|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Micrel, Inc. 3V LVTTL-TO-DIFFERENTIAL LVPECL AND DIFFERENTIAL LVPECL-TO-LVTTL TRANSLATOR ECL ProTM SY10EPT28L ECL ProTM SY100EPT28L SY10EPT28L SY100EPT28L FEATURES 3.3V 10% power supply Guaranteed AC parameters over temperature: fMAX > 275MHz (LVTTL) < 2ns LVPECL-to-LVTTL propagation delay < 600ps LVTTL-to-LVPECL propagation delay Internal 75k input pull-down resistors Industrial temperature range: -40C to +85C Available in 8-pin MSOP and SOIC packages ECL ProTM DESCRIPTION The SY10/100EPT28L is a differential LVPECL-toLVTTL translator and a LVTTL-to-differential LVPECL translator in a single package. Because LVPECL (Positive ECL) levels are used, only +3.3V and ground are required. The small outline 8-pin package and the dual translation design of the EPT28L makes it ideal for applications which are sending and receiving signals across a backplane. The 100k series includes temperature compensation. Thus, logic levels are constant over temperature. Data sheets and support documentation can be found on Micrel's web site at www.micrel.com. PIN NAMES Pin D_LVTTL Q_LVTTL D_LVPECL /D_LVPECL Q_LVPECL /Q_LVPECL VCC GND Function Low Voltage TTL Input Low Voltage TTL Output Low Voltage Differential PECL Inputs with 75k internal pull-down Low Voltage Differential PECL Outputs 3.3V Positive Supply Ground ECL Pro is a trademark of Micrel, Inc. M9999-111605 hbwhelp@micrel.com or (408) 955-1690 Rev.: C Amendment: /0 1 Issue Date: November 2005 Micrel, Inc. ECL ProTM SY10EPT28L SY100EPT28L PACKAGE/ORDERING INFORMATION Ordering Information(1) D_LVPECL 1 /D_LVPECL 2 LVPECL LVTTL 8 VCC 7 Q_LVTTL 6 D_LVTTL 5 GND Part Number SY10EPT28LZI SY10EPT28LZITR(2) SY100EPT28LZI SY100EPT28LZITR(2) SY10EPT28LKI SY10EPT28LKITR(2) SY100EPT28LKI SY100EPT28LKITR(2) SY10EPT28LZG(3) SY10EPT28LZGTR(2, 3) SY100EPT28LZG(3) SY100EPT28LZGTR(2, 3) SY10EPT28LKG(3) SY10EPT28LKGTR(2, 3) SY100EPT28LKG(3) SY100EPT28LKGTR(2, 3) Package Type Z8-1 Z8-1 Z8-1 Z8-1 K8-1 K8-1 K8-1 K8-1 Z8-1 Z8-1 Z8-1 Z8-1 K8-1 K8-1 K8-1 K8-1 Operating Range Industrial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Package Marking HEP28 HEP28 XEP28 XEP28 HP28 HP28 XP28 XP28 Lead Finish Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Q_LVPECL 3 /Q-LVPECL 4 TOP VIEW (Available in MSOP or SOIC package) HEP28 with NiPdAu Pb-Free bar-line indicator Pb-Free HEP28 with NiPdAu Pb-Free bar-line indicator Pb-Free XEP28 with NiPdAu Pb-Free bar-line indicator Pb-Free XEP28 with NiPdAu Pb-Free bar-line indicator Pb-Free HP28 with NiPdAu Pb-Free bar-line indicator Pb-Free HP28 with NiPdAu Pb-Free bar-line indicator Pb-Free XP28 with NiPdAu Pb-Free bar-line indicator Pb-Free XP28 with NiPdAu Pb-Free bar-line indicator Pb-Free Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-111605 hbwhelp@micrel.com or (408) 955-1690 2 Micrel, Inc. ECL ProTM SY10EPT28L SY100EPT28L ABSOLUTE MAXIMUM RATINGS(1) Symbol VCC VIN IOUT TA TLEAD Tstore JA Power Supply Voltage Input Voltage LVPECL Output Current Operating Temperature Range Lead Temperature (Soldering, 20sec.) Storage Temperature Range Package Thermal Resistance (Junction-to-Ambient) -Still-Air (SOIC) -500lfpm (SOIC) -Still-Air (MSOP) -500lfpm (MSOP) JC Package Thermal Resistance (Junction-to-Case) (SOIC) (MSOP) -Continuous -Surge Rating Value -0.5 to +3.8 0 to VCC 50 100 -40 to +85 +260 -65 to +150 160 109 206 155 39 39 Unit V V mV C C C C/W C/W C/W DC ELECTRICAL CHARACTERISTICS(2) TA = -40C Symbol VCC ICC Parameter Power Supply Voltage Power Supply Current Min. 3.0 -- Typ. 3.3 20 Max. 3.6 40 Min. 3.0 -- TA = +25C Typ. 3.3 22 Max. 3.6 40 Min. 3.0 -- TA = +85C Typ. 3.3 25 Max. 3.6 40 Unit V mA Condition LVPECL DC ELECTRICAL CHARACTERISTICS(2) VCC = 3.3V 10% TA = -40C Symbol VOH VOL VIH VIL IIH IIL CIN Notes: 1. Permanent device damage may occur if absolute maximum ratings are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum ratlng conditions for extended periods may affect device reliability. 10/100KEPT circuits are designed to meet the DC specifications shown in the above tables after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. Input and output parameters vary 1:1 with VCC. TA = +25C Max. 2415 2405 1615 1605 2415 2420 1690 1675 150 0.5 -- -- Min. 2230 2155 1430 1355 2155 2075 1430 1355 -- -- -- -- Typ. 2355 2280 1555 1480 -- -- -- -- -- -- 0.75 1.1 Max. 2480 2405 1680 1605 2480 2420 1755 1675 150 0.5 -- -- Min. 2290 2155 1490 1355 2215 2075 1490 1355 -- -- -- -- TA = +85C Typ. 2415 2280 1615 1480 -- -- -- -- -- -- -- -- Max. 2540 2405 1740 1605 2540 2420 1815 1675 150 0.5 -- -- Unit mV mV mV mV A A pF pF Condition Note 3 Note 3 Note 3 Note 3 VIN = 3.46V Parameter Output HIGH Voltage Output LOW Voltage Input HIGH Voltage Input LOW Voltage Input HIGH Current Input LOW Current Input Capacitance /D, D (SOIC) (MSOP) 10EPT 100EPT 10EPT 100EPT 10EPT 100EPT 10EPT 100EPT Min. 2165 2155 1365 1355 2090 2075 1365 1355 -- 0.5 -- -- Typ. 2290 2280 1490 1480 -- -- -- -- -- -- -- -- 2. 3. M9999-111605 hbwhelp@micrel.com or (408) 955-1690 3 Micrel, Inc. ECL ProTM SY10EPT28L SY100EPT28L LVTTL DC ELECTRICAL CHARACTERISTICS(4) VCC = 3.3V 10% TA = -40C Symbol VOH VOL VIH VIL VIK IIH IIL IOUT(SC) CIN Parameter Output HIGH Voltage Output LOW Voltage Input HIGH Voltage Input LOW Voltage Input Clamp Voltage Input HIGH Current Min. 2.0 -- 2.0 -- -- -- -- Input LOW Current LVTTL Output Short-Circuit Current Input Capacitance (SOIC) (MSOP) -- -275 -- -- Typ. -- -- -- -- -- -- -- -- -- Max. -- 0.5 -- 0.8 -1.2 20 100 -0.2 -80 -- -- Min. 2.0 -- 2.0 -- -- -- -- -- -275 -- -- TA = +25C Typ. -- -- -- -- -- -- -- -- -- 0.75 1.1 Max. -- 0.5 -- 0.8 -1.2 20 100 -0.2 -80 -- -- Min. 2.0 -- 2.0 -- -- -- -- -- -275 -- -- TA = +85C Typ. -- -- -- -- -- -- -- -- -- Max. -- 0.5 -- 0.8 -1.2 20 100 -0.2 -80 -- -- Unit V V V V V A A A mA pF pF IIK = -18mA VIN = 2.7V VIN = VCC VIN = 0.5V VOUT = 0V Condition IOH = -3mA IOH = -24mA AC ELECTRICAL CHARACTERISTICS(4) VCC = +3.3V 10% TA = -40C Symbol fMAX Parameter Maximum Frequency LVPECL LVTTL Propagation Delay D_LVPECL Q_LVTTL Q_LVTTL D_LVPECL VCMR VPP LVPECL Common Mode Range LVPECL Input Voltage Swing (Single-Ended) LVPECL Output Rise/Fall Times (20% to 80%) LVTTL Output Rise/Fall Times (10% to 90%) Duty Cycle Cycle-to-Cycle Jitter (rms) Min. 700 275 1.5 100 1.2 Typ. -- 350 -- 400 -- Max. -- -- 2.5 600 VCC -- 500 1.0 55 <1 Min. 700 275 1.5 100 1.2 TA = +25C Typ. -- 350 -- 400 -- Max. -- -- 2.5 600 VCC -- 500 1.0 55 <1 Min. 700 275 1.5 100 1.2 TA = +85C Typ. -- 350 -- 400 -- Max. -- -- 2.5 600 VCC -- 500 1.0 55 <1 Unit MHz MHz ns ps V Condition Output Toggle Frequency CL = 20pF 50 to VCC-2.0 tPLH tPHL 100 200 0.5 45 -- -- -- -- 50 0.2 100 200 0.5 45 -- -- -- -- 50 0.2 100 200 0.5 45 -- -- -- -- 50 0.2 mV ns ns % ps Note 5 50 to VCC-2.0 t r, t f CL = 20pF tDC tJITTER RMS 4. 10/100KEPT circuits are designed to meet the DC specifications shown in the above tables after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. 5. VPP (min) is the minimum input swing for which AC parameters are guaranteed. M9999-111605 hbwhelp@micrel.com or (408) 955-1690 4 Micrel, Inc. ECL ProTM SY10EPT28L SY100EPT28L TERMINATION RECOMMENDATIONS +3.3V +3.3V ZO = 50 ZO = 50 R1 130 R1 130 +3.3V R2 82 R2 82 Vt = VCC --2V Figure 1. LVPECL Parallel Termination-Thevenin Equivalent +3.3V Z = 50 Z = 50 50 50 +3.3V source Rb destination Figure 2. LVPECL Three-Resistor "Y-Termination" Notes: 1. 2. 3. Power-saving alternative to 4-resistor, Thevenin termination. Place termination resistors as close to destination inputs as possible. Rb resistor sets the DC bias voltage, equal to Vt. For 3.3V supply, Rb value is between 46 to 50. M9999-111605 hbwhelp@micrel.com or (408) 955-1690 5 Micrel, Inc. ECL ProTM SY10EPT28L SY100EPT28L 8-PIN MSOP (K8-1) Rev. 01 M9999-111605 hbwhelp@micrel.com or (408) 955-1690 6 Micrel, Inc. ECL ProTM SY10EPT28L SY100EPT28L 8-PIN SOIC .150" WIDE (Z8-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL USA + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2005 Micrel, Incorporated. M9999-111605 hbwhelp@micrel.com or (408) 955-1690 7 |
Price & Availability of SY10EPT28LZITR |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |