View 6601_969718.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(R)
74LVX573
LOW VOLTAGE OCTAL D-TYPE LATCH (3-STATE NON INV.) WITH 5V TOLERANT INPUTS
s s s s
s
s
s
s
s
s
s
HIGH SPEED: tPD = 6.4 ns (TYP.) at VCC = 3.3V 5V TOLERANT INPUTS POWER-DOWN PROTECTION ON INPUTS INPUT VOLTAGE LEVEL: VIL = 0.8V, VIH = 2V at VCC = 3V LOW POWER DISSIPATION: ICC = 4 A (MAX.) at TA = 25 oC LOW NOISE: VOLP = 0.3 V (TYP.) at VCC = 3.3V SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 4 mA (MIN) BALANCED PROPAGATION DELAYS: tPLH tPHL OPERATING VOLTAGE RANGE: VCC (OPR) = 2V to 3.6V PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 573 IMPROVED LATCH-UP IMMUNITY
M (Micro Package)
T (TSSOP Package)
ORDER CODES : 74LVX573M 74LVX573T While the LE input is held at a high level, the Q outputs will follow the data input precisely. When the LE is taken low, the Q outputs will be latched precisely at the logic level of D input data. While the (OE) input is low, the 8 outputs will be in a normal logic state (high or low logic level) and while high level the outputs will be in a high impedance state. It has better speed performance at 3.3V than 5V LSTTL family combined with the true CMOS low power consumption. Power down protection is provided on all inputs and 0 to 7V can be accepted on inputs with no regard to the supply voltage. This device can be used to interface 5V to 3V. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage.
DESCRIPTION The LVX573 is a low voltage CMOS OCTAL D-TYPE LATCH with 3 STATE OUTPUT NON INVERTING fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for low power and low noise 3.3V applications. This 8 bit D-Type flip-flop is controlled by a latch enable input (LE) and an output enable input (OE). PIN CONNECTION AND IEC LOGIC SYMBOLS
April 1999
1/10
74LVX573
INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION
PIN No 1 2, 3, 4, 5, 6, 7, 8, 9 12, 13, 14, 15, 16, 17, 18, 19 11 10 20 SYMBOL OE D0 to D7 NAME AND FUNCT ION 3 State Output Enable Input (Active LOW) 3 State Latch Outputs
Q0 to Q7
Data Inputs
LE GND VCC
Latch Enable Input Ground (0V) Positive Supply Voltage
TRUTH TABLE
INPUTS OE H L L L LE X L H H D X X L H OUT PUTS Q Z NO CHANGE * L H
X:Don't care Z: High impedance * Q outputs are latched atthe time when the LEinput is taken low
LOGIC DIAGRAMS
2/10
74LVX573
ABSOLUTE MAXIMUM RATINGS
Symbol VCC VI VO IIK IOK IO Tstg TL Supply Voltage DC Input Voltage DC Output Voltage DC Input Diode Current DC Output Diode Current DC Output Current Storage Temperature Lead Temperature (10 sec) Parameter Value -0.5 to +7.0 -0.5 to 7.0 -0.5 to VCC + 0.5 - 20 20 25 50 -65 to +150 300 Unit V V V mA mA mA mA
o o
ICC or IGND DC VCC or Ground Current
C C
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied.
RECOMMENDED OPERATING CONDITIONS
Symbol VCC VI VO Top dt/dv Input Voltage Output Voltage Operating Temperature: Input Rise and Fall Time (VCC = 3V) (note 2) Parameter Supply Voltage (note 1) Valu e 2 to 3.6 0 to 5.5 0 to VCC -40 to +85 0 to 100 Unit V V V
o
C
ns/V
1) Truth Table guaranteed: 1.2V to 3.6V 2) VIN from 0.8V to 2V
3/10
74LVX573
DC SPECIFICATIONS
Symb ol Parameter V CC (V) VIH High Level Input Voltage 2.0 3.0 3.6 VIL Low Level Input Voltage 2.0 3.0 3.6 VOH High Level Output Voltage Low Level Output Voltage Input Leakage Current 3 State Output Leakage Current Quiescent Supply Current 2.0 3.0 3.0 VOL 2.0 3.0 3.0 II IOZ ICC 3.6 3.6 3.6 VI = V IH or V IL VI(*) = VIH or VIL
(* )
Test Co nditions Min. 1.5 2.0 2.4 T yp.
Valu e T A = 25 oC Max. -40 to 85 o C Min. 1.5 2.0 2.4 0.5 0.8 0.8 0.5 0.8 0.8 1.9 2.9 2.48 0.0 0.0 0.1 0.1 0.36 0.1 0.25 4 0.1 0.1 0.44 1 2.5 40 Max.
Un it
V
V
I O =-50 A IO=-50 A IO=-4 mA IO=50 A IO=50 A IO=4 mA
1.9 2.9 2.58
2.0 3.0
V
V A A A
VI = 5V or GND VI = VIH or VIL VO = VCC or GND VI = VCC or GND
(*) All outputs loaded.
DYNAMIC SWITCHING CHARACTERISTICS
Symb ol Parameter V CC (V) VOLP VOLV VIHD VILD Dynamic Low Voltage Quiet Output (note 1, 2) Dynamic High Voltage Input (note 1, 3) Dynamic Low Voltage Input (note 1, 3) 3.3 -0.8 3.3 3.3 C L = 50 pF 0.8 Test Co nditions Min. T yp. 0.3 -0.3 2 V Valu e T A = 25 oC Max. 0.8 -40 to 85 o C Min. Max. Un it
1) Worst case package 2) Max number of outputs defined as (n). Data inputs are driven 0V to 3.3V, (n -1) outputs switching and one output at GND 3) max number of data inputs (n) switching. (n-1) switching 0V to3.3V. Inputs under test switching: 3.3V to threshold (VILD), 0V to threshold (VIHD). f=1MHz
4/10
74LVX573
AC ELECTRICAL CHARACTERISTICS (CL = 50 pF, RL = 500 , Input tr = tf =3 ns)
Symb ol Parameter V CC (V) tPLH tPHL Propagation Delay Time LE to Q 2.7 2.7 3.3(*) 3.3(*) 2.7 2.7 3.3(*) 3.3(*) 2.7 2.7 3.3(*) Output Disable Time LE pulse Width, HIGH Setup Time D to LE HIGH or LOW Hold Time D to LE HIGH or LOW Output to Output Skew Time (note 1, 2) 3.3(*) 2.7 3.3(*) 2.7 3.3(*) 2.7 3.3(*) 2.7 3.3(*) 2.7 3.3
(*)
T est Con ditio n CL (p F) 15 50 15 50 15 50 15 50 15 50 15 50 15 50 15 50 15 50 15 50 50 50 R L = 1 k
Valu e T A = 25 oC -40 to Min. T yp. Max. Min. 8.2 15.6 1.0 10.7 19.1 1.0 6.4 8.9 7.6 10.1 5.9 8.4 7.8 10.3 6.1 8.6 12.1 10.1 10.1 13.6 14.5 18.0 9.3 12.8 15.0 18.5 9.7 13.2 19.1 13.6 6.5 5.0 5.0 3.5 1.5 1.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
Un it 85 o C Max. 18.5 22.0 12.0 15.5 17.5 21.0 11.0 14.5 18.5 22.0 12.0 15.5 22.0 15.5 7.5 5.0 5.0 3.5 1.5 1.5 1.5 1.5
ns
tPLH tPHL
Propagation Delay Time D to Q
ns
tPZL tPZH
Output Enable Time
ns
tPLZ tPHZ tw ts th tOSLH tOSHL
R L = 1 k
ns ns ns ns ns
1) Skew is defined as the absolute value of the difference between the actual propagation delay for any twooutputs of the same device switching in the same direction, either HIGH or LOW 2) Parameter guaranteed by design (*) Voltage range is 3.3V 0.3V
CAPACITIVE CHARACTERISTICS
Symb ol Parameter V CC (V) C IN COUT CPD Input Capacitance Output Capacitance Power Dissipation Capacitance (note 1) 3.3 3.3 3.3 fIN = 10 MHz Test Co nditions Min. T yp. 4 6 29 Valu e T A = 25 oC Max. -40 to 85 o C Min. Max. pF pF pF Un it
1) CPD isdefined as the value of the IC'sinternal equivalent capacitance which is calculated fromthe operating current consumption without load. (Referto Test Circuit).Average operting current can be obtained by the following equation. ICC(opr) = CPD * VCC * fIN + ICC/n(per circuit)
5/10
74LVX573
TEST CIRCUIT
T EST tPLH , tPHL tPZL , tPLZ tPZH , tPHZ
CL = 15/50 pF or equivalent (includes jig and probe capacitance) RL = R1 = 1K orequivalent RT = ZOUT of pulse generator (typically 50)
SW IT CH Open VCC GND
WAVEFORM 1: LE TO Qn PROPAGATION DELAYS, LE MINIMUM PULSE WIDTH, Dn TO LE SETUP AND HOLD TIMES (f=1MHz; 50% duty cycle)
6/10
74LVX573
WAVEFORM 2: OUTPUT ENABLE AND DISABLE TIMES (f=1MHz; 50% duty cycle)
WAVEFORM 3: PROPAGATION DELAY TIME (f=1MHz; 50% duty cycle)
7/10
74LVX573
SO-20 MECHANICAL DATA
DIM. MIN. A a1 a2 b b1 C c1 D E e e3 F L M S 7.40 0.50 12.60 10.00 1.27 11.43 7.60 1.27 0.75 8 (max.) 0.291 0.19 13.00 10.65 0.35 0.23 0.50 45 (typ.) 0.496 0.393 0.050 0.450 0.299 0.050 0.029 0.512 0.419 0.10 mm TYP. MAX. 2.65 0.20 2.45 0.49 0.32 0.013 0.009 0.020 0.004 MIN. inch TYP. MAX. 0.104 0.007 0.096 0.019 0.012
P013L
8/10
74LVX573
TSSOP20 MECHANICAL DATA
mm MIN. A A1 A2 b c D E E1 e K L 0o 0.50 0.05 0.85 0.19 0.09 6.4 6.25 4.3 6.5 6.4 4.4 0.65 BSC 4o 0.60 8o 0.70 0o 0.020 0.10 0.9 TYP. MAX. 1.1 0.15 0.95 0.30 0.2 6.6 6.5 4.48 0.002 0.335 0.0075 0.0035 0.252 0.246 0.169 0.256 0.252 0.173 0.0256 BSC 4o 0.024 8o 0.028 0.004 0.354 MIN. inch TYP. MAX. 0.433 0.006 0.374 0.0118 0.0079 0.260 0.256 0.176
DIM.
A
A2 A1 b e K c L E
D
E1
PIN 1 IDENTIFICATION
1
9/10
74LVX573
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a trademark of STMicroelectronics (c) 1999 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. http://www.st.com .
10/10

▲Up To Search▲

Price & Availability of 6601

	To Download 6601 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .