|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
www.fairchildsemi.com FAN4040 Precision Micropower Shunt Voltage Reference Features * * * * * * Fixed 2.500V and 3.300V Tolerances to 0.1% (25C) Low output noise Low temperature coefficient to 100ppm/C Small package Extended operating current range Description The FAN4040 series of precision shunt references are ideal for space- and cost-sensitive applications. They are available in two output voltages (2.500V and 3.300V) and with four output voltage tolerances (0.1%, 0.2%, 0.5% and 1%). They also have excellent temperature coefficients, to 100ppm/C for the tighter tolerance grades. The FAN4040 series has an extended operating current range, sinking as much as 25mA. The FAN4040 series is available in SOT-23 package. Applications * * * * * Portable equipment Disk drives Instrumentation Audio equipment Data acquisition systems Connection Diagrams SOT-23 + 1 3* - 2 *This pin must be left floating or connected to pin 2. Top View REV. 1.0.1 9/29/00 FAN4040 PRODUCT SPECIFICATION Absolute Maximum Ratings1 Ratings are over full operating free-air temperature range unless otherwise noted. Parameter Continuous cathode current, IK Power dissipation Storage Temperature Range Lead Temperature (Soldering, 10 sec.) Min. -30 -65 Max. 30 150 300 Unit mA See Dissipation Rating Table C C Notes: 1. Functional operation under these conditions is not implied. Permanent damage may occur if the device is subjected to conditions outside these ratings. Recommended Operating Conditions Parameter Continuous cathode current, IK Operating temperature range in free air, TA Min. 0.025 -40 Max. 25 85 Unit mA C Dissipation Rating Table Package SOT231 Power Rating TA 25C 306mW Derating Factor TA 25C 3.0mW/C Power Rating TA = 70C 168mW Note: 1. It is recommended to connect pin 3 to pin 2 to ensure optimal thermal performance. Equivalent Schematic + + _ _ 2 REV. 1.0.1 9/29/00 PRODUCT SPECIFICATION FAN4040 Guaranteed Electrical Characteristics, FAN4040-2.5 (TA = 25C unless otherwise specified, in free air) The * denotes specifications which apply over the full operating temperature range. Symbol VR TCVR Parameter Reverse Breakdown Voltage Reverse Breakdown Voltage Tolerance IRMIN Minimum Operating Current VR/T Reverse Breakdown Voltage Temperature Coefficient VR (IK) Reverse Breakdown Voltage Change with Operating Current ZKA eN VR *Typical. Conditions IK = 100A IK = 100A IK = 1mA IRMIN IK 1mA 1mA IK 15mA 1mA IK 25mA IK=1mA, f=120Hz, IAC=0.1IK IK=100A, 10Hz f 10kHz t=1000hrs, T=25C, IK=100A Limits A B C D 2.500 2.500 2.500 2.500 2.5 5.0 12 25 * 19 21 29 49 * 65 65 65 70 * 100 100 100 150 * * 1.2 8.0 10 0.8 35 120 1.2 8.0 10 0.8 35 120 1.2 8.0 10 0.9 35 120 1.5 10.0 12 1.1 35 120 Units V* mV mV A ppm/C mV mV mV* * VRMS* ppm* Reverse Dynamic Impedance Wideband Noise Reverse Breakdown Voltage Long-term Stability Guaranteed Electrical Characteristics, FAN4040-3.3 (TA = 25C unless otherwise specified, in free air) The * denotes specifications which apply over the full operating temperature range. Parameter Reverse Breakdown Voltage Reverse Breakdown Voltage Tolerance IRMIN Minimum Operating Current VR/T Reverse Breakdown Voltage Temperature Coefficient VR (IK) Reverse Breakdown Voltage Change with Operating Current ZKA eN VR *Typical. Symbol VR TCVR Conditions IK = 100A IK = 100A IK = 1mA IRMIN IK 1mA 1mA IK 15mA 1mA IK 25mA IK=1mA, f=120Hz, IAC=0.1IK IK=100A, 10Hz f 10kHz t=1000hrs, T=25C, IK=100A Limits A B C D 3.300 3.300 3.300 3.300 3.3 6.6 17 33 * 25 28 38 65 * 70 70 70 75 * 100 100 100 150 * * 1.2 10 12 1.0 70 120 1.2 10 12 1.0 70 120 1.2 10 12 1.0 70 120 1.5 13 15 1.3 70 120 Units V* mV mV A ppm/C mV mV mV* * VRMS* ppm* Reverse Dynamic Impedance Wideband Noise Reverse Breakdown Voltage Long-term Stability REV. 1.0.1 9/29/00 3 FAN4040 PRODUCT SPECIFICATION Mechanical Dimensions SOT-23 Package Notes: Notes 1. Dimensions are inclusive of plating. 2. Dimensions are exclusive of mold flash & metal burr. 3. Comply to JEDEC TO-236. 4. This drawing is for matrix leadframe only. Symbol A A1 B c D E e e1 H L S Inches Min. Max. Millimeters Min. Max. .035 .044 .0004 .004 .012 .020 .003 .008 .110 .120 .047 .055 .037 BSC .075 BSC .083 .104 .021 REF .016 Nom .89 1.12 .01 .10 .30 .50 .08 .20 2.80 3.04 1.20 1.40 .95 BSC 1.90 BSC 2.10 2.64 .54 REF .395 Nom D e1 e S c L E H B A1 A 4 REV. 1.0.1 9/29/00 FAN4040 PRODUCT SPECIFICATION Ordering Information Example: FAN4040AIS3-2.5 FAN4040 A I S3 - 2.5 Grade 0.1% = A 0.2% = B 0.5% = C 1.0% = D Package SOT23 = S3 Voltage 2.5V = 2.5 3.3V = 3.3 SOT-23 Package Marking Information Only 3 fields of marking are possible on an SOT-23. This table gives the meaning of these fields. Example: F2A F 2 A Voltage 2.5V = 2 3.3V = 3 Grade 0.1% = A 0.2% = B 0.5% = C 1.0% = D DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com 9/29/00 0.0m 005 Stock#DS30004040 2000 Fairchild Semiconductor Corporation |
Price & Availability of FAN4040 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |