View 2526_965071.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Bulletin PD-20592 04/01
MBRS190TR MBRS1100TR
SCHOTTKY RECTIFIER 1 Amp
SMB
Major Ratings and Characteristics Characteristics
IF(AV) Rectangular waveform VRRM IFSM VF TJ @ tp = 5 s sine @ 1.0 Apk, TJ=125C range
Description/Features
The MBRS190TR, MBRS1100TR surface-mount Schottky rectifier has been designed for applications requiring low forward drop and very small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Small foot print, surface mountable Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability
MBR190TR MBR1100TR Units
1.0 100 870 0.62 - 55 to 175 A V A V C
Device Marking: IR19/ IR1C
CATHODE
ANODE
2.15 (.085) 1.80 (.071)
3.80 (.150) 3.30 (.130)
1
2
4.70 (.185) 4.10 (.161)
1 POLARITY
2 PART NUMBER
2.40 (.094) 1.90 (.075) 1.30 (.051) 0.76 (.030) 0.30 (.012) 0.15 (.006) 5.60 (.220) 5.00 (.197)
2.5 TYP. (.098 TYP.)
SOLDERING PAD
2.0 TYP. (.079 TYP.)
4.2 (.165) 4.0 (.157)
Outline SMB Dimensions in millimeters and (inches) For recommended footprint and soldering techniques refer to application note #AN-994
www.irf.com
1
MBRS190TR, MBRS1100TR
Bulletin PD-20592 04/01
Voltage Ratings
Part number
VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V)
MBRS190TR
90
MBRS1100TR
100
Absolute Maximum Ratings
Parameters
IF(AV) Max. Average Forward Current IFSM EAS IAR Max. Peak One Cycle Non-Repetitive Surge Current Non- Repetitive Avalanche Energy Repetitive Avalanche Current
Value
1.0 870 50 6.0 0.5
Units Conditions
A A 50% duty cycle @ TL = 147 C, rectangular wave form 5s Sine or 3s Rect. pulse 10ms Sine or 6ms Rect. pulse mJ A TJ = 25 C, IAS = 0.5A, L = 11mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. Va = 1.5 x Vr typical Following any rated load condition and with rated VRRM applied
Electrical Specifications
Parameters
VFM Max. Forward Voltage Drop * See Fig. 1 (1)
Value
0.78 0.87 0.62 0.70
Units
V V V V mA mA pF nH V/ s @ 1A @ 2A @ 1A @ 2A TJ = 25 C TJ = 125 C
Conditions
TJ = 25 C TJ = 125 C VR = rated VR
IRM CT LS
Max. Reverse Leakage Current (1) * See Fig. 2 Typical Junction Capacitance Typical Series Inductance (Rated VR)
0.5 1 42 2.0 10000
VR = 5VDC, (test signal range 100kHz to 1MHz) 25C Measured lead to lead 5mm from package body
dv/dt Max. Volatge Rate of Charge
(1) Pulse Width < 300s, Duty Cycle < 2%
Thermal-Mechanical Specifications
Parameters
TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range
Value
-55to175 -55to175 36 0.10 SMB
Units
C C C/W DC operation g (oz.)
Conditions
RthJL Max. Thermal Resistance, Junction to Lead (2) wt Approximate Weight Case Style
Similar DO-214AA
(2) Mounted 1 inch square PCB, thermal probe connected to lead 2mm from package
2
www.irf.com
MBRS190TR, MBRS1100TR
Bulletin PD-20592 04/01
10
10
Tj = 175C
Reverse Current - I R (m A)
1 0.1 0.01 0.001 0.0001 .00001 0
150C
125C 100C
Tj = 175C Tj = 125C
Instantaneous Forward Current - I F (A)
75C
50C
Tj = 25C
25C
20
40
60
80
100
1
Reverse Voltage - VR (V) Fig. 2 - Typical Peak Reverse Current Vs. Reverse Voltage
100
Junction Capacitance - C T (p F)
T = 25C
J
0.1 0.2
10
0.4
0.6
0.8
1
0
20
40
60
80
100
Forward Voltage Drop - VFM (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics
Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage
100
(C/W)
10
Thermal Impedance Z
D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20
thJC
PDM
t1
1
Single Pulse (Thermal Resistance) Notes: 1. Duty factor D = t1/ t2
t2
. .
2. Peak Tj = Pdm x ZthJC + Tc
0.1 0.00001
0.0001
0.001
0.01
0.1
1
10
100
t1 , Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics (Per Leg)
www.irf.com
3
MBRS190TR, MBRS1100TR
Bulletin PD-20592 04/01
180
Allowable Lead Temperature (C) Average Power Loss (Watts)
1
DC
D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75
170 160 150 140
0.8 0.6 0.4 0.2 0
D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75
RMS Limit
DC
130 Square wave (D = 0.50) Rated Vr applied 120 110 0 0.4 0.8 1.2 1.6
Average Forward Current - I F(AV) (A) Fig. 4 - Maximum Average Forward Current Vs. Allowable Lead Temperature
see note (2)
0
0.3
0.6
0.9
1.2
1.5
Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Average Forward Dissipation Vs. Average Forward Current
Non-Repetitive Surge Current - I FSM (A)
1000
100
At Any Rated Load Condition And With rated Vrrm Applied Following Surge
10 10
100
1000
10000
Square Wave Pulse Duration - Tp (Microsec) Fig. 6 - Maximum Peak Surge Forward Current Vs. Pulse Duration
(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR
4
www.irf.com
MBRS190TR, MBRS1100TR
Bulletin PD-20592 04/01
Tape & Reel Information
Dimensions in millimeters and (inches)
Marking & Identification
Each device has marking and identification on two rows. - The first row designates the device as manufactured by International Rectifier as indicated by the letters "IR", then Current and Voltage. - The second row shows the data code: Year and Week. See below marking diagram.
Ordering Information
MBRS1100TR - TAPE AND REEL WHEN ORDERING, INDICATE THE PART NUMBER AND THE QUANTITY ( IN MULTIPLES OF 3000 PIECES). EXAMPLE: MBRS1100TR - 6000 PIECES
FIRST ROW IR B 1 C SECOND ROW Date Code YY WW
www.irf.com
5
MBRS190TR, MBRS1100TR
Bulletin PD-20592 04/01
Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 04/01
6
www.irf.com

▲Up To Search▲

Price & Availability of 2526

	To Download 2526 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .