0.050 (1,27)
0.390 (9,91) 0.335 (8,51) 0.005 (0,13) MIN 4 Places
7 0.360 (9,14) 0.250 (6,35)
8 0.360 (9,14) 0.250 (6,35)
4040180-2 / C 02/02 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification only. Falls within MIL STD 1835 GDFP1-F14 and JEDEC MO-092AB
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
MECHANICAL DATA
MLCC006B - OCTOBER 1996
FK (S-CQCC-N**)
28 TERMINAL SHOWN
LEADLESS CERAMIC CHIP CARRIER
18
17
16
15
14
13
12
NO. OF TERMINALS ** 11 10 28 9 8 7 6 68 5 84 44 52 20
A MIN 0.342 (8,69) 0.442 (11,23) 0.640 (16,26) 0.739 (18,78) 0.938 (23,83) 1.141 (28,99) MAX 0.358 (9,09) 0.458 (11,63) 0.660 (16,76) 0.761 (19,32) 0.962 (24,43) 1.165 (29,59) MIN 0.307 (7,80) 0.406 (10,31) 0.495 (12,58) 0.495 (12,58) 0.850 (21,6) 1.047 (26,6)
B MAX 0.358 (9,09) 0.458 (11,63) 0.560 (14,22) 0.560 (14,22) 0.858 (21,8) 1.063 (27,0)
19 20 21 B SQ 22 A SQ 23 24 25
26
27
28
1
2
3
4 0.080 (2,03) 0.064 (1,63) 0.020 (0,51) 0.010 (0,25)
0.020 (0,51) 0.010 (0,25)
0.055 (1,40) 0.045 (1,14)
0.045 (1,14) 0.035 (0,89)
0.028 (0,71) 0.022 (0,54) 0.050 (1,27)
0.045 (1,14) 0.035 (0,89)
4040140 / D 10/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a metal lid. The terminals are gold plated. Falls within JEDEC MS-004
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
MECHANICAL DATA
MSOI002B - JANUARY 1995 - REVISED SEPTEMBER 2001
D (R-PDSO-G**)
8 PINS SHOWN 0.050 (1,27) 8 5 0.020 (0,51) 0.014 (0,35) 0.010 (0,25)
PLASTIC SMALL-OUTLINE PACKAGE
0.244 (6,20) 0.228 (5,80) 0.157 (4,00) 0.150 (3,81)
0.008 (0,20) NOM
Gage Plane 1 A 4 0- 8 0.044 (1,12) 0.016 (0,40)
0.010 (0,25)
Seating Plane 0.069 (1,75) MAX 0.010 (0,25) 0.004 (0,10) 0.004 (0,10)
PINS ** DIM A MAX A MIN
8 0.197 (5,00) 0.189 (4,80)
14 0.344 (8,75) 0.337 (8,55)
16 0.394 (10,00) 0.386 (9,80)
4040047/E 09/01 NOTES: A. B. C. D. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15). Falls within JEDEC MS-012
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
MECHANICAL DATA
MSSO002E - JANUARY 1995 - REVISED DECEMBER 2001
DB (R-PDSO-G**)
28 PINS SHOWN 0,65 28 0,38 0,22 15 0,15 M
PLASTIC SMALL-OUTLINE
0,25 0,09 5,60 5,00 8,20 7,40
Gage Plane 1 A 14 0- 8 0,25 0,95 0,55
Seating Plane 2,00 MAX 0,05 MIN 0,10
PINS ** DIM A MAX
14
16
20
24
28
30
38
6,50
6,50
7,50
8,50
10,50
10,50
12,90
A MIN
5,90
5,90
6,90
7,90
9,90
9,90
12,30 4040065 /E 12/01
NOTES: A. B. C. D.
All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-150
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
MECHANICAL DATA
MTSS001C - JANUARY 1995 - REVISED FEBRUARY 1999
PW (R-PDSO-G**)
14 PINS SHOWN
PLASTIC SMALL-OUTLINE PACKAGE
0,65 14 8
0,30 0,19
0,10 M
0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 A 7 0- 8 0,75 0,50
Seating Plane 1,20 MAX 0,15 0,05 0,10
PINS ** DIM A MAX
8
14
16
20
24
28
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
4040064/F 01/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Interface Logic Power Mgmt Microcontrollers amplifier.ti.com dataconverter.ti.com dsp.ti.com interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com Applications Audio Automotive Broadband Digital Control Military Optical Networking Security Telephony Video & Imaging Wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2004, Texas Instruments Incorporated www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless

▲Up To Search▲

Price & Availability of LM139

	To Download LM139 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .