 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HMC588LC4B v00.1105 WIDEBAND MMIC VCO w/ BUFFER AMPLIFIER, 8.0 - 12.5 GHz Typical Applications This wideband MMIC VCO is ideal for: * Industrial/Medical Equipment * Test & Measurement Equipment * Military Radar, EW & ECM Features Pout: +5 dBm Low SSB Phase Noise: -93 dBc/Hz @100 kHz No External Resonator Needed Single Positive Supply: +5V @ 55 mA Fast Modulation Bandwidth: 65 MHz RoHS Compliant 4 x 4 mm SMT Package Functional Diagram General Description The HMC588LC4B is a wideband GaAs InGaP HBT MMIC Voltage Controlled Oscillator which incorporates the resonator, negative resistance device, and varactor diode. Output power and phase noise performance are excellent over temperature due to the oscillator's monolithic construction. The Vtune port accepts an analog tuning voltage from 0 to +13V, and accommodates a very fast 65 MHz tuning bandwidth. The HMC588LC4B VCO operates from a single +5V supply, consumes only 55 mA of current, and is housed in a RoHS compliant SMT package. This wideband VCO uniquely combines the attributes of ultra small size, low phase noise, low power consumption, and wide tuning range. 15 VCOs - SMT Electrical Specifications, TA = +25 C, Vcc = +5V Parameter Frequency Range Power Output SSB Phase Noise @ 100 kHz Offset SSB Phase Noise @ 10 kHz Offset Tune Voltage (Vtune) Supply Current (Icc) (Vcc = +5.0V) Tune Port Leakage Current @ +13V Output Return Loss 2nd Harmonic Mod Port Bandwidth (Vtune) Pulling (into a 2.0:1 VSWR) Pushing @ Vtune= +5V Frequency Drift Rate 7 -18 65 4 100 0.3 0 40 2 Min. Typ. 8.0 - 12.5 5 -93 -65 13 75 10 Max. Units GHz dBm dBc/Hz dBc/Hz V mA A dB dBc MHz MHz pp MHz/V MHz/C 15 - 172 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC588LC4B v00.1105 WIDEBAND MMIC VCO w/ BUFFER AMPLIFIER, 8.0 - 12.5 GHz Frequency vs. Tuning Voltage, Vcc = +5V 14 OUTPUT FREQUENCY (GHz) 13 12 11 10 9 8 7 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 TUNING VOLTAGE (VOLTS) Frequency vs. Tuning Voltage, T = +25 C 14 OUTPUT FREQUENCY (GHz) 13 12 11 10 9 8 7 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 TUNING VOLTAGE (VOLTS) +25 C +85 C -40 C 4.75 V 5.00 V 5.25 V Sensitivity vs. Tuning Voltage, Vcc= +5V 1000 900 SENSITIVITY (MHz/VOLT) Output Power vs. Tuning Voltage, Vcc= +5V 10 9 OUTPUT POWER (dBm) 8 7 6 800 700 600 500 400 300 200 100 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 TUNING VOLTAGE (VOLTS) +25 C +85 C -40 C 15 +25 C +85 C -40 C 4 3 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 TUNING VOLTAGE (VOLTS) SSB Phase Noise vs. Tuning Voltage 0 -10 SSB PHASE NOISE (dBc/Hz) -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 TUNING VOLTAGE (VOLTS) 10 kHz 100 kHz Typical SSB Phase Noise @ Vtune= +5V 0 -10 SSB PHASE NOISE (dBc/Hz) -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 -120 2 10 10 3 10 4 10 5 10 6 OFFSET FREQUENCY (Hz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 15 - 173 VCOs - SMT 5 HMC588LC4B v00.1105 WIDEBAND MMIC VCO w/ BUFFER AMPLIFIER, 8.0 - 12.5 GHz Absolute Maximum Ratings Vcc Vtune Junction Temperature Continuous Pdiss (T = 85C) (derate 10.5 mW/C above 85C) Thermal Resistance (junction to ground paddle) Storage Temperature Operating Temperature ESD Sensitivity (HBM) +5.5 Vdc 0 to +15V 135 C 526 mW 95 C/W -65 to +150 C -40 to +85 C Class 1A Outline Drawing 15 VCOs - SMT NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER Ni. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 15 - 174 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC588LC4B v00.1105 WIDEBAND MMIC VCO w/ BUFFER AMPLIFIER, 8.0 - 12.5 GHz Pin Descriptions Pin Number 1 - 3, 5 - 11, 13, 17 - 24 Function Description No Connection. These pins may be connected to RF/DC ground. Performance will not be affected. Interface Schematic N/C 4 Vtune Control Voltage and Modulation Input. Modulation bandwidth dependent on drive source impedance. 12 Vcc Supply Voltage Vcc= +5V 14, 16 GND Package bottom has an exposed metal paddle that must also be RF & DC grounded. 15 VCOs - SMT 15 - 175 15 RFOUT RF output (AC coupled) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC588LC4B v00.1105 WIDEBAND MMIC VCO w/ BUFFER AMPLIFIER, 8.0 - 12.5 GHz Evaluation PCB 15 VCOs - SMT List of Materials for Evaluation PCB 108648 [1] Item J1 J2 J3 C1 C2 U1 PCB [2] Description PCB Mount SMA RF Connector, Johnson PCB Mount SMA Connector, SRI DC Header 1000 pF Capacitor, 0402 Pkg. 4.7 F Capacitor, Tantalum HMC588LC4B VCO 108646 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. 15 - 176 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC588LC4B v00.1105 WIDEBAND MMIC VCO w/ BUFFER AMPLIFIER, 8.0 - 12.5 GHz Notes: 15 VCOs - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 15 - 177 |
Price & Availability of HMC588LC4B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |