Part Number Hot Search : 
AD8324 MC100LV AM29F 7815AB 1N4732A 18VUV AF4000 314008
Product Description
Full Text Search
 

To Download CFY66 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 CFY66 HiRel K-Band GaAs Super Low Noise HEMT * *
HiRel Discrete and Microwave Semiconductor Conventional AlGaAs/GaAs HEMT (For new design we recommend to use our pseudo-morphic HEMT CFY67) For professional super low-noise amplifiers For frequencies from 500 MHz to > 20 GHz Hermetically sealed microwave package Super low noise figure, high associated gain Space Qualified ESA/SCC Detail Spec. No.: 5613/002, Type Variant No.s 01 to 04
4
3
* * * * *
1
2
ESD: Electrostatic discharge sensitive device, observe handling precautions!
Type
Marking
Ordering Code Pin Configuration 1 2 S 3 D 4 S
Package
CFY66-08 (ql) CFY66-08P (ql) CFY66-10 (ql) CFY66-10P (ql)
-
see below
G
Micro-X
CFY66-nnl: specifies gain and output power levels (see electrical characteristics)
(ql) Quality Level:
P: Professional Quality, H: High Rel Quality, S: Space Quality, ES: ESA Space Quality,
Ordering Code: Ordering Code: Ordering Code: Ordering Code:
on request on request on request on request
(see order instructions for ordering example)
Semiconductor Group
1 of 8
Draft D, September 99
CFY66
Maximum Ratings
Parameter Drain-source voltage Drain-gate voltage Gate-source voltage (reverse / forward) Drain current Gate forward current RF Input Power, C- and X-Band 1) Junction temperature Storage temperature range Total power dissipation
2)
Symbol VDS VDG VGS ID IG PRF,in TJ Tstg Ptot Tsol
Values 3.5 4.5 - 3... + 0.5 60 2 + 10 150 - 65... + 150 200 230
Unit V V V mA mA dBm C C mW C
Soldering temperature 3) Thermal Resistance Junction-soldering point Notes.:
Rth JS
515 (tbc.)
K/W
1) For VDS 2 V. For VDS > 2 V, derating is required. 2) At TS = + 47 C. For TS > + 47 C derating is required. 3) During 15 sec. maximum. The same terminal shall not be resoldered until 3 minutes have elapsed.
Semiconductor Group
2 of 8
Draft D, September 99
CFY66
Electrical Characteristics (at TA=25C; unless otherwise specified)
Parameter
Symbol min.
Values typ. max.
Unit
DC Characteristics Drain-source saturation current VDS = 2 V, VGS = 0 V Gate threshold voltage VDS = 2 V, ID = 1 mA Drain current at pinch-off VDS = 1.5 V, VGS = - 3 V Gate leakage current at pinch-off VDS = 1.5 V, VGS = - 3 V Transconductance VDS = 2 V, ID = 10 mA Gate leakage current at operation VDS = 2 V, ID = 10 mA Thermal resistance junction to soldering point IDss -VGth IDp 10 0.2 30 0.7 < 50 60 2.0 mA V A
-IGp
-
< 50
200
A
gm10
40
55
-
mS
-IG10
-
< 0.5
2
A
Rth JS
-
450
-
K/W
Semiconductor Group
3 of 8
Draft D, September 99
CFY66
Electrical Characteristics (continued)
Parameter
Symbol min.
Values typ. max.
Unit
AC Characteristics Noise figure 1) VDS = 2 V, ID = 10 mA, f = 12 GHz CFY66-08, -08P CFY66-10, 10P Associated gain. 1) VDS = 2 V, ID = 10 mA, f = 12 GHz CFY66-08, -08P CFY66-10, 10P Output power at 1 dB gain compression VDS = 2 V, ID = 20 mA, f = 12 GHz CFY66-06, -08, -10 CFY66-08P, -10P Notes.: 1) Noise figure / sssociated gain characteristics given for minimum noise figure matching conditions (fixed generic matching, no fine-tuning). 2) Output power characteristics given for optimum output power matching conditions (fixed generic matching, no fine-tuning).
2)
NF Ga 10.0 9.5 P1dB 10.0 11.0 11.0 11.0 10.5 0.7 0.9 0.8 1.0
dB
dB
dBm
Semiconductor Group
4 of 8
Draft D, September 99
CFY66
Typical Common Source S-Parameters
CFY66-08: V DS = 2 V, f |S11| I D = 10 mA, Z o = 50 Typical Common Source Noise-Parameters
V DS = 2 V, I D = 10 mA, Z o = 50 NF min Rn | opt | < opt [dB] [magn] [angle] [] 0,27 0,770 16 17,85 0,31 0,720 30 16,55 0,35 0,672 43 15,27 0,38 0,634 57 13,75 0,42 0,604 71 11,99 0,46 0,578 85 10,04 0,50 0,558 100 8,15 0,55 0,541 114 6,30 0,60 0,528 128 4,74 0,65 0,517 143 3,45 0,70 0,506 157 2,58 0,74 0,496 171 2,16 0,79 0,485 -175 2,27 0,85 0,472 -160 2,88 0,89 0,457 -146 3,99 0,95 0,437 -132 5,59 1,00 0,415 -118 7,63 1,06 0,389 -102 9,96
CFY66-08: f [GHz] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
Semiconductor Group
5 of 8
Draft D, September 99
CFY66
Order Instructions:
Full type variant including quality level must be specified by the orderer. For HiRel Discrete and Microwave Semiconductors the ordering code specifies device family and quality level only.
Ordering Form: Ordering Code: Q.......... CFY66 -(nnl) (ql) -(nnl) Noise Figure/Gain and/or Power Level (ql): Quality Level Ordering Example: Ordering Code: (on request) CFY66-08P ES For CFY66, Noise Figure/Gain/Power Level 08P: NF < 0.8 dB, Ga > 10.0 dB, P1dB > 10 dBm @ 12 GHz in ESA Space Quality Level
Further Informations:
See our WWW-Pages: - Discrete and RF-Semiconductors (Small Signal Semiconductors) www.infineon.com/products/discrete/hirel.htm
- HiRel Discrete and Microwave Semiconductors www.infineon.com/products/discrete/hirel.htm
Please contact also our marketing division : Tel.: Fax.: e-mail: Address: ++89 234 24480 ++89 234 28434 martin.wimmers@infineon.com Infineon Technologies Semiconductors, High Frequency Products Marketing, P.O.Box 801709, D-81617 Munich
Semiconductor Group
6 of 8
Draft D, September 99
CFY66
Micro-X Package
Published by Infineon Technologies Semiconductors, High Frequency Products Marketing, P.O.Box 801709, D-81617 Munich. Infineon Technologies AG 1998. All Rights Reserved. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. For questions on technology, delivery and prices please contact the Offices of Semiconductor Group in Germany or the Infineon Technologies Companies and Representatives woldwide (see address list). Due to technical requirements components may contain dangerous substances. For information on the type in question please contact your nearest Infineon Technologies Office, Semiconductor Group. Infineon Technologies Semiconductors is a certified CECC and QS9000 manufacturer (this includes ISO 9000).
Semiconductor Group
7 of 8
Draft D, September 99


▲Up To Search▲   

 
Price & Availability of CFY66

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X