View AAF5060PBESEEVG_897925.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

5.0mm x 6.0mm FULL COLOR LED LAMP
ATTENTION
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES
AAF5060PBESEEVG
BLUE HYPER ORANGE GREEN
Features
OUTSTANDING MATERIAL EFFICIENCY. RELIABLE AND RUGGED. WATER CLEAR LENS. LOW POWER CONSUMPTION. ONE BLUE, ONE ORANGE AND ONE GREEN CHIPS IN ONE PACKAGE. CAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM, INCLUDING WHITE LIGHT. RoHS COMPLIANT.
Description
The Blue source color devices are made with InGaN on SiC Light Emitting Diode. The Hyper Orange source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. The Green source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded.
Package Dimensions
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice.
Digitally signed by NINGTING cn=NINGTING, o=NINGTING, c=CN Date: 2005.03.14 16:38:48 +08'00' Reason:
www..com
SPEC NO: DSAB7357 APPROVED: J. Lu www..com
REV NO: V.6 CHECKED: Allen Liu
DATE:MAR/14/2005 DRAWN:B.H.LI
PAGE: 1 OF 5 ERP: 1201000914
www..com
Selection Guide
Part No. Dice Lens Type Iv (mcd) @ 30mA *50mA Min. BLUE (InGaN) AAF5060PBESEEVG HYPER ORANGE(InGaAIP) GREEN (InGaN)
Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. * Luminous intensity with asterisk is measured at 50mA.
Viewing Angle 21/2
Typ. 250 *1000 350
110 WATER CLEAR *650 180
100
Electrical / Optical Characteristics at TA=25C
Symbol peak Parameter Peak Wavelength Device Blue Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green All Typ. 465 630 520 470 621 525 25 20 38 110 25 45 3.7 2.0 3.5 4.3 2.5 4.5 10 Max. Units nm Test Conditions IF=20mA
D
Dominant Wavelength
nm
IF=20mA
1/2
Spectral Line Half-width
nm
IF=20mA
C
Capacitance
pF
VF=0V;f=1MHz
VF IR
Forward Voltage Reverse Current
V uA
IF=20mA VR = 5V
Absolute Maximum Ratings at TA=25C
Parameter Power dissipation [2] DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Lead Solder Temperature [3] Lead Solder Temperature [4]
Notes: 1. Within 350mW at all chips are lightened. 2. 1/10 Duty Cycle, 0.1ms Pulse Width. 3. 2mm below package base. 4. 5mm below package base.
Blue
Hyper Orange 350
Green
Units mW
30 160 5
50 195 5 -40C To +85C
30 150 5
mA mA V
260C For 3 Seconds 260C For 5 Seconds
SPEC NO: DSAB7357 APPROVED: J. Lu
REV NO: V.6 CHECKED: Allen Liu
DATE:MAR/14/2005 DRAWN:B.H.LI
PAGE: 2 OF 5 ERP: 1201000914
AAF5060PBESEEVG Blue
SPEC NO: DSAB7357 APPROVED: J. Lu
REV NO: V.6 CHECKED: Allen Liu
DATE:MAR/14/2005 DRAWN:B.H.LI
PAGE: 3 OF 5 ERP: 1201000914
Hyper Orange
SPEC NO: DSAB7357 APPROVED: J. Lu
REV NO: V.6 CHECKED: Allen Liu
DATE:MAR/14/2005 DRAWN:B.H.LI
PAGE: 4 OF 5 ERP: 1201000914
Green
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAB7357 APPROVED: J. Lu
REV NO: V.6 CHECKED: Allen Liu
DATE:MAR/14/2005 DRAWN:B.H.LI
PAGE: 5 OF 5 ERP: 1201000914

▲Up To Search▲

Price & Availability of AAF5060PBESEEVG

	To Download AAF5060PBESEEVG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .