 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Transistor 2SB0792, 2SB0792A (2SB792, 2SB792A) Silicon PNP epitaxial planer type For high breakdown voltage low-noise amplification Complementary to 2SD0814 (2SD814) Unit: mm I Features G G G 2.8 -0.3 0.650.15 +0.2 +0.25 1.5 -0.05 0.650.15 +0.2 1.1 -0.1 Collector to base voltage Collector to 2SB0792 2SB0792A 2SB0792 -185 -150 -185 -5 -100 -50 200 150 -55 ~ +150 emitter voltage 2SB0792A Emitter to base voltage Peak collector current Collector current Collector power dissipation Junction temperature Storage temperature VCEO VEBO ICP IC PC Tj Tstg V V mA mA mW C C 1:Base 2:Emitter 3:Collector JEDEC:TO-236 EIAJ:SC-59 Mini Type Package Marking symbol : I(2SB0792) 2F(2SB0792A) I Electrical Characteristics Parameter Collector cutoff current Collector to emitter voltage 2SB0792 2SB0792A (Ta=25C) Symbol ICBO VCEO VEBO hFE* VCE(sat) fT Cob NV Conditions VCB = -100V, IE = 0 IC = -100A, IB = 0 IE = -10A, IC = 0 VCE = -5V, IC = -10mA IC = -30A, IB = -3mA VCB = -10V, IE = 10mA, f = 200MHz VCB = -10V, IE = 0, f = 1MHz VCE = -10V, IC = -1mA, GV = 80dB, Rg = 100k, Function = FLAT 200 4 150 -150 -185 -5 130 130 450 330 -1 V MHz pF mV min typ max -1 Unit A V V Emitter to base voltage Forward current transfer ratio 2SB0792 2SB0792A Collector to emitter saturation voltage Transition frequency Collector output capacitance Noise voltage *h FE Rank classification Rank hFE R 130 ~ 220 2SB0792 2SB0792A IR 2FR S 185 ~ 330 IS 2FS T 260 ~ 450 IT -- Note.) The Part numbers in the Parenthesis show conventional part number. Marking Symbol 0 to 0.1 VCBO -150 V 0.1 to 0.3 0.40.2 0.8 Parameter Symbol Ratings Unit 0.16 -0.06 +0.1 I Absolute Maximum Ratings 2 (Ta=25C) 0.4 -0.05 High collector to emitter voltage VCEO. Low noise voltage NV. Mini type package, allowing downsizing of the equipment and automatic insertion through the tape packing and the magazine packing. 0.95 2.9 -0.05 1 1.90.2 +0.2 0.95 3 +0.1 1.45 1 Transistor PC -- Ta 240 -100 Ta=25C -90 200 IB=-10mA -9mA -8mA -7mA -6mA -5mA -4mA -3mA 2SB0792, 2SB0792A IC -- VCE -120 VCE=-5V -100 25C Ta=75C -80 -25C IC -- VBE Collector power dissipation PC (mW) Collector current IC (mA) 160 -70 -60 -50 -40 -30 -20 -10 120 Collector current IC (mA) -12 -80 -60 80 -2mA -40 40 -1mA -20 0 0 20 40 60 80 100 120 140 160 0 0 -2 -4 -6 -8 -10 0 0 - 0.4 - 0.8 -1.2 -1.6 -2.0 Ambient temperature Ta (C) Collector to emitter voltage VCE (V) Base to emitter voltage VBE (V) VCE(sat) -- IC Collector to emitter saturation voltage VCE(sat) (V) -100 -30 -10 -3 -1 Ta=75C 25C -25C IC/IB=10 600 hFE -- IC 250 VCE=-5V 225 500 fT -- I E VCB=-10V Ta=25C Forward current transfer ratio hFE Transition frequency fT (MHz) -10 -30 -100 200 175 150 125 100 75 50 25 400 Ta=75C 300 25C -25C - 0.3 - 0.1 200 100 - 0.03 - 0.01 - 0.1 - 0.3 -1 -3 -10 -30 -100 0 -0.1 -0.3 -1 -3 0 0.1 0.3 1 3 10 30 100 Collector current IC (mA) Collector current IC (mA) Emitter current IE (mA) Cob -- VCB 10 Collector output capacitance Cob (pF) 9 8 7 6 5 4 3 2 1 0 -1 IE=0 f=1MHz Ta=25C -3 -10 -30 -100 Collector to base voltage VCB (V) 2 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR |
Price & Availability of 0600
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |